From: Yury Norov <ynorov@caviumnetworks.com>
To: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <catalin.marinas@arm.com>,
<arnd@arndb.de>, <agraf@suse.de>, <bamvor.zhangjian@huawei.com>
Cc: <yury.norov@gmail.com>, <philipp.tomsich@theobroma-systems.com>,
<apinski@cavium.com>, <christoph.muellner@theobroma-systems.com>,
<klimov.linux@gmail.com>, Yury Norov <ynorov@caviumnetworks.com>
Subject: [PATCH v5 19/23] arm64:ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it
Date: Wed, 30 Sep 2015 01:14:16 +0300 [thread overview]
Message-ID: <1443564860-31208-20-git-send-email-ynorov@caviumnetworks.com> (raw)
In-Reply-To: <1443564860-31208-1-git-send-email-ynorov@caviumnetworks.com>
From: Andrew Pinski <apinski@cavium.com>
Add a separate syscall-table for ILP32, which dispatches either to native
LP64 system call implementation or to compat-syscalls, as appropriate.
This revision of the patch now addresses Catalin's comment regarding the
duplicate reading of the task-flags in the el0_svc-handler and simply
relies on the flags having been read by the kernel_entry macro.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
create mode 100644 arch/arm64/kernel/sys_ilp32.c
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 759c433..31eabf1 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -13,6 +13,10 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#ifdef CONFIG_ARM64_ILP32
+#define __ARCH_WANT_COMPAT_SYS_PREADV64
+#define __ARCH_WANT_COMPAT_SYS_PWRITEV64
+#endif
#ifdef CONFIG_AARCH32_EL0
#define __ARCH_WANT_COMPAT_SYS_GETDENTS64
#define __ARCH_WANT_COMPAT_STAT64
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index ff60c2f..a1cbb11 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -24,6 +24,7 @@ arm64-obj-$(CONFIG_AARCH32_EL0) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o \
../../arm/kernel/opcodes.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
+arm64-obj-$(CONFIG_ARM64_ILP32) += sys_ilp32.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 52be5c8..bcd921a 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -664,9 +664,13 @@ ENDPROC(ret_from_fork)
*/
.align 6
el0_svc:
- adrp stbl, sys_call_table // load syscall table pointer
uxtw scno, w8 // syscall number in w8
mov sc_nr, #__NR_syscalls
+#ifdef CONFIG_ARM64_ILP32
+ ldr x16, [tsk, #TI_FLAGS]
+ tbnz x16, #TIF_32BIT_AARCH64, el0_ilp32_svc // We are using ILP32
+#endif
+ adrp stbl, sys_call_table // load syscall table pointer
el0_svc_naked: // compat entry point
stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
enable_dbg_and_irq
@@ -686,6 +690,12 @@ ni_sys:
b ret_fast_syscall
ENDPROC(el0_svc)
+#ifdef CONFIG_ARM64_ILP32
+el0_ilp32_svc:
+ adrp stbl, sys_call_ilp32_table // load syscall table pointer
+ b el0_svc_naked
+#endif
+
/*
* This is the really slow path. We're going to be doing context
* switches, and waiting for our parent to respond.
diff --git a/arch/arm64/kernel/sys_ilp32.c b/arch/arm64/kernel/sys_ilp32.c
new file mode 100644
index 0000000..623191a
--- /dev/null
+++ b/arch/arm64/kernel/sys_ilp32.c
@@ -0,0 +1,178 @@
+/*
+ * AArch64- ILP32 specific system calls implementation
+ *
+ * Copyright (C) 2013 Cavium Inc.
+ * Author: Andrew Pinski <apinski@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/compat.h>
+
+/*
+ * Wrappers to pass the pt_regs argument.
