mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 07/19] phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC
Date: Tue, 11 Aug 2015 21:27:06 +0530	[thread overview]
Message-ID: <1439308638-14582-8-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1439308638-14582-1-git-send-email-kishon@ti.com>

From: Hans de Goede <hdegoede@redhat.com>

The usb-phys on the sun8i-a33 SoC are mostly the same as sun8i-a23 but for
some reason (hw bug?) the phyctl register was moved to a different address
and is not initialized to 0 on reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/sun4i-usb-phy.txt      |    1 +
 drivers/phy/phy-sun4i-usb.c                        |   39 ++++++++++++++------
 2 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index f0c640a..5f48979 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -8,6 +8,7 @@ Required properties:
   * allwinner,sun6i-a31-usb-phy
   * allwinner,sun7i-a20-usb-phy
   * allwinner,sun8i-a23-usb-phy
+  * allwinner,sun8i-a33-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
   * "phy_ctrl"
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 00424dd..ddc3995 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,9 +40,10 @@
 #include <linux/workqueue.h>
 
 #define REG_ISCR			0x00
-#define REG_PHYCTL			0x04
+#define REG_PHYCTL_A10			0x04
 #define REG_PHYBIST			0x08
 #define REG_PHYTUNE			0x0c
+#define REG_PHYCTL_A33			0x10
 
 #define PHYCTL_DATA			BIT(7)
 
@@ -90,6 +91,7 @@ struct sun4i_usb_phy_data {
 	struct mutex mutex;
 	int num_phys;
 	u32 disc_thresh;
+	bool has_a33_phyctl;
 	struct sun4i_usb_phy {
 		struct phy *phy;
 		void __iomem *pmu;
@@ -152,37 +154,46 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 {
 	struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
 	u32 temp, usbc_bit = BIT(phy->index * 2);
+	void *phyctl;
 	int i;
 
 	mutex_lock(&phy_data->mutex);
 
+	if (phy_data->has_a33_phyctl) {
+		phyctl = phy_data->base + REG_PHYCTL_A33;
+		/* A33 needs us to set phyctl to 0 explicitly */
+		writel(0, phyctl);
+	} else {
+		phyctl = phy_data->base + REG_PHYCTL_A10;
+	}
+
 	for (i = 0; i < len; i++) {
-		temp = readl(phy_data->base + REG_PHYCTL);
+		temp = readl(phyctl);
 
 		/* clear the address portion */
 		temp &= ~(0xff << 8);
 
 		/* set the address */
 		temp |= ((addr + i) << 8);
-		writel(temp, phy_data->base + REG_PHYCTL);
+		writel(temp, phyctl);
 
 		/* set the data bit and clear usbc bit*/
-		temp = readb(phy_data->base + REG_PHYCTL);
+		temp = readb(phyctl);
 		if (data & 0x1)
 			temp |= PHYCTL_DATA;
 		else
 			temp &= ~PHYCTL_DATA;
 		temp &= ~usbc_bit;
-		writeb(temp, phy_data->base + REG_PHYCTL);
+		writeb(temp, phyctl);
 
 		/* pulse usbc_bit */
-		temp = readb(phy_data->base + REG_PHYCTL);
+		temp = readb(phyctl);
 		temp |= usbc_bit;
-		writeb(temp, phy_data->base + REG_PHYCTL);
+		writeb(temp, phyctl);
 
-		temp = readb(phy_data->base + REG_PHYCTL);
+		temp = readb(phyctl);
 		temp &= ~usbc_bit;
-		writeb(temp, phy_data->base + REG_PHYCTL);
+		writeb(temp, phyctl);
 
 		data >>= 1;
 	}
@@ -443,7 +454,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, data);
 
 	if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
-	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy"))
+	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
+	    of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
 		data->num_phys = 2;
 	else
 		data->num_phys = 3;
@@ -455,11 +467,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		data->disc_thresh = 3;
 
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
-	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy"))
+	    of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
+	    of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
 		dedicated_clocks = true;
 	else
 		dedicated_clocks = false;
 
+	if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
+		data->has_a33_phyctl = true;
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
 	data->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(data->base))
@@ -591,6 +607,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-usb-phy" },
 	{ .compatible = "allwinner,sun7i-a20-usb-phy" },
 	{ .compatible = "allwinner,sun8i-a23-usb-phy" },
+	{ .compatible = "allwinner,sun8i-a33-usb-phy" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
1.7.9.5


  parent reply	other threads:[~2015-08-11 16:01 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-11 15:56 [GIT PULL 00/19] phy: for 4.3 Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 01/19] phy: add lpc18xx usb otg phy driver Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 02/19] phy: dt bindings: add NXP LPC18xx/43xx USB OTG PHY bindings Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 03/19] phy-sun4i-usb: Add id and vbus detection support for the otg phy (phy0) Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 04/19] phy-sun4i-usb: Add extcon " Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 05/19] phy-sun4i-usb: Swap check for disconnect threshold Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 06/19] phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC Kishon Vijay Abraham I
2015-08-11 15:57 ` Kishon Vijay Abraham I [this message]
2015-08-11 15:57 ` [PATCH 08/19] phy-sun4i-usb: Add support for boards with broken Vusb-detection Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 09/19] phy-sun4i-usb: Add support for monitoring vbus via a power-supply Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 10/19] phy: berlin: .owner field is setup by core Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 11/19] phy: berlin: Do not use sata name in usb phy driver Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 12/19] phy: berlin: Trivial coding style cleanup Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 13/19] phy: Drop owner assignment from i2c_driver Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 14/19] phy: Drop owner assignment from platform_driver Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 15/19] phy-sun4i-sub: Move vbus-detect helper functions up in the file Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 16/19] phy-sun4i-usb: Only check vbus-det on power-on on boards with vbus-det Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 17/19] phy: ulpi_phy: Add const qualifier to ops Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 18/19] phy: Constify struct phy_ops variables Kishon Vijay Abraham I
2015-08-11 15:57 ` [PATCH 19/19] phy: lpc18xx-usb-otg: fix clock order in phy init Kishon Vijay Abraham I
2015-08-14 23:47 ` [GIT PULL 00/19] phy: for 4.3 Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439308638-14582-8-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®