From: WingMan Kwok <w-kwok2@ti.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <linux@arm.linux.org.uk>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <ssantosh@kernel.org>
Cc: <m-karicheri2@ti.com>, WingMan Kwok <w-kwok2@ti.com>
Subject: [PATCH] ARM: dts: keystone: use one to one address translations under netcp
Date: Tue, 1 Sep 2015 16:28:44 -0400 [thread overview]
Message-ID: <1441139324-29296-1-git-send-email-w-kwok2@ti.com> (raw)
Network subsystem NetCP in Keystone-2 devices includes some HW blocks
that are memory mapped to ranges outside that of the NetCP itself.
Thus address space of a child node of the NetCP node needs to be
mapped 1:1 onto the parent address space. Hence empty ranges
should be used under the NetCP node.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
---
arch/arm/boot/dts/k2e-netcp.dtsi | 8 +++-----
arch/arm/boot/dts/k2hk-netcp.dtsi | 14 ++++++--------
arch/arm/boot/dts/k2l-netcp.dtsi | 8 +++-----
3 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi
index b13b3c9..e103ed9 100644
--- a/arch/arm/boot/dts/k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/k2e-netcp.dtsi
@@ -111,9 +111,7 @@ netcp: netcp@24000000 {
compatible = "ti,netcp-1.0";
#address-cells = <1>;
#size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x24000000 0x1000000>;
+ ranges;
clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
@@ -127,10 +125,10 @@ netcp: netcp@24000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gbe@200000 { /* ETHSS */
+ gbe@24200000 { /* ETHSS */
label = "netcp-gbe";
compatible = "ti,netcp-gbe-9";
- reg = <0x200000 0x900>, <0x220000 0x20000>;
+ reg = <0x24200000 0x900>, <0x24220000 0x20000>;
/* enable-ale; */
tx-queue = <896>;
tx-channel = "nettx";
diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi
index 77a32c3..3b885f5 100644
--- a/arch/arm/boot/dts/k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/k2hk-netcp.dtsi
@@ -127,9 +127,7 @@ netcp: netcp@2000000 {
compatible = "ti,netcp-1.0";
#address-cells = <1>;
#size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x2000000 0x100000>;
+ ranges;
clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
@@ -140,15 +138,15 @@ netcp: netcp@2000000 {
ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
netcp-devices {
- ranges;
#address-cells = <1>;
#size-cells = <1>;
- gbe@90000 { /* ETHSS */
- #address-cells = <1>;
- #size-cells = <1>;
+ ranges;
+ gbe@2090000 { /* ETHSS */
label = "netcp-gbe";
compatible = "ti,netcp-gbe";
- reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+ reg = <0x02090000 0x300>,
+ <0x02090400 0x400>,
+ <0x02090800 0x700>;
/* enable-ale; */
tx-queue = <648>;
tx-channel = "nettx";
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
index 6b95284..97ae805 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -110,9 +110,7 @@ netcp: netcp@26000000 {
compatible = "ti,netcp-1.0";
#address-cells = <1>;
#size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x26000000 0x1000000>;
+ ranges;
clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
@@ -126,10 +124,10 @@ netcp: netcp@26000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gbe@200000 { /* ETHSS */
+ gbe@26200000 { /* ETHSS */
label = "netcp-gbe";
compatible = "ti,netcp-gbe-5";
- reg = <0x200000 0x900>, <0x220000 0x20000>;
+ reg = <0x26200000 0x900>, <0x26220000 0x20000>;
/* enable-ale; */
tx-queue = <896>;
tx-channel = "nettx";
--
1.7.9.5
next reply other threads:[~2015-09-01 20:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-01 20:28 WingMan Kwok [this message]
2015-09-01 21:19 ` santosh.shilimkar
2015-09-02 15:31 ` Kwok, WingMan
2015-09-02 15:50 ` santosh shilimkar
2015-09-02 16:35 ` Murali Karicheri
2015-09-02 17:24 ` santosh shilimkar
2015-09-02 17:58 ` Murali Karicheri
2015-09-02 18:25 ` santosh shilimkar
2015-09-02 18:42 ` Murali Karicheri
2015-09-03 14:26 ` Tony Lindgren
2015-09-03 14:48 ` santosh.shilimkar
2015-09-03 19:18 ` Murali Karicheri
2015-09-08 15:13 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441139324-29296-1-git-send-email-w-kwok2@ti.com \
--to=w-kwok2@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=m-karicheri2@ti.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®