mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: Markus Pargmann <mpa@pengutronix.de>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Vlad Dogaru <vlad.dogaru@intel.com>,
	Paul Bolle <pebolle@tiscali.nl>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel@pengutronix.de
Subject: Re: [PATCH v3 5/6] iio: bmg160: Separate i2c and core driver
Date: Wed, 12 Aug 2015 09:16:00 -0700	[thread overview]
Message-ID: <1439396160.2244.39.camel@spandruv-desk3.jf.intel.com> (raw)
In-Reply-To: <1439391009-6051-6-git-send-email-mpa@pengutronix.de>

On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
> This patch separates the core driver using regmap and the i2c driver
> which creates the i2c regmap. Also in the Kconfig file BMG160 and
> BMG160_I2C are separate now.
> 
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
>  drivers/iio/gyro/Kconfig                     | 18 +++++--
>  drivers/iio/gyro/Makefile                    |  2 +-
>  drivers/iio/gyro/bmg160.h                    | 10 ++++
>  drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 77 +++++-----------------------
>  drivers/iio/gyro/bmg160_i2c.c                | 71 +++++++++++++++++++++++++
>  5 files changed, 109 insertions(+), 69 deletions(-)
>  create mode 100644 drivers/iio/gyro/bmg160.h
>  rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%)
>  create mode 100644 drivers/iio/gyro/bmg160_i2c.c
> 
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index cf82d74139a2..13f8e0051615 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -51,17 +51,27 @@ config ADXRS450
>  	  will be called adxrs450.
>  
>  config BMG160
> -	tristate "BOSCH BMG160 Gyro Sensor"
> -	depends on I2C
> +	bool "BOSCH BMG160 Gyro Sensor"
>  	select IIO_BUFFER
>  	select IIO_TRIGGERED_BUFFER
> -	select REGMAP_I2C
>  	help
>  	  Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
>  	  driver. This driver also supports BMI055 gyroscope.
>  
> +if BMG160
> +
> +config BMG160_I2C
> +	tristate "Driver for connection via I2C"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
> +	  driver connected via I2C. This driver also supports BMI055 gyroscope.
> +
>  	  This driver can also be built as a module.  If so, the module
> -	  will be called bmg160.
> +	  will be called bmg160_i2c.
> +
> +endif
>  
>  config HID_SENSOR_GYRO_3D
>  	depends on HID_SENSOR_HUB
> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> index f46341b39139..73b41e43a974 100644
> --- a/drivers/iio/gyro/Makefile
> +++ b/drivers/iio/gyro/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_ADIS16130) += adis16130.o
>  obj-$(CONFIG_ADIS16136) += adis16136.o
>  obj-$(CONFIG_ADIS16260) += adis16260.o
>  obj-$(CONFIG_ADXRS450) += adxrs450.o
> -obj-$(CONFIG_BMG160) += bmg160.o
> +obj-$(CONFIG_BMG160_I2C) += bmg160_core.o bmg160_i2c.o
>  
>  obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
>  
> diff --git a/drivers/iio/gyro/bmg160.h b/drivers/iio/gyro/bmg160.h
> new file mode 100644
> index 000000000000..72db723c8fb6
> --- /dev/null
> +++ b/drivers/iio/gyro/bmg160.h
> @@ -0,0 +1,10 @@
> +#ifndef BMG160_H_
> +#define BMG160_H_
> +
> +extern const struct dev_pm_ops bmg160_pm_ops;
> +
> +int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
> +		      const char *name);
> +void bmg160_core_remove(struct device *dev);
> +
> +#endif  /* BMG160_H_ */
> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160_core.c
> similarity index 94%
> rename from drivers/iio/gyro/bmg160.c
> rename to drivers/iio/gyro/bmg160_core.c
> index 39df64fb4262..d64e3a87e0a1 100644
> --- a/drivers/iio/gyro/bmg160.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -13,7 +13,6 @@
>   */
>  
>  #include <linux/module.h>
> -#include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>  #include <linux/slab.h>
