From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>,
linux-pwm@vger.kernel.org
Subject: [PATCH v4 4/4] misc: atmel_tclib: get and use slow clock
Date: Sun, 16 Aug 2015 11:23:46 +0200 [thread overview]
Message-ID: <1439717026-30634-5-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1439717026-30634-1-git-send-email-alexandre.belloni@free-electrons.com>
From: Boris Brezillon <boris.brezillon@free-electrons.com>
Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system
hang") added a workaround for the slow clock as it is not properly handled
by its users.
Get and use the slow clock as it is necessary for the timer counters.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-pwm@vger.kernel.org
drivers/clocksource/tcb_clksrc.c | 10 +++++++++-
drivers/misc/atmel_tclib.c | 4 ++++
drivers/pwm/pwm-atmel-tcb.c | 26 +++++++++++++++++++-------
include/linux/atmel_tc.h | 1 +
4 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index b9b7277173c2..ba1e5d55d3bf 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -184,10 +184,17 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
struct clk *t2_clk = tc->clk[2];
int irq = tc->irq[2];
+ ret = clk_prepare_enable(tc->slow_clk);
+ if (ret)
+ return ret;
+
/* try to enable t2 clk to avoid future errors in mode change */
ret = clk_prepare_enable(t2_clk);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(tc->slow_clk);
return ret;
+ }
+
clk_disable(t2_clk);
clkevt.regs = tc->regs;
@@ -200,6 +207,7 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
if (ret) {
clk_unprepare(t2_clk);
+ clk_disable_unprepare(tc->slow_clk);
return ret;
}
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 0ca05c3ec8d6..ac24a4bd63f7 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -125,6 +125,10 @@ static int __init tc_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
+ tc->slow_clk = devm_clk_get(&pdev->dev, "slow_clk");
+ if (IS_ERR(tc->slow_clk))
+ return PTR_ERR(tc->slow_clk);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tc->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(tc->regs))
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index d14e0677c92d..f64ee392f620 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -305,7 +305,7 @@ static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
*/
if (i == 5) {
i = slowclk;
- rate = 32768;
+ rate = clk_get_rate(tc->slow_clk);
min = div_u64(NSEC_PER_SEC, rate);
max = min << tc->tcb_config->counter_width;
@@ -387,9 +387,9 @@ static int atmel_tcb_pwm_probe(struct platform_device *pdev)
tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
if (tcbpwm == NULL) {
- atmel_tc_free(tc);
+ err = -ENOMEM;
dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
+ goto err_free_tc;
}
tcbpwm->chip.dev = &pdev->dev;
@@ -400,17 +400,27 @@ static int atmel_tcb_pwm_probe(struct platform_device *pdev)
tcbpwm->chip.npwm = NPWM;
tcbpwm->tc = tc;
+ err = clk_prepare_enable(tc->slow_clk);
+ if (err)
+ goto err_free_tc;
+
spin_lock_init(&tcbpwm->lock);
err = pwmchip_add(&tcbpwm->chip);
- if (err < 0) {
- atmel_tc_free(tc);
- return err;
- }
+ if (err < 0)
+ goto err_disable_clk;
platform_set_drvdata(pdev, tcbpwm);
return 0;
+
+err_disable_clk:
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
+err_free_tc:
+ atmel_tc_free(tc);
+
+ return err;
}
static int atmel_tcb_pwm_remove(struct platform_device *pdev)
@@ -418,6 +428,8 @@ static int atmel_tcb_pwm_remove(struct platform_device *pdev)
struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
int err;
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
err = pwmchip_remove(&tcbpwm->chip);
if (err < 0)
return err;
diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
index b87c1c7c242a..468fdfa643f0 100644
--- a/include/linux/atmel_tc.h
+++ b/include/linux/atmel_tc.h
@@ -67,6 +67,7 @@ struct atmel_tc {
const struct atmel_tcb_config *tcb_config;
int irq[3];
struct clk *clk[3];
+ struct clk *slow_clk;
struct list_head node;
bool allocated;
};
--
2.1.4
next prev parent reply other threads:[~2015-08-16 9:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-16 9:23 [PATCH v4 0/4] ARM: at91: Properly handle " Alexandre Belloni
2015-08-16 9:23 ` [PATCH v4 1/4] watchdog: at91sam9: get and use " Alexandre Belloni
2015-08-16 9:23 ` [PATCH v4 2/4] clocksource: atmel-st: " Alexandre Belloni
2015-08-16 9:23 ` [PATCH v4 3/4] clocksource: tcb_clksrc: fix setup_clkevents error path Alexandre Belloni
2015-08-16 9:23 ` Alexandre Belloni [this message]
2015-08-19 21:24 ` [PATCH v4 4/4] misc: atmel_tclib: get and use slow clock Daniel Lezcano
2015-10-05 15:27 ` Thierry Reding
2015-10-05 16:58 ` Alexandre Belloni
2015-10-06 7:33 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439717026-30634-5-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®