+ */
+asmlinkage long sys_rt_sigreturn_wrapper(void);
+#define sys_rt_sigreturn sys_rt_sigreturn_wrapper
+
+/* Using Compat syscalls where necessary */
+#define sys_ioctl compat_sys_ioctl
+/* iovec */
+#define sys_readv compat_sys_readv
+#define sys_writev compat_sys_writev
+#define sys_preadv compat_sys_preadv64
+#define sys_pwritev compat_sys_pwritev64
+#define sys_vmsplice compat_sys_vmsplice
+/* robust_list_head */
+#define sys_set_robust_list compat_sys_set_robust_list
+#define sys_get_robust_list compat_sys_get_robust_list
+
+/* kexec_segment */
+#define sys_kexec_load compat_sys_kexec_load
+
+/* Ptrace has some structures which are different between ILP32 and LP64 */
+#define sys_ptrace compat_sys_ptrace
+
+/* struct msghdr */
+#define sys_recvfrom compat_sys_recvfrom
+#define sys_recvmmsg compat_sys_recvmmsg
+#define sys_sendmmsg compat_sys_sendmmsg
+#define sys_sendmsg compat_sys_sendmsg
+#define sys_recvmsg compat_sys_recvmsg
+
+#define sys_setsockopt compat_sys_setsockopt
+#define sys_getsockopt compat_sys_getsockopt
+
+/* Array of pointers */
+#define sys_execve compat_sys_execve
+#define sys_move_pages compat_sys_move_pages
+
+/* iovec */
+#define sys_process_vm_readv compat_sys_process_vm_readv
+#define sys_process_vm_writev compat_sys_process_vm_writev
+
+/* Pointer in struct */
+#define sys_mount compat_sys_mount
+
+/* NUMA */
+/* unsigned long bitmaps */
+#define sys_get_mempolicy compat_sys_get_mempolicy
+#define sys_set_mempolicy compat_sys_set_mempolicy
+#define sys_mbind compat_sys_mbind
+/* array of pointers */
+/* unsigned long bitmaps */
+#define sys_migrate_pages compat_sys_migrate_pages
+
+/* Scheduler */
+/* unsigned long bitmaps */
+#define sys_sched_setaffinity compat_sys_sched_setaffinity
+#define sys_sched_getaffinity compat_sys_sched_getaffinity
+
+/* iov usage */
+#define sys_keyctl compat_sys_keyctl
+
+/* aio */
+/* Pointer to Pointer */
+#define sys_io_setup compat_sys_io_setup
+/* Array of pointers */
+#define sys_io_submit compat_sys_io_submit
+
+/* We need to make sure the pointer gets copied correctly. */
+asmlinkage long ilp32_sys_mq_notify(mqd_t mqdes, const struct sigevent __user *u_notification)
+{
+ struct sigevent __user *p = NULL;
+ if (u_notification) {
+ struct sigevent n;
+ p = compat_alloc_user_space(sizeof(*p));
+ if (copy_from_user(&n, u_notification, sizeof(*p)))
+ return -EFAULT;
+ if (n.sigev_notify == SIGEV_THREAD)
+ n.sigev_value.sival_ptr = compat_ptr((uintptr_t)n.sigev_value.sival_ptr);
+ if (copy_to_user(p, &n, sizeof(*p)))
+ return -EFAULT;
+ }
+ return sys_mq_notify(mqdes, p);
+}
+
+/* sigevent contains sigval_t which is now 64bit always
+ but need special handling due to padding for SIGEV_THREAD. */
+#define sys_mq_notify ilp32_sys_mq_notify
+
+
+/* sigaltstack needs some special handling as the
+ padding for stack_t might not be non-zero. */
+long ilp32_sys_sigaltstack(const stack_t __user *uss_ptr,
+ stack_t __user *uoss_ptr)
+{
+ stack_t uss, uoss;
+ int ret;
+ mm_segment_t seg;
+
+ if (uss_ptr) {
+ if (!access_ok(VERIFY_READ, uss_ptr, sizeof(*uss_ptr)))
+ return -EFAULT;
+ if (__get_user(uss.ss_sp, &uss_ptr->ss_sp) |
+ __get_user(uss.ss_flags, &uss_ptr->ss_flags) |
+ __get_user(uss.ss_size, &uss_ptr->ss_size))
+ return -EFAULT;
+ /* Zero extend the sp address and the size. */
+ uss.ss_sp = (void *)(uintptr_t)(unsigned int)(uintptr_t)uss.ss_sp;
+ uss.ss_size = (size_t)(unsigned int)uss.ss_size;
+ }
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+ /* Note we need to use uoss as we have changed the segment to the
+ kernel one so passing an user one around is wrong. */
+ ret = sys_sigaltstack((stack_t __force __user *) (uss_ptr ? &uss : NULL),
+ (stack_t __force __user *) &uoss);
+ set_fs(seg);
+ if (ret >= 0 && uoss_ptr) {
+ if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_t)) ||
+ __put_user(uoss.ss_sp, &uoss_ptr->ss_sp) ||
+ __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
+ __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+ ret = -EFAULT;
+ }
+ return ret;
+}
+
+/* sigaltstack needs some special handling as the padding
+ for stack_t might not be non-zero. */
+#define sys_sigaltstack ilp32_sys_sigaltstack
+
+
+#include <asm/syscall.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym) [nr] = sym,
+
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, off_t off);
+
+/*
+ * The sys_call_ilp32_table array must be 4K aligned to be accessible from
+ * kernel/entry.S.