> @@ -30,7 +29,6 @@
>  #include <linux/iio/triggered_buffer.h>
>  #include <linux/regmap.h>
>  
> -#define BMG160_DRV_NAME		"bmg160"
>  #define BMG160_IRQ_NAME		"bmg160_event"
>  #define BMG160_GPIO_NAME		"gpio_int"
>  
> @@ -137,12 +135,6 @@ static const struct {
>  			   { 133, BMG160_RANGE_250DPS},
>  			   { 66, BMG160_RANGE_125DPS} };
>  
> -struct regmap_config bmg160_regmap_i2c_conf = {
> -	.reg_bits = 8,
> -	.val_bits = 8,
> -	.max_register = 0x3f
> -};
> -
>  static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
>  {
>  	int ret;
> @@ -996,31 +988,22 @@ static const char *bmg160_match_acpi_device(struct device *dev)
>  	return dev_name(dev);
>  }
>  
> -static int bmg160_probe(struct i2c_client *client,
> -			const struct i2c_device_id *id)
> +int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
> +		      const char *name)
>  {
>  	struct bmg160_data *data;
>  	struct iio_dev *indio_dev;
>  	int ret;
> -	const char *name = NULL;
> -	struct regmap *regmap;
> -	struct device *dev = &client->dev;
> -
> -	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
> -	if (IS_ERR(regmap)) {
> -		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> -			(int)PTR_ERR(regmap));
> -		return PTR_ERR(regmap);
> -	}
>  
> -	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
>  	if (!indio_dev)
>  		return -ENOMEM;
>  
>  	data = iio_priv(indio_dev);
>  	dev_set_drvdata(dev, indio_dev);
>  	data->dev = dev;
> -	data->irq = client->irq;
> +	data->irq = irq;
> +	data->regmap = regmap;
>  
>  	ret = bmg160_chip_init(data);
>  	if (ret < 0)
> @@ -1028,9 +1011,6 @@ static int bmg160_probe(struct i2c_client *client,
>  
>  	mutex_init(&data->mutex);
>  
> -	if (id)
> -		name = id->name;
> -
>  	if (ACPI_HANDLE(dev))
>  		name = bmg160_match_acpi_device(dev);
>  
> @@ -1125,15 +1105,16 @@ err_trigger_unregister:
>  
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(bmg160_core_probe);
>  
> -static int bmg160_remove(struct i2c_client *client)
> +void bmg160_core_remove(struct device *dev)
>  {
> -	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct bmg160_data *data = iio_priv(indio_dev);
>  
> -	pm_runtime_disable(&client->dev);
> -	pm_runtime_set_suspended(&client->dev);
> -	pm_runtime_put_noidle(&client->dev);
> +	pm_runtime_disable(dev);
> +	pm_runtime_set_suspended(dev);
> +	pm_runtime_put_noidle(dev);
>  
>  	iio_device_unregister(indio_dev);
>  	iio_triggered_buffer_cleanup(indio_dev);
> @@ -1146,9 +1127,8 @@ static int bmg160_remove(struct i2c_client *client)
>  	mutex_lock(&data->mutex);
>  	bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
>  	mutex_unlock(&data->mutex);
> -
> -	return 0;
>  }
> +EXPORT_SYMBOL_GPL(bmg160_core_remove);
>  
>  #ifdef CONFIG_PM_SLEEP
>  static int bmg160_suspend(struct device *dev)
> @@ -1210,40 +1190,9 @@ static int bmg160_runtime_resume(struct device *dev)
>  }
>  #endif
>  
> -static const struct dev_pm_ops bmg160_pm_ops = {
> +const struct dev_pm_ops bmg160_pm_ops = {
>  	SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
>  	SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
>  			   bmg160_runtime_resume, NULL)
>  };
>  
> -static const struct acpi_device_id bmg160_acpi_match[] = {
> -	{"BMG0160", 0},
> -	{"BMI055B", 0},
> -	{},
> -};
> -
> -MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
> -
> -static const struct i2c_device_id bmg160_id[] = {
> -	{"bmg160", 0},
> -	{"bmi055_gyro", 0},
> -	{}
> -};
> -
> -MODULE_DEVICE_TABLE(i2c, bmg160_id);
> -
> -static struct i2c_driver bmg160_driver = {
> -	.driver = {
> -		.name	= BMG160_DRV_NAME,
> -		.acpi_match_table = ACPI_PTR(bmg160_acpi_match),
> -		.pm	= &bmg160_pm_ops,
> -	},
> -	.probe		= bmg160_probe,
> -	.remove		= bmg160_remove,
> -	.id_table	= bmg160_id,
> -};
> -module_i2c_driver(bmg160_driver);
> -
> -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
> -MODULE_LICENSE("GPL v2");
> -MODULE_DESCRIPTION("BMG160 Gyro driver");
> diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
> new file mode 100644
> index 000000000000..90126a5a7663
> --- /dev/null
> +++ b/drivers/iio/gyro/bmg160_i2c.c
> @@ -0,0 +1,71 @@
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/acpi.h>
> +
> +#include "bmg160.h"
> +
> +static const struct regmap_config bmg160_regmap_i2c_conf = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = 0x3f
> +};
> +
> +static int bmg160_i2c_probe(struct i2c_client *client,
> +			    const struct i2c_device_id *id)
> +{
> +	struct regmap *regmap;
> +	const char *name = NULL;
> +
> +	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> +			(int)PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	if (id)
> +		name = id->name;
> +
> +	return bmg160_core_probe(&client->dev, regmap, client->irq, name);
> +}
> +
> +static int bmg160_i2c_remove(struct i2c_client *client)
> +{
> +	bmg160_core_remove(&client->dev);
> +
> +	return 0;
> +}
> +
> +static const struct acpi_device_id bmg160_acpi_match[] = {
> +	{"BMG0160", 0},
> +	{"BMI055B", 0},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
> +
> +static const struct i2c_device_id bmg160_i2c_id[] = {
> +	{"bmg160", 0},
> +	{"bmi055_gyro", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, bmg160_i2c_id);
> +
> +static struct i2c_driver bmg160_i2c_driver = {
> +	.driver = {
> +		.name	= "bmg160_i2c",
> +		.acpi_match_table = ACPI_PTR(bmg160_acpi_match),
> +		.pm	= &bmg160_pm_ops,
> +	},
> +	.probe		= bmg160_i2c_probe,
> +	.remove		= bmg160_i2c_remove,
> +	.id_table	= bmg160_i2c_id,
> +};
> +module_i2c_driver(bmg160_i2c_driver);
> +
> +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMG160 I2C Gyro driver");



  reply	other threads:[~2015-08-12 16:22 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-12 14:50 [PATCH v3 0/6] iio: bmg160: Add SPI connection Markus Pargmann
2015-08-12 14:50 ` [PATCH v3 1/6] iio: bmg160: Use i2c regmap instead of direct i2c access Markus Pargmann
2015-08-12 16:01   ` Srinivas Pandruvada
2015-08-15 14:41     ` Jonathan Cameron
2015-08-15 14:43       ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 2/6] iio: bmg160: Remove i2c_client from data struct Markus Pargmann
2015-08-12 16:03   ` Srinivas Pandruvada
2015-08-15 14:50     ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 3/6] iio: bmg160: Use generic dev_drvdata Markus Pargmann
2015-08-12 16:05   ` Srinivas Pandruvada
2015-08-15 14:50     ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 4/6] iio: bmg160: Remove remaining uses of i2c_client Markus Pargmann
2015-08-12 16:08   ` Srinivas Pandruvada
2015-08-15 14:53     ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 5/6] iio: bmg160: Separate i2c and core driver Markus Pargmann
2015-08-12 16:16   ` Srinivas Pandruvada [this message]
2015-08-15 14:59     ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 6/6] iio: bmg160: Add SPI driver Markus Pargmann
2015-08-12 15:19   ` Peter Meerwald
2015-08-15 15:03     ` Jonathan Cameron
2015-08-17  6:41       ` Markus Pargmann
2015-08-17  6:39     ` Markus Pargmann
2015-08-12 15:04 ` [PATCH v3 0/6] iio: bmg160: Add SPI connection Lars-Peter Clausen
2015-08-15 14:49   ` Jonathan Cameron
2015-08-17  9:27   ` Tirdea, Irina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439396160.2244.39.camel@spandruv-desk3.jf.intel.com \
    --to=srinivas.pandruvada@linux.intel.com \
    --cc=jic23@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=pebolle@tiscali.nl \
    --cc=vlad.dogaru@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®