From: Alexis Ballier <aballier@gentoo.org>
To: linux-samsung-soc@vger.kernel.org
Cc: Alexis Ballier <aballier@gentoo.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Kukjin Kim <kgene@kernel.org>,
Russell King <linux@arm.linux.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>
Subject: [PATCH v2] ARM: dts: exynos4412-odroidu3: Enable SPI1.
Date: Thu, 13 Aug 2015 11:06:53 +0200 [thread overview]
Message-ID: <1439456813-4918-1-git-send-email-aballier@gentoo.org> (raw)
SPI1 is available on IO Port #2 (as depicted on their website) in
PCB Revision 0.5 of Hardkernel Odroid U3 board.
The shield connects a 256KiB spi-nor flash on that bus.
Signed-off-by: Alexis Ballier <aballier@gentoo.org>
---
Changes in v2: Use GPIO_ACTIVE_HIGH (Krzysztof Kozlowski)
arch/arm/boot/dts/exynos4412-odroidu3.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 44684e5..8632f35 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos4412-odroid-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Hardkernel ODROID-U3 board based on Exynos4412";
@@ -61,3 +62,10 @@
"Speakers", "SPKL",
"Speakers", "SPKR";
};
+
+&spi_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
2.5.0
next reply other threads:[~2015-08-13 9:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 9:06 Alexis Ballier [this message]
2015-08-13 10:14 ` Krzysztof Kozlowski
2015-08-13 10:17 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439456813-4918-1-git-send-email-aballier@gentoo.org \
--to=aballier@gentoo.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®