From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <sameo@linux.intel.com>, <linux-kernel@vger.kernel.org>,
<patches@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: wm8998: Fixup register defaults/readables
Date: Wed, 9 Sep 2015 09:39:30 +0100 [thread overview]
Message-ID: <1441787970-30438-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
Remove defaults for a bunch of volatile registers and remove
ARIZONA_CTRL_IF_SPI_CFG_1 from the readable list since it doesn't exist
on wm8998 which is I2C only.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8998-tables.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/wm8998-tables.c b/drivers/mfd/wm8998-tables.c
index e6de3cd..08fc520 100644
--- a/drivers/mfd/wm8998-tables.c
+++ b/drivers/mfd/wm8998-tables.c
@@ -199,8 +199,6 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
{ 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
{ 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
- { 0x0000006E, 0x01FF }, /* R110 - Trigger Sequence Select 32 */
- { 0x0000006F, 0x01FF }, /* R111 - Trigger Sequence Select 33 */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
{ 0x00000092, 0x0000 }, /* R146 - Haptics phase 1 intensity */
@@ -270,16 +268,13 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
{ 0x00000293, 0x0080 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0000 }, /* R667 - Headphone Detect 1 */
- { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
{ 0x000002A2, 0x0000 }, /* R674 - Micd Clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
- { 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */
{ 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */
{ 0x000002A7, 0x2C37 }, /* R679 - Mic Detect Level 2 */
{ 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
{ 0x000002A9, 0x030A }, /* R681 - Mic Detect Level 4 */
- { 0x000002AB, 0x0000 }, /* R683 - Mic Detect 4 */
{ 0x000002CB, 0x0000 }, /* R715 - Isolation control */
{ 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */
{ 0x00000300, 0x0000 }, /* R768 - Input Enables */
@@ -707,13 +702,11 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000D1A, 0xFFFF }, /* R3354 - IRQ2 Status 3 Mask */
{ 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */
{ 0x00000D1C, 0xFEFF }, /* R3356 - IRQ2 Status 5 Mask */
- { 0x00000D1D, 0xFFFF }, /* R3357 - IRQ2 Status 6 Mask */
{ 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */
{ 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */
{ 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */
{ 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */
{ 0x00000E00, 0x0000 }, /* R3584 - FX_Ctrl1 */
- { 0x00000E01, 0x0000 }, /* R3585 - FX_Ctrl2 */
{ 0x00000E10, 0x6318 }, /* R3600 - EQ1_1 */
{ 0x00000E11, 0x6300 }, /* R3601 - EQ1_2 */
{ 0x00000E12, 0x0FC8 }, /* R3602 - EQ1_3 */
@@ -833,7 +826,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
switch (reg) {
case ARIZONA_SOFTWARE_RESET:
case ARIZONA_DEVICE_REVISION:
- case ARIZONA_CTRL_IF_SPI_CFG_1:
case ARIZONA_CTRL_IF_I2C1_CFG_1:
case ARIZONA_CTRL_IF_I2C1_CFG_2:
case ARIZONA_WRITE_SEQUENCER_CTRL_0:
--
1.7.2.5
next reply other threads:[~2015-09-09 9:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-09 8:39 Charles Keepax [this message]
2015-09-20 4:19 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441787970-30438-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome