mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Denys Vlasenko <dvlasenk@redhat.com>
To: Ingo Molnar <mingo@kernel.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
	Borislav Petkov <bp@alien8.de>, "H. Peter Anvin" <hpa@zytor.com>,
	Andy Lutomirski <luto@amacapital.net>,
	Kees Cook <keescook@chromium.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] x86/math-emu: Remove !NO_UNDOC_CODE
Date: Thu, 27 Aug 2015 20:15:28 +0200	[thread overview]
Message-ID: <1440699330-1305-1-git-send-email-dvlasenk@redhat.com> (raw)

We always want to support all FPU opcodes, including undocumented ones.
That define was fully justified ~20 years ago but not today.
Let's not complicate code with it.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Ingo Molnar <mingo@kernel.org>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Kees Cook <keescook@chromium.org>
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
---
 arch/x86/math-emu/fpu_entry.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 3d8f2e4..929b1d5 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -40,8 +40,6 @@
 
 #define __BAD__ FPU_illegal	/* Illegal on an 80486, causes SIGILL */
 
-#ifndef NO_UNDOC_CODE		/* Un-documented FPU op-codes supported by default. */
-
 /* WARNING: These codes are not documented by Intel in their 80486 manual
    and may not work on FPU clones or later Intel FPUs. */
 
@@ -68,21 +66,6 @@ static FUNC const st_instr_table[64] = {
 	fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
 };
 
-#else /* Support only documented FPU op-codes */
-
-static FUNC const st_instr_table[64] = {
-	fadd__, fld_i_, __BAD__, __BAD__, fadd_i, ffree_, faddp_, __BAD__,
-	fmul__, fxch_i, __BAD__, __BAD__, fmul_i, __BAD__, fmulp_, __BAD__,
-	fcom_st, fp_nop, __BAD__, __BAD__, __BAD__, fst_i_, __BAD__, __BAD__,
-	fcompst, __BAD__, __BAD__, __BAD__, __BAD__, fstp_i, fcompp, __BAD__,
-	fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
-	fsubr_, fconst, fucompp, __BAD__, fsub_i, fucomp, fsubp_, __BAD__,
-	fdiv__, FPU_triga, __BAD__, __BAD__, fdivri, __BAD__, fdivrp, __BAD__,
-	fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
-};
-
-#endif /* NO_UNDOC_CODE */
-
 #define _NONE_ 0		/* Take no special action */
 #define _REG0_ 1		/* Need to check for not empty st(0) */
 #define _REGI_ 2		/* Need to check for not empty st(0) and st(rm) */
@@ -94,10 +77,6 @@ static FUNC const st_instr_table[64] = {
 #define _REGIc 0		/* Compare st(0) and st(rm) */
 #define _REGIn 0		/* Uses st(0) and st(rm), but handle checks later */
 
-#ifndef NO_UNDOC_CODE
-
-/* Un-documented FPU op-codes supported by default. (see above) */
-
 static u_char const type_table[64] = {
 	_REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _REGi_,
 	_REGI_, _REGIn, _null_, _null_, _REGIi, _REGI_, _REGIp, _REGI_,
@@ -109,21 +88,6 @@ static u_char const type_table[64] = {
 	_REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
 };
 
-#else /* Support only documented FPU op-codes */
-
-static u_char const type_table[64] = {
-	_REGI_, _NONE_, _null_, _null_, _REGIi, _REGi_, _REGIp, _null_,
-	_REGI_, _REGIn, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
-	_REGIc, _NONE_, _null_, _null_, _null_, _REG0_, _null_, _null_,
-	_REGIc, _null_, _null_, _null_, _null_, _REG0_, _REGIc, _null_,
-	_REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
-	_REGI_, _NONE_, _REGIc, _null_, _REGIi, _REGIc, _REGIp, _null_,
-	_REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
-	_REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_
-};
-
-#endif /* NO_UNDOC_CODE */
-
 #ifdef RE_ENTRANT_CHECKING
 u_char emulating = 0;
 #endif /* RE_ENTRANT_CHECKING */
-- 
1.8.1.4


             reply	other threads:[~2015-08-27 18:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-27 18:15 Denys Vlasenko [this message]
2015-08-27 18:15 ` [PATCH 2/3] x86/math-emu: Add support for FCMOVcc and F[U]COMI[P] insns Denys Vlasenko
2015-08-27 18:15 ` [PATCH 3/3] x86/math-emu: Remove define layer for undocumented opcodes Denys Vlasenko
2015-08-28  5:25   ` Ingo Molnar
2015-09-15  7:07 ` [tip:x86/fpu] x86/fpu/math-emu: Remove !NO_UNDOC_CODE tip-bot for Denys Vlasenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440699330-1305-1-git-send-email-dvlasenk@redhat.com \
    --to=dvlasenk@redhat.com \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=mingo@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®