From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753952AbbIRNTD (ORCPT ); Fri, 18 Sep 2015 09:19:03 -0400 Received: from mail-wi0-f175.google.com ([209.85.212.175]:36938 "EHLO mail-wi0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753068AbbIRNS7 (ORCPT ); Fri, 18 Sep 2015 09:18:59 -0400 From: "Ivan T. Ivanov" To: Andy Gross Cc: Srinivas Kandagatla , Stanimir Varbanov , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [PATCH v2 1/2] arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations Date: Fri, 18 Sep 2015 16:18:53 +0300 Message-Id: <1442582334-29387-2-git-send-email-ivan.ivanov@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1442582334-29387-1-git-send-email-ivan.ivanov@linaro.org> References: <1442582334-29387-1-git-send-email-ivan.ivanov@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add devicetree bindings for UART1 CTS_N and RTS_N pins. Signed-off-by: Ivan T. Ivanov --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 42941b977c48..f9b74bb14d31 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -16,10 +16,13 @@ blsp1_uart1_default: blsp1_uart1_default { pinmux { function = "blsp_uart1"; - pins = "gpio0", "gpio1"; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <16>; bias-disable; }; @@ -28,10 +31,12 @@ blsp1_uart1_sleep: blsp1_uart1_sleep { pinmux { function = "gpio"; - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <2>; bias-pull-down; }; -- 1.9.1