+ */
+void *sys_call_ilp32_table[__NR_syscalls] __aligned(4096) = {
+ [0 ... __NR_syscalls - 1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
--
2.1.4
next prev parent reply other threads:[~2015-09-29 22:21 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-29 22:13 [PATCH v5 00/23] ILP32 for ARM64 Yury Norov
2015-09-29 22:13 ` [PATCH v5 01/23] arm64:ilp32: add documentation on the ILP32 ABI " Yury Norov
2015-09-29 22:13 ` [PATCH v5 02/23] arm64: ensure the kernel is compiled for LP64 Yury Norov
2015-09-29 22:14 ` [PATCH v5 03/23] arm64: rename COMPAT to AARCH32_EL0 in Kconfig Yury Norov
2015-10-06 9:21 ` Andrey Konovalov
2015-09-29 22:14 ` [PATCH v5 04/23] arm64: change some CONFIG_COMPAT over to use CONFIG_AARCH32_EL0 instead Yury Norov
2015-09-30 3:36 ` kbuild test robot
2015-09-30 5:35 ` kbuild test robot
2015-10-06 9:21 ` Andrey Konovalov
2015-09-29 22:14 ` [PATCH v5 05/23] arm64:ilp32: expose 'kernel_long' as 'long long' for ILP32 Yury Norov
2015-09-29 22:14 ` [PATCH v5 06/23] arm64:uapi: set __BITS_PER_LONG correctly for ILP32 and LP64 Yury Norov
2015-09-29 22:14 ` [PATCH v5 07/23] arm64:ilp32: share signal structures between ILP32 and LP64 ABIs Yury Norov
2015-09-29 22:14 ` [PATCH v5 08/23] arm64:ilp32: use 64bit syscall-names for ILP32 when passing 64bit registers Yury Norov
2015-09-29 22:14 ` [PATCH v5 09/23] arm64:ilp32: use non-compat syscall names for ILP32 as for LP64 Yury Norov
2015-09-29 22:14 ` [PATCH v5 10/23] arm64: introduce is_a32_task and is_a32_thread (for AArch32 compat) Yury Norov
2015-09-30 3:48 ` kbuild test robot
2015-10-06 9:21 ` Andrey Konovalov
2015-10-07 16:13 ` Yury Norov
2015-09-29 22:14 ` [PATCH v5 11/23] arm64:ilp32: add is_ilp32_compat_{task,thread} and TIF_32BIT_AARCH64 Yury Norov
2015-09-29 22:14 ` [PATCH v5 12/23] arm64:ilp32: COMPAT_USE_64BIT_TIME is true for ILP32 tasks Yury Norov
2015-09-29 22:14 ` [PATCH v5 13/23] arm64:ilp32: share HWCAP between LP64 and ILP32 Yury Norov
2015-09-29 22:14 ` [PATCH v5 14/23] arm64:ilp32 use the native LP64 'start_thread' for ILP32 threads Yury Norov
2015-09-29 22:14 ` [PATCH v5 15/23] arm64:ilp32: support core dump generation for ILP32 Yury Norov
2015-09-29 22:14 ` [PATCH v5 16/23] arm64: add support for starting ILP32 (ELFCLASS32) binaries Yury Norov
2015-09-29 22:14 ` [PATCH v5 17/23] arm64:ilp32: add vdso-ilp32 and use for signal return Yury Norov
2015-09-30 4:06 ` Nathan Lynch
2015-10-01 19:44 ` Yury Norov
2015-10-01 19:54 ` Dr. Philipp Tomsich
2015-09-29 22:14 ` [PATCH v5 18/23] ptrace: Allow compat to use the native siginfo Yury Norov
2015-09-29 22:14 ` Yury Norov [this message]
2015-09-29 22:14 ` [PATCH v5 20/23] arm64:ilp32: use the native siginfo instead of the compat siginfo Yury Norov
2015-09-29 22:14 ` [PATCH v5 21/23] arm64:ilp32: change COMPAT_ELF_PLATFORM to report a a subplatform for ILP32 Yury Norov
2015-09-29 22:14 ` [PATCH v5 22/23] aarch64: ilp32: msgrcv, msgsnd handlers Yury Norov
2015-09-29 22:14 ` [PATCH v5 23/23] arm64:ilp32: add ARM64_ILP32 to Kconfig Yury Norov
2015-09-30 10:19 ` [PATCH v5 00/23] ILP32 for ARM64 Catalin Marinas
2015-09-30 16:41 ` Mark Brown
2015-10-01 11:19 ` Catalin Marinas
2015-10-01 11:36 ` Mark Brown
2015-10-01 16:42 ` Andrey Konovalov
2015-10-01 19:33 ` Yury Norov
2015-10-01 19:15 ` Yury Norov
2015-10-01 21:28 ` Arnd Bergmann
2015-10-01 21:49 ` Pinski, Andrew
2015-10-02 9:37 ` Catalin Marinas
2015-10-03 2:18 ` Kapoor, Prasun
2015-10-05 15:58 ` Catalin Marinas
2015-10-05 21:00 ` Pinski, Andrew
2015-10-05 19:10 ` Yury Norov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443564860-31208-20-git-send-email-ynorov@caviumnetworks.com \
--to=ynorov@caviumnetworks.com \
--cc=agraf@suse.de \
--cc=apinski@cavium.com \
--cc=arnd@arndb.de \
--cc=bamvor.zhangjian@huawei.com \
--cc=catalin.marinas@arm.com \
--cc=christoph.muellner@theobroma-systems.com \
--cc=klimov.linux@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=philipp.tomsich@theobroma-systems.com \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®