mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>,
	"Noralf Trønnes" <noralf@tronnes.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH 3/3] staging: fbtft: use pr_fmt
Date: Sat,  5 Sep 2015 19:13:45 +0530	[thread overview]
Message-ID: <1441460625-19026-3-git-send-email-sudipm.mukherjee@gmail.com> (raw)
In-Reply-To: <1441460625-19026-1-git-send-email-sudipm.mukherjee@gmail.com>

Instead of defining DRVNAME and using it in all calls to pr_* family of
macros lets start using pr_fmt.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
---
 drivers/staging/fbtft/fbtft_device.c | 79 ++++++++++++++++--------------------
 1 file changed, 35 insertions(+), 44 deletions(-)

diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
index 80ab918..029423e 100644
--- a/drivers/staging/fbtft/fbtft_device.c
+++ b/drivers/staging/fbtft/fbtft_device.c
@@ -13,6 +13,7 @@
  * GNU General Public License for more details.
  */
 
+#define pr_fmt(fmt) "fbtft_device: " fmt
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -21,8 +22,6 @@
 
 #include "fbtft.h"
 
-#define DRVNAME "fbtft_device"
-
 #define MAX_GPIOS 32
 
 static struct spi_device *spi_device;
@@ -1215,16 +1214,16 @@ static int spi_device_found(struct device *dev, void *data)
 {
 	struct spi_device *spi = container_of(dev, struct spi_device, dev);
 
-	pr_info(DRVNAME":      %s %s %dkHz %d bits mode=0x%02X\n",
-		spi->modalias, dev_name(dev), spi->max_speed_hz / 1000,
-		spi->bits_per_word, spi->mode);
+	pr_info("%s %s %dkHz %d bits mode=0x%02X\n", spi->modalias,
+		dev_name(dev), spi->max_speed_hz / 1000, spi->bits_per_word,
+		spi->mode);
 
 	return 0;
 }
 
 static void pr_spi_devices(void)
 {
-	pr_info(DRVNAME":  SPI devices registered:\n");
+	pr_info("SPI devices registered:\n");
 	bus_for_each_dev(&spi_bus_type, NULL, NULL, spi_device_found);
 }
 
@@ -1234,16 +1233,15 @@ static int p_device_found(struct device *dev, void *data)
 	*pdev = container_of(dev, struct platform_device, dev);
 
 	if (strstr(pdev->name, "fb"))
-		pr_info(DRVNAME":      %s id=%d pdata? %s\n",
-				pdev->name, pdev->id,
-				pdev->dev.platform_data ? "yes" : "no");
+		pr_info("%s id=%d pdata? %s\n", pdev->name, pdev->id,
+			pdev->dev.platform_data ? "yes" : "no");
 
 	return 0;
 }
 
 static void pr_p_devices(void)
 {
-	pr_info(DRVNAME":  'fb' Platform devices registered:\n");
+	pr_info("'fb' Platform devices registered:\n");
 	bus_for_each_dev(&platform_bus_type, NULL, NULL, p_device_found);
 }
 
@@ -1258,7 +1256,7 @@ static void fbtft_device_spi_delete(struct spi_master *master, unsigned cs)
 	dev = bus_find_device_by_name(&spi_bus_type, NULL, str);
 	if (dev) {
 		if (verbose)
-			pr_info(DRVNAME": Deleting %s\n", str);
+			pr_info("Deleting %s\n", str);
 		device_del(dev);
 	}
 }
@@ -1269,7 +1267,7 @@ static int fbtft_device_spi_device_register(struct spi_board_info *spi)
 
 	master = spi_busnum_to_master(spi->bus_num);
 	if (!master) {
-		pr_err(DRVNAME ":  spi_busnum_to_master(%d) returned NULL\n",
+		pr_err("spi_busnum_to_master(%d) returned NULL\n",
 								spi->bus_num);
 		return -EINVAL;
 	}
@@ -1278,7 +1276,7 @@ static int fbtft_device_spi_device_register(struct spi_board_info *spi)
 	spi_device = spi_new_device(master, spi);
 	put_device(&master->dev);
 	if (!spi_device) {
-		pr_err(DRVNAME ":    spi_new_device() returned NULL\n");
+		pr_err("spi_new_device() returned NULL\n");
 		return -EPERM;
 	}
 	return 0;
@@ -1301,11 +1299,11 @@ static int __init fbtft_device_init(void)
 	long val;
 	int ret = 0;
 
-	pr_debug("\n\n"DRVNAME": init\n");
+	pr_debug("init\n");
 
 	if (name == NULL) {
 #ifdef MODULE
-		pr_err(DRVNAME":  missing module parameter: 'name'\n");
+		pr_err("missing module parameter: 'name'\n");
 		return -EINVAL;
 #else
 		return 0;
@@ -1313,42 +1311,37 @@ static int __init fbtft_device_init(void)
 	}
 
 	if (init_num > FBTFT_MAX_INIT_SEQUENCE) {
-		pr_err(DRVNAME
-			":  init parameter: exceeded max array size: %d\n",
-			FBTFT_MAX_INIT_SEQUENCE);
+		pr_err("init parameter: exceeded max array size: %d\n",
+		       FBTFT_MAX_INIT_SEQUENCE);
 		return -EINVAL;
 	}
 
 	/* parse module parameter: gpios */
 	while ((p_gpio = strsep(&gpios, ","))) {
 		if (strchr(p_gpio, ':') == NULL) {
-			pr_err(DRVNAME
-				":  error: missing ':' in gpios parameter: %s\n",
-				p_gpio);
+			pr_err("error: missing ':' in gpios parameter: %s\n",
+			       p_gpio);
 			return -EINVAL;
 		}
 		p_num = p_gpio;
 		p_name = strsep(&p_num, ":");
 		if (p_name == NULL || p_num == NULL) {
-			pr_err(DRVNAME
-				":  something bad happened parsing gpios parameter: %s\n",
-				p_gpio);
+			pr_err("something bad happened parsing gpios parameter: %s\n",
+			       p_gpio);
 			return -EINVAL;
 		}
 		ret = kstrtol(p_num, 10, &val);
 		if (ret) {
-			pr_err(DRVNAME
-				":  could not parse number in gpios parameter: %s:%s\n",
-				p_name, p_num);
+			pr_err("could not parse number in gpios parameter: %s:%s\n",
+			       p_name, p_num);
 			return -EINVAL;
 		}
 		strncpy(fbtft_device_param_gpios[i].name, p_name,
 			FBTFT_GPIO_NAME_SIZE - 1);
 		fbtft_device_param_gpios[i++].gpio = (int) val;
 		if (i == MAX_GPIOS) {
-			pr_err(DRVNAME
-				":  gpios parameter: exceeded max array size: %d\n",
-				MAX_GPIOS);
+			pr_err("gpios parameter: exceeded max array size: %d\n",
+			       MAX_GPIOS);
 			return -EINVAL;
 		}
 	}
@@ -1361,7 +1354,7 @@ static int __init fbtft_device_init(void)
 	if (verbose > 2)
 		pr_p_devices(); /* print list of 'fb' platform devices */
 
-	pr_debug(DRVNAME":  name='%s', busnum=%d, cs=%d\n", name, busnum, cs);
+	pr_debug("name='%s', busnum=%d, cs=%d\n", name, busnum, cs);
 
 	if (rotate > 0 && rotate < 4) {
 		rotate = (4 - rotate) * 90;
@@ -1376,10 +1369,10 @@ static int __init fbtft_device_init(void)
 
 	/* name=list lists all supported displays */
 	if (strncmp(name, "list", FBTFT_GPIO_NAME_SIZE) == 0) {
-		pr_info(DRVNAME":  Supported displays:\n");
+		pr_info("Supported displays:\n");
 
 		for (i = 0; i < ARRAY_SIZE(displays); i++)
-			pr_info(DRVNAME":      %s\n", displays[i].name);
+			pr_info("%s\n", displays[i].name);
 		return -ECANCELED;
 	}
 
@@ -1410,7 +1403,7 @@ static int __init fbtft_device_init(void)
 				p_device = displays[i].pdev;
 				pdata = p_device->dev.platform_data;
 			} else {
-				pr_err(DRVNAME": broken displays array\n");
+				pr_err("broken displays array\n");
 				return -EINVAL;
 			}
 
@@ -1442,16 +1435,14 @@ static int __init fbtft_device_init(void)
 			if (displays[i].spi) {
 				ret = fbtft_device_spi_device_register(spi);
 				if (ret) {
-					pr_err(DRVNAME
-						": failed to register SPI device\n");
+					pr_err("failed to register SPI device\n");
 					return ret;
 				}
 			} else {
 				ret = platform_device_register(p_device);
 				if (ret < 0) {
-					pr_err(DRVNAME
-						":    platform_device_register() returned %d\n",
-						ret);
+					pr_err("platform_device_register() returned %d\n",
+					       ret);
 					return ret;
 				}
 			}
@@ -1461,22 +1452,22 @@ static int __init fbtft_device_init(void)
 	}
 
 	if (!found) {
-		pr_err(DRVNAME":  display not supported: '%s'\n", name);
+		pr_err("display not supported: '%s'\n", name);
 		return -EINVAL;
 	}
 
 	if (verbose && pdata && pdata->gpios) {
 		gpio = pdata->gpios;
-		pr_info(DRVNAME":  GPIOS used by '%s':\n", name);
+		pr_info("GPIOS used by '%s':\n", name);
 		found = false;
 		while (verbose && gpio->name[0]) {
-			pr_info(DRVNAME":    '%s' = GPIO%d\n",
+			pr_info("'%s' = GPIO%d\n",
 				gpio->name, gpio->gpio);
 			gpio++;
 			found = true;
 		}
 		if (!found)
-			pr_info(DRVNAME":    (none)\n");
+			pr_info("(none)\n");
 	}
 
 	if (spi_device && (verbose > 1))
@@ -1489,7 +1480,7 @@ static int __init fbtft_device_init(void)
 
 static void __exit fbtft_device_exit(void)
 {
-	pr_debug(DRVNAME" - exit\n");
+	pr_debug("exit\n");
 
 	if (spi_device) {
 		device_del(&spi_device->dev);
-- 
1.9.1


  parent reply	other threads:[~2015-09-05 13:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-05 13:43 [PATCH 1/3] staging: fbtft: use strncpy instead of strcpy Sudip Mukherjee
2015-09-05 13:43 ` [PATCH 2/3] staging: fbtft: do not use magic numbers Sudip Mukherjee
2015-09-05 13:43 ` Sudip Mukherjee [this message]
2015-09-09 18:35   ` [PATCH 3/3] staging: fbtft: use pr_fmt Greg Kroah-Hartman
2015-09-09 21:20     ` Noralf Trønnes
2015-09-10  4:54       ` Sudip Mukherjee
2015-09-10 16:45         ` Noralf Trønnes
2015-09-11 10:38           ` Sudip Mukherjee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441460625-19026-3-git-send-email-sudipm.mukherjee@gmail.com \
    --to=sudipm.mukherjee@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=noralf@tronnes.org \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®