From: Waiman Long <Waiman.Long@hpe.com>
To: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
Scott J Norton <scott.norton@hp.com>,
Douglas Hatch <doug.hatch@hp.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Waiman Long <Waiman.Long@hpe.com>
Subject: [PATCH v6 0/6] locking/qspinlock: Enhance pvqspinlock performance
Date: Fri, 11 Sep 2015 14:37:32 -0400 [thread overview]
Message-ID: <1441996658-62854-1-git-send-email-Waiman.Long@hpe.com> (raw)
v5->v6:
- Added a new patch 1 to relax the cmpxchg and xchg operations in
the native code path to reduce performance overhead on non-x86
architectures.
- Updated the unconditional PV kick patch as suggested by PeterZ.
- Added a new patch to allow one lock stealing attempt at slowpath
entry point to reduce performance penalty due to lock waiter
preemption.
- Removed the pending bit and kick-ahead patches as they didn't show
any noticeable performance improvement on top of the lock stealing
patch.
- Simplified the adaptive spinning patch as the lock stealing patch
allows more aggressive pv_wait() without much performance penalty
in non-overcommitted VMs.
v4->v5:
- Rebased the patch to the latest tip tree.
- Corrected the comments and commit log for patch 1.
- Removed the v4 patch 5 as PV kick deferment is no longer needed with
the new tip tree.
- Simplified the adaptive spinning patch (patch 6) & improve its
performance a bit further.
- Re-ran the benchmark test with the new patch.
v3->v4:
- Patch 1: add comment about possible racing condition in PV unlock.
- Patch 2: simplified the pv_pending_lock() function as suggested by
Davidlohr.
- Move PV unlock optimization patch forward to patch 4 & rerun
performance test.
v2->v3:
- Moved deferred kicking enablement patch forward & move back
the kick-ahead patch to make the effect of kick-ahead more visible.
- Reworked patch 6 to make it more readable.
- Reverted back to use state as a tri-state variable instead of
adding an additional bistate variable.
- Added performance data for different values of PV_KICK_AHEAD_MAX.
- Add a new patch to optimize PV unlock code path performance.
v1->v2:
- Take out the queued unfair lock patches
- Add a patch to simplify the PV unlock code
- Move pending bit and statistics collection patches to the front
- Keep vCPU kicking in pv_kick_node(), but defer it to unlock time
when appropriate.
- Change the wait-early patch to use adaptive spinning to better
balance the difference effect on normal and over-committed guests.
- Add patch-to-patch performance changes in the patch commit logs.
This patchset tries to improve the performance of both regular and
over-commmitted VM guests. The adaptive spinning patch was inspired
by the "Do Virtual Machines Really Scale?" blog from Sanidhya Kashyap.
Patch 1 relaxes the memory order restriction of atomic operations by
using less restrictive _acquire and _release variants of cmpxchg()
and xchg(). This will reduce performance overhead when ported to other
non-x86 architectures.
Patch 2 simplifies the unlock code by removing the unnecessary
state check.
Patch 2 adds pending bit support to pvqspinlock improving performance
at light load.
Patch 3 optimizes the PV unlock code path performance for x86-64
architecture.
Patch 4 allows the collection of various count data that are useful
to see what is happening in the system. They do add a bit of overhead
when enabled slowing performance a tiny bit.
Patch 5 allows one lock stealing attempt at slowpath entry. This causes
a pretty big performance improvement for over-committed VM guests.
Patch 6 enables adaptive spinning in the queue nodes. This patch
leads to further performance improvement in over-committed guest,
though it is not as big as the previous patch.
Waiman Long (6):
locking/qspinlock: relaxes cmpxchg & xchg ops in native code
locking/pvqspinlock: Unconditional PV kick with _Q_SLOW_VAL
locking/pvqspinlock, x86: Optimize PV unlock code path
locking/pvqspinlock: Collect slowpath lock statistics
locking/pvqspinlock: Allow 1 lock stealing attempt
locking/pvqspinlock: Queue node adaptive spinning
arch/x86/Kconfig | 7 +
arch/x86/include/asm/qspinlock.h | 2 +-
arch/x86/include/asm/qspinlock_paravirt.h | 59 +++++
include/asm-generic/qspinlock.h | 6 +-
kernel/locking/qspinlock.c | 45 +++--
kernel/locking/qspinlock_paravirt.h | 378 +++++++++++++++++++++++++----
6 files changed, 431 insertions(+), 66 deletions(-)
next reply other threads:[~2015-09-11 18:37 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 18:37 Waiman Long [this message]
2015-09-11 18:37 ` [PATCH v6 1/6] locking/qspinlock: relaxes cmpxchg & xchg ops in native code Waiman Long
2015-09-11 22:27 ` Davidlohr Bueso
2015-09-14 12:06 ` Peter Zijlstra
2015-09-14 18:40 ` Waiman Long
2015-09-14 15:16 ` Waiman Long
2015-09-11 18:37 ` [PATCH v6 2/6] locking/pvqspinlock: Unconditional PV kick with _Q_SLOW_VAL Waiman Long
2015-09-18 8:50 ` [tip:locking/core] locking/pvqspinlock: Kick the PV CPU unconditionally when _Q_SLOW_VAL tip-bot for Waiman Long
2015-09-11 18:37 ` [PATCH v6 3/6] locking/pvqspinlock, x86: Optimize PV unlock code path Waiman Long
2015-09-11 18:37 ` [PATCH v6 4/6] locking/pvqspinlock: Collect slowpath lock statistics Waiman Long
2015-09-11 23:13 ` Davidlohr Bueso
2015-09-14 15:25 ` Waiman Long
2015-09-14 21:41 ` Davidlohr Bueso
2015-09-15 3:47 ` Waiman Long
2015-09-11 18:37 ` [PATCH v6 5/6] locking/pvqspinlock: Allow 1 lock stealing attempt Waiman Long
2015-09-14 13:57 ` Peter Zijlstra
2015-09-14 19:02 ` Waiman Long
2015-09-14 14:00 ` Peter Zijlstra
2015-09-14 19:15 ` Waiman Long
2015-09-14 19:38 ` Waiman Long
2015-09-15 8:24 ` Peter Zijlstra
2015-09-15 15:29 ` Waiman Long
2015-09-16 15:01 ` Peter Zijlstra
2015-09-17 15:08 ` Waiman Long
2015-09-14 14:04 ` Peter Zijlstra
2015-09-14 19:19 ` Waiman Long
2015-09-11 18:37 ` [PATCH v6 6/6] locking/pvqspinlock: Queue node adaptive spinning Waiman Long
2015-09-14 14:10 ` Peter Zijlstra
2015-09-14 19:37 ` Waiman Long
2015-09-15 8:38 ` Peter Zijlstra
2015-09-15 15:32 ` Waiman Long
2015-09-16 15:03 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441996658-62854-1-git-send-email-Waiman.Long@hpe.com \
--to=waiman.long@hpe.com \
--cc=dave@stgolabs.net \
--cc=doug.hatch@hp.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=scott.norton@hp.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®