mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Emilio Lopez <emilio@elopez.com.ar>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	alsa-devel@alsa-project.org,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH] ASoC: sun4i-codec: Rework and fix headphone routing
Date: Sun,  4 Oct 2015 15:38:16 +0200	[thread overview]
Message-ID: <1443965896-6205-1-git-send-email-maxime.ripard@free-electrons.com> (raw)

Most of the boards have their headphone jack directly connected to the
matching pins of the SoCs. Since most of the time we will have the same
routing path, it makes sense to put that in the driver, and only have a
property describing whether that route is enabled or not.

It also fixes the following warning messages that were seen so far:
sun4i-codec 1c22c00.codec: ASoC: no sink widget found for Headphone Jack
sun4i-codec 1c22c00.codec: ASoC: Failed to add route HP Left -> direct -> Headphone Jack
sun4i-codec 1c22c00.codec: ASoC: no sink widget found for Headphone Jack
sun4i-codec 1c22c00.codec: ASoC: Failed to add route HP Right -> direct -> Headphone Jack

Reported-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 .../devicetree/bindings/sound/sun4i-codec.txt      |  9 ++++----
 sound/soc/sunxi/sun4i-codec.c                      | 25 +++++++++++++++++-----
 2 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 680144b74ae9..470823845698 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -13,10 +13,10 @@ Required properties:
 - clock-names: should contain followings:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
-- routing : A list of the connections between audio components.  Each
-  entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source.
 
+Optional Properties:
+- allwinner,hp-jack-attached: Indicates that the headphone jack on the
+                              board is directly routed to the SoC pins
 
 Example:
 codec: codec@01c22c00 {
@@ -28,6 +28,5 @@ codec: codec@01c22c00 {
 	clock-names = "apb", "codec";
 	dmas = <&dma 0 19>, <&dma 0 19>;
 	dma-names = "rx", "tx";
-	routing = "Headphone Jack", "HP Right",
-		  "Headphone Jack", "HP Left";
+	allwinner,hp-jack-attached;
 };
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 47780552dcd0..e86b8fcede5a 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -568,10 +568,18 @@ static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev,
 	return link;
 };
 
+static const struct snd_soc_dapm_widget sun4i_codec_sink_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route sun4i_codec_sink_routes[] = {
+	{ "Headphone Jack", NULL, "HP Right" },
+	{ "Headphone Jack", NULL, "HP Left" },
+};
+
 static struct snd_soc_card *sun4i_codec_create_card(struct device *dev)
 {
 	struct snd_soc_card *card;
-	int ret;
 
 	card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
 	if (!card)
@@ -584,10 +592,17 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev)
 	card->dev		= dev;
 	card->name		= "sun4i-codec";
 
-	ret = snd_soc_of_parse_audio_routing(card, "routing");
-	if (ret) {
-		dev_err(dev, "Failed to create our audio routing\n");
-		return NULL;
+	/*
+	 * FIXME: This will probably require more logic once we will
+	 *        support other sinks (for capture for example), or
+	 *        encounter more complicated setups where the
+	 *        headphone jack is not directly connected to the SoC.
+	 */
+	if (of_property_read_bool(dev->of_node, "allwinner,hp-jack-attached")) {
+		card->dapm_widgets	= sun4i_codec_sink_widgets;
+		card->num_dapm_widgets	= ARRAY_SIZE(sun4i_codec_sink_widgets);
+		card->dapm_routes	= sun4i_codec_sink_routes;
+		card->num_dapm_routes	= ARRAY_SIZE(sun4i_codec_sink_routes);
 	}
 
 	return card;
-- 
2.5.3


             reply	other threads:[~2015-10-04 13:38 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-04 13:38 Maxime Ripard [this message]
2015-10-05  9:44 ` Mark Brown
2015-10-05 10:25   ` Maxime Ripard
2015-10-05 14:21     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443965896-6205-1-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®