From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752835AbbJFJXK (ORCPT ); Tue, 6 Oct 2015 05:23:10 -0400 Received: from lists.s-osg.org ([54.187.51.154]:47452 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751382AbbJFJXI (ORCPT ); Tue, 6 Oct 2015 05:23:08 -0400 From: Javier Martinez Canillas To: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, Christoph Fritz , Tony Lindgren , Javier Martinez Canillas Subject: [PATCH] ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO Date: Tue, 6 Oct 2015 11:22:59 +0200 Message-Id: <1444123379-1590-1-git-send-email-javier@osg.samsung.com> X-Mailer: git-send-email 2.4.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The card detect GPIO is using IRQ_TYPE_LEVEL_LOW in the GPIO flag cells but this defined constant is meant to be used for a IRQ and not a GPIO. So instead use GPIO_ACTIVE_LOW that seems to be the original intention. Signed-off-by: Javier Martinez Canillas --- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 46f88f86a50b..57d7c93cc72b 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -284,7 +284,7 @@ }; &mmc1 { - cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; cd-inverted; vmmc-supply = <&vmmc1>; bus-width = <4>; -- 2.4.3