From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 03/16] ARM: at91/dt: use syscon for PMC
Date: Wed, 30 Sep 2015 18:10:56 +0200 [thread overview]
Message-ID: <1443629469-15086-4-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1443629469-15086-1-git-send-email-alexandre.belloni@free-electrons.com>
The PMC is not only used to drive the clocks but also has some registers
related to other functions. One of those is for example the USB gadget
bias.
Using a syscon allows to properly separate those functions.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 60edd8baebb8..39eb1e3fc6b8 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index be9c027ddd97..d4884dd1c243 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -100,7 +100,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9260-pmc";
+ compatible = "atmel,at91sam9260-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index ce1e3e94a40c..5e09de4eb9cd 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -568,7 +568,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index f1f5fa3a9e6e..93446420af25 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18b8b9e29704..af8b708ac312 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -114,7 +114,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 32bc9a189db0..95569a87b6c9 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9n12-pmc";
+ compatible = "atmel,at91sam9n12-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index a0b90aedd3b8..6d829db4e887 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -814,7 +814,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 747d8f070a5c..0a0ea6bce1b9 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -105,7 +105,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9x5-pmc";
+ compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 034cd48ae28b..780c8afc7600 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -286,7 +286,7 @@
};
pmc: pmc@f0014000 {
- compatible = "atmel,sama5d2-pmc";
+ compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7fa276515f11..fa054b28c2c3 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -906,7 +906,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 8d1de29e8da1..3ab2c83ecc8b 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -386,7 +386,7 @@
};
pmc: pmc@f0018000 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
--
2.1.4
next prev parent reply other threads:[~2015-09-30 16:16 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 16:10 [PATCH 00/16] ARM: at91: PMC driver rework Alexandre Belloni
2015-09-30 16:10 ` [PATCH 01/16] clk: at91: utmi: use pmc_read when the at91_pmc is available Alexandre Belloni
2015-09-30 16:10 ` [PATCH 02/16] clk: at91: system: don't try to free_irq when there is no IRQ Alexandre Belloni
2015-09-30 16:10 ` Alexandre Belloni [this message]
2015-09-30 16:10 ` [PATCH 04/16] clk: at91: make use of syscon to share PMC registers in several drivers Alexandre Belloni
2015-10-01 17:49 ` Stephen Boyd
2015-09-30 16:10 ` [PATCH 05/16] clk: at91: make use of syscon/regmap internally Alexandre Belloni
2015-09-30 16:10 ` [PATCH 06/16] clk: at91: clk-main: factorize irq handling Alexandre Belloni
2015-10-01 8:34 ` Boris Brezillon
2015-09-30 16:11 ` [PATCH 07/16] clk: at91: make IRQ optional and register them later Alexandre Belloni
2015-09-30 16:11 ` [PATCH 08/16] clk: at91: only enable available IRQs Alexandre Belloni
2015-10-01 8:24 ` Ludovic Desroches
2015-09-30 16:11 ` [PATCH 09/16] clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe Alexandre Belloni
2015-09-30 16:11 ` [PATCH 10/16] clk: at91: pmc: move pmc structures to C file Alexandre Belloni
2015-09-30 16:11 ` [PATCH 11/16] ARM: at91: pm: simply call at91_pm_init Alexandre Belloni
2015-09-30 16:11 ` [PATCH 12/16] ARM: at91: pm: find and remap the pmc Alexandre Belloni
2015-09-30 16:11 ` [PATCH 13/16] ARM: at91: pm: move idle functions to pm.c Alexandre Belloni
2015-09-30 16:11 ` [PATCH 14/16] ARM: at91: remove useless includes and function prototypes Alexandre Belloni
2015-09-30 16:11 ` [PATCH 15/16] usb: gadget: atmel: access the PMC using regmap Alexandre Belloni
2015-09-30 16:31 ` Felipe Balbi
2015-09-30 16:39 ` Nicolas Ferre
2015-09-30 16:43 ` Felipe Balbi
2015-09-30 16:59 ` Alexandre Belloni
2015-09-30 16:59 ` Alexandre Belloni
2015-09-30 16:11 ` [PATCH 16/16] clk: at91: pmc: drop at91_pmc_base Alexandre Belloni
2015-09-30 16:17 ` [PATCH 00/16] ARM: at91: PMC driver rework Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443629469-15086-4-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®