From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751724AbbJENEp (ORCPT ); Mon, 5 Oct 2015 09:04:45 -0400 Received: from mail-wi0-f174.google.com ([209.85.212.174]:33180 "EHLO mail-wi0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751210AbbJENEn (ORCPT ); Mon, 5 Oct 2015 09:04:43 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: jassisinghbrar@gmail.com, devicetree@vger.kernel.org Subject: [PATCH v4 0/5] Mailbox: Provide support STi based platforms Date: Mon, 5 Oct 2015 14:02:15 +0100 Message-Id: <1444050140-24733-1-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Jassi, This should be it. Exciting times! ST's platforms currently support a maximum of 5 Mailboxes, one for each of the supported co-processors situated on the platform. Each Mailbox is divided up into 4 instances which consist of 32 channels. Messages are passed between the application and co-processors using shared memory areas. Also included in the set is an example Client which should be generic enough to use as a testing environment for all Mailbox IPs which use shared memory or the API to pass messages. With small changes, it should also be able to test more extravagant implementations. v3 -> v4: - More protection in MBOX_BASE() MACRO - Remove unused tx-only marker v2 => v3: - Controller - Shared (DT <=> Device Driver) defines removed - Return actual error codes instead of NULL in xlate() - Not passing 'direction' configuration via DT anymore - Removed all accompanying configuration checking code - Test F/W - Allow Rx-only and Tx-only controllers to be tested - Cater for controllers requiring pre-Tx 'signal' to be sent - Supply 'wr-' message debugfs file - When written to, will Tx message through Mailbox Framework - When read from, will print out a hexdump of Rx'ed message v1 => v2: - New MACRO() to obtain base address for a given instance - Move locking into the structure it protects - Stop checking for 'ready' state when sending data - Don't clear channel data (that belongs to the API) - #define register offsets instead of providing via pdata - Register driver with module_platform_driver() Lee Jones (5): mailbox: dt: Supply bindings for ST's Mailbox IP mailbox: Add support for ST's Mailbox IP ARM: STi: stih407-family: Add nodes for Mailbox mailbox: Add generic mechanism for testing Mailbox Controllers ARM: STi: DT: STiH407: Enable Mailbox testing facility .../devicetree/bindings/mailbox/sti-mailbox.txt | 52 +++ arch/arm/boot/dts/stih407-family.dtsi | 42 ++ drivers/mailbox/Kconfig | 14 + drivers/mailbox/Makefile | 4 + drivers/mailbox/mailbox-sti.c | 516 +++++++++++++++++++++ drivers/mailbox/mailbox-test.c | 361 ++++++++++++++ 6 files changed, 989 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/sti-mailbox.txt create mode 100644 drivers/mailbox/mailbox-sti.c create mode 100644 drivers/mailbox/mailbox-test.c -- 1.9.1