[PATCH] tracing: Fix rcu splat from idle CPU on boot.

[Philipp Schrader <philipp@peloton-tech.com>]

With PREEMPT_RT and most of the lockdep-related options enabled I
encountered this splat when booting our DRA7 evaluation module:

[    0.055073]
[    0.055076] ===============================
[    0.055079] [ INFO: suspicious RCU usage. ]
[    0.055084] 4.1.6+ #2 Not tainted
[    0.055086] -------------------------------
[    0.055090] include/trace/events/hist.h:31 suspicious
rcu_dereference_check() usage!
[    0.055093]
[    0.055093] other info that might help us debug this:
[    0.055093]
[    0.055097]
[    0.055097] RCU used illegally from idle CPU!
[    0.055097] rcu_scheduler_active = 1, debug_locks = 1
[    0.055100] RCU used illegally from extended quiescent state!
[    0.055104] no locks held by swapper/0/0.
[    0.055106]
[    0.055106] stack backtrace:
[    0.055112] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.6+ #2
[    0.055116] Hardware name: Generic DRA74X (Flattened Device Tree)
[    0.055130] [<c00196b8>] (unwind_backtrace) from [<c001515c>]
(show_stack+0x20/0x24)
[    0.055146] [<c001515c>] (show_stack) from [<c07bc408>]
(dump_stack+0x84/0xa0)
[    0.055160] [<c07bc408>] (dump_stack) from [<c009bc38>]
(lockdep_rcu_suspicious+0xb0/0x110)
[    0.055172] [<c009bc38>] (lockdep_rcu_suspicious) from [<c01246c4>]
(time_hardirqs_off+0x2b8/0x3c8)
[    0.055184] [<c01246c4>] (time_hardirqs_off) from [<c009a218>]
(trace_hardirqs_off_caller+0x2c/0xf4)
[    0.055194] [<c009a218>] (trace_hardirqs_off_caller) from
[<c009a2f4>] (trace_hardirqs_off+0x14/0x18)
[    0.055204] [<c009a2f4>] (trace_hardirqs_off) from [<c00c7ecc>]
(rcu_idle_enter+0x78/0xcc)
[    0.055213] [<c00c7ecc>] (rcu_idle_enter) from [<c0093eb0>]
(cpu_startup_entry+0x190/0x518)
[    0.055222] [<c0093eb0>] (cpu_startup_entry) from [<c07b95b4>]
(rest_init+0x13c/0x17c)
[    0.055231] [<c07b95b4>] (rest_init) from [<c0b32c74>]
(start_kernel+0x320/0x380)
[    0.055238] [<c0b32c74>] (start_kernel) from [<8000807c>] (0x8000807c)

As per Steve Rotstedt's suggestion I changed the trace_* calls to
trace_*_rcuidle calls. He pointed out that the trace points were getting
triggered when rcu wasn't watching.
---
 kernel/trace/trace_irqsoff.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index aaade2e..d0e1d0e 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -450,7 +450,7 @@ EXPORT_SYMBOL_GPL(stop_critical_timings);
 #ifdef CONFIG_PROVE_LOCKING
 void time_hardirqs_on(unsigned long a0, unsigned long a1)
 {
-	trace_preemptirqsoff_hist(IRQS_ON, 0);
+	trace_preemptirqsoff_hist_rcuidle(IRQS_ON, 0);
 	if (!preempt_trace() && irq_trace())
 		stop_critical_timing(a0, a1);
 }
@@ -459,7 +459,7 @@ void time_hardirqs_off(unsigned long a0, unsigned long a1)
 {
 	if (!preempt_trace() && irq_trace())
 		start_critical_timing(a0, a1);
-	trace_preemptirqsoff_hist(IRQS_OFF, 1);
+	trace_preemptirqsoff_hist_rcuidle(IRQS_OFF, 1);
 }
 
 #else /* !CONFIG_PROVE_LOCKING */
-- 
2.1.4