From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933073AbbIUWOf (ORCPT ); Mon, 21 Sep 2015 18:14:35 -0400 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:53518 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932756AbbIUWMd (ORCPT ); Mon, 21 Sep 2015 18:12:33 -0400 X-IronPort-AV: E=Sophos;i="5.17,569,1437462000"; d="scan'208";a="75521869" From: Ray Jui To: Florian Fainelli , Rob Herring , Arnd Bergmann CC: Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , , , , , "Ray Jui" Subject: [PATCH v3 0/9] Broadcom Cygnus device tree changes Date: Mon, 21 Sep 2015 15:12:41 -0700 Message-ID: <1442873570-20947-1-git-send-email-rjui@broadcom.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch series cleans up the Broadcom Cygnus device tree files and makes it more consistent with the rest of Broadcom iProc device tree files. This patch series also enables various peripherals on Cygnus boards. They include: bcm11360_entphn: NAND bcm958300k: touchscreen bcm958305k: I2C, PCIe, NAND, touchscreen Code is based on v4.3-rc1 and is available on GITHUB: https://github.com/Broadcom/cygnus-linux/tree/cygnus-dt-v3 Changes from V2: - Drop PCIe device node change that removes the I/O resource - Set up appropriate address range for the 'core' bus - Rename the 'soc' bus node to 'axi' - Remove incorrect 3rd compatible string 'brcm,brcmnand' in the NAND node Chages from V1: - Break the major clean up change into separate patches Ray Jui (9): ARM: dts: consolidate aliases for Cygnus dt files ARM: dts: Use label for device nodes in Cygnus dts ARM: dts: Put Cygnus core components under core bus ARM: dts: Move all Cygnus peripherals into axi bus ARM: dts: Reorder Cygnus peripherals ARM: dts: Enable various peripherals on bcm958305k ARM: dts: Enable NAND support on bcm911360_entphn ARM: dts: enable touchscreen support on Cygnus ARM: dts: fix Cygnus nand device node arch/arm/boot/dts/bcm-cygnus.dtsi | 338 +++++++++++++++++---------------- arch/arm/boot/dts/bcm911360_entphn.dts | 28 ++- arch/arm/boot/dts/bcm911360k.dts | 10 +- arch/arm/boot/dts/bcm958300k.dts | 45 ++--- arch/arm/boot/dts/bcm958305k.dts | 41 +++- arch/arm/boot/dts/bcm9hmidc.dtsi | 42 ++++ 6 files changed, 300 insertions(+), 204 deletions(-) create mode 100644 arch/arm/boot/dts/bcm9hmidc.dtsi -- 1.9.1