From: Axel Lin <axel.lin@ingics.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Denis Grigoryev <grigoryev@fastwel.ru>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT] regulator: tps6105x: Convert to use regmap helper functions
Date: Wed, 07 Oct 2015 08:47:17 +0800 [thread overview]
Message-ID: <1444178837.5561.1.camel@ingics.com> (raw)
Since commit 7e5071199355 ("mfd: tps6105x: Use i2c regmap to access
registers"), we can use regmap helper functions instead of open coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Grigoryev,
I don't have this h/w, can you help test this patch? Thanks.
This patch depends on commit 7e5071199355
"mfd: tps6105x: Use i2c regmap to access registers" which is currently
in mfd tree.
drivers/regulator/tps6105x-regulator.c | 95 +++++-----------------------------
1 file changed, 12 insertions(+), 83 deletions(-)
diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c
index ddc4f10..584ef3d 100644
--- a/drivers/regulator/tps6105x-regulator.c
+++ b/drivers/regulator/tps6105x-regulator.c
@@ -27,90 +27,12 @@ static const unsigned int tps6105x_voltages[] = {
5000000, /* There is an additional 5V */
};
-static int tps6105x_regulator_enable(struct regulator_dev *rdev)
-{
- struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
- int ret;
-
- /* Activate voltage mode */
- ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
- TPS6105X_REG0_MODE_MASK,
- TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int tps6105x_regulator_disable(struct regulator_dev *rdev)
-{
- struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
- int ret;
-
- /* Set into shutdown mode */
- ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
- TPS6105X_REG0_MODE_MASK,
- TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
-{
- struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
- unsigned int regval;
- int ret;
-
- ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val);
- if (ret)
- return ret;
- regval &= TPS6105X_REG0_MODE_MASK;
- regval >>= TPS6105X_REG0_MODE_SHIFT;
-
- if (regval == TPS6105X_REG0_MODE_VOLTAGE)
- return 1;
-
- return 0;
-}
-
-static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
- unsigned int regval;
- int ret;
-
- ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val);
- if (ret)
- return ret;
-
- regval &= TPS6105X_REG0_VOLTAGE_MASK;
- regval >>= TPS6105X_REG0_VOLTAGE_SHIFT;
- return (int) regval;
-}
-
-static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
- int ret;
-
- ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
- TPS6105X_REG0_VOLTAGE_MASK,
- selector << TPS6105X_REG0_VOLTAGE_SHIFT);
- if (ret)
- return ret;
-
- return 0;
-}
-
static struct regulator_ops tps6105x_regulator_ops = {
- .enable = tps6105x_regulator_enable,
- .disable = tps6105x_regulator_disable,
- .is_enabled = tps6105x_regulator_is_enabled,
- .get_voltage_sel = tps6105x_regulator_get_voltage_sel,
- .set_voltage_sel = tps6105x_regulator_set_voltage_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_table,
};
@@ -122,6 +44,12 @@ static const struct regulator_desc tps6105x_regulator_desc = {
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(tps6105x_voltages),
.volt_table = tps6105x_voltages,
+ .vsel_reg = TPS6105X_REG_0,
+ .vsel_mask = TPS6105X_REG0_VOLTAGE_MASK,
+ .enable_reg = TPS6105X_REG_0,
+ .enable_mask = TPS6105X_REG0_MODE_MASK,
+ .enable_val = TPS6105X_REG0_MODE_VOLTAGE <<
+ TPS6105X_REG0_MODE_SHIFT,
};
/*
@@ -144,6 +72,7 @@ static int tps6105x_regulator_probe(struct platform_device *pdev)
config.dev = &tps6105x->client->dev;
config.init_data = pdata->regulator_data;
config.driver_data = tps6105x;
+ config.regmap = tps6105x->regmap;
/* Register regulator with framework */
tps6105x->regulator = devm_regulator_register(&pdev->dev,
--
2.1.4
next reply other threads:[~2015-10-07 0:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 0:47 Axel Lin [this message]
2015-10-07 12:55 ` Grigoryev Denis
2015-10-07 14:30 ` Mark Brown
2015-11-18 18:09 ` Applied "regulator: tps6105x: Convert to use regmap helper functions" to the regulator tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444178837.5561.1.camel@ingics.com \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=grigoryev@fastwel.ru \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome