From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Javier Martinez Canillas <javier@osg.samsung.com>
Subject: [PATCH 1/5] ARM: