From: Eric Anholt <eric@anholt.net>
To: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stephen Warren <swarren@wwwdotorg.org>,
Lee Jones <lee@kernel.org>, Stephen Boyd <sboyd@codeaurora.org>,
Mike Turquette <mturquette@linaro.org>,
devicetree@vger.kernel.org, Eric Anholt <eric@anholt.net>
Subject: [PATCH 1/4] clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
Date: Sun, 6 Sep 2015 10:57:40 -0700 [thread overview]
Message-ID: <1441562263-19888-2-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1441562263-19888-1-git-send-email-eric@anholt.net>
clk-bcm2835.c predates the drivers under bcm/, but all the new BCM
drivers are going in there so let's follow them.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/clk/Makefile | 1 -
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-bcm2835.c | 60 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/clk-bcm2835.c | 60 -------------------------------------------
4 files changed, 61 insertions(+), 61 deletions(-)
create mode 100644 drivers/clk/bcm/clk-bcm2835.c
delete mode 100644 drivers/clk/clk-bcm2835.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c4cf075..1bdbe9b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -19,7 +19,6 @@ endif
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
-obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 8a7a477..ee2349b 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
new file mode 100644
index 0000000..6b950ca
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+#include <linux/of.h>
+
+/*
+ * These are fixed clocks. They're probably not all root clocks and it may
+ * be possible to turn them on and off but until this is mapped out better
+ * it's the only way they can be used.
+ */
+void __init bcm2835_init_clocks(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT,
+ 250000000);
+ if (IS_ERR(clk))
+ pr_err("sys_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
+ 126000000);
+ if (IS_ERR(clk))
+ pr_err("apb_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
+ 3000000);
+ if (IS_ERR(clk))
+ pr_err("uart0_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20201000.uart");
+ if (ret)
+ pr_err("uart0_pclk alias not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
+ 125000000);
+ if (IS_ERR(clk))
+ pr_err("uart1_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20215000.uart");
+ if (ret)
+ pr_err("uart1_pclk alias not registered\n");
+}
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
deleted file mode 100644
index 6b950ca..0000000
--- a/drivers/clk/clk-bcm2835.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/clk/bcm2835.h>
-#include <linux/of.h>
-
-/*
- * These are fixed clocks. They're probably not all root clocks and it may
- * be possible to turn them on and off but until this is mapped out better
- * it's the only way they can be used.
- */
-void __init bcm2835_init_clocks(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT,
- 250000000);
- if (IS_ERR(clk))
- pr_err("sys_pclk not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
- 126000000);
- if (IS_ERR(clk))
- pr_err("apb_pclk not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
- 3000000);
- if (IS_ERR(clk))
- pr_err("uart0_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20201000.uart");
- if (ret)
- pr_err("uart0_pclk alias not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
- 125000000);
- if (IS_ERR(clk))
- pr_err("uart1_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20215000.uart");
- if (ret)
- pr_err("uart1_pclk alias not registered\n");
-}
--
2.1.4
next prev parent reply other threads:[~2015-09-06 17:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-06 17:57 Raspberry Pi native clock driver Eric Anholt
2015-09-06 17:57 ` Eric Anholt [this message]
2015-09-07 6:48 ` [PATCH 1/4] clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers Lee Jones
2015-09-08 19:22 ` Stephen Boyd
2015-10-01 14:43 ` Lee Jones
2015-09-06 17:57 ` [PATCH 2/4] clk: bcm2835: Add binding docs for the new platform clock driver Eric Anholt
2015-09-06 17:57 ` [PATCH 3/4] clk: bcm2835: Add support for programming the audio domain clocks Eric Anholt
2015-09-10 21:35 ` Eric Anholt
2015-09-06 17:57 ` [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441562263-19888-2-git-send-email-eric@anholt.net \
--to=eric@anholt.net \
--cc=devicetree@vger.kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mturquette@linaro.org \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®