From: Chase Metzger <chasemetzger15@gmail.com>
To: gregkh@linuxfoundation.org
Cc: stern@rowland.harvard.edu, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, baolu.lu@linux.intel.com,
pmladek@suse.cz, jin.can.zhuang@intel.com,
peter.chen@freescale.com,
Chase Metzger <chasemetzger15@gmail.com>
Subject: [PATCH] usb: core: hub: Removed some warnings generated by checkpatch.pl
Date: Tue, 11 Aug 2015 21:34:37 -0700 [thread overview]
Message-ID: <1439354077-10512-1-git-send-email-chasemetzger15@gmail.com> (raw)
Removed some checkpatch.pl warnings saying there was an unwanted space between
function names and their arguments.
Signed-off-by: Chase Metzger <chasemetzger15@gmail.com>
---
drivers/usb/core/hub.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9387cc20..38cb6d3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1442,8 +1442,8 @@ static int hub_configure(struct usb_hub *hub,
break;
}
- spin_lock_init (&hub->tt.lock);
- INIT_LIST_HEAD (&hub->tt.clear_list);
+ spin_lock_init(&hub->tt.lock);
+ INIT_LIST_HEAD(&hub->tt.clear_list);
INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case USB_HUB_PR_FS:
@@ -1632,7 +1632,7 @@ static int hub_configure(struct usb_hub *hub,
return 0;
fail:
- dev_err (hub_dev, "config failed, %s (err %d)\n",
+ dev_err(hub_dev, "config failed, %s (err %d)\n",
message, ret);
/* hub_disconnect() frees urb and descriptor */
return ret;
@@ -1775,7 +1775,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
if ((desc->desc.bInterfaceSubClass != 0) &&
(desc->desc.bInterfaceSubClass != 1)) {
descriptor_error:
- dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
+ dev_err(&intf->dev, "bad descriptor, ignoring hub\n");
return -EIO;
}
@@ -1790,11 +1790,11 @@ descriptor_error:
goto descriptor_error;
/* We found a hub */
- dev_info (&intf->dev, "USB hub found\n");
+ dev_info(&intf->dev, "USB hub found\n");
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
- dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
+ dev_dbg(&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
@@ -1807,7 +1807,7 @@ descriptor_error:
usb_get_intf(intf);
usb_get_dev(hdev);
- usb_set_intfdata (intf, hub);
+ usb_set_intfdata(intf, hub);
intf->needs_remote_wakeup = 1;
pm_suspend_ignore_children(&intf->dev, true);
@@ -1820,14 +1820,14 @@ descriptor_error:
if (hub_configure(hub, endpoint) >= 0)
return 0;
- hub_disconnect (intf);
+ hub_disconnect(intf);
return -ENODEV;
}
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
- struct usb_device *hdev = interface_to_usbdev (intf);
+ struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
/* assert ifno == 0 (part of hub spec) */
@@ -2143,7 +2143,7 @@ void usb_disconnect(struct usb_device **pdev)
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
- dev_dbg (&udev->dev, "unregistering device\n");
+ dev_dbg(&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
usb_hcd_synchronize_unlinks(udev);
@@ -2242,7 +2242,7 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
struct usb_bus *bus = udev->bus;
/* descriptor may appear anywhere in config */
- if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
+ if (__usb_get_extra_descriptor(udev->rawdescriptors[0],
le16_to_cpu(udev->config[0].desc.wTotalLength),
USB_DT_OTG, (void **) &desc) == 0) {
if (desc->bmAttributes & USB_OTG_HNP) {
@@ -3526,7 +3526,7 @@ static int check_ports_changed(struct usb_hub *hub)
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
- struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
int status;
--
2.1.4
next reply other threads:[~2015-08-12 4:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 4:34 Chase Metzger [this message]
2015-08-15 4:41 Chase Metzger
2015-08-15 5:10 ` Lars Melin
2015-08-19 3:36 Chase Metzger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439354077-10512-1-git-send-email-chasemetzger15@gmail.com \
--to=chasemetzger15@gmail.com \
--cc=baolu.lu@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jin.can.zhuang@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@freescale.com \
--cc=pmladek@suse.cz \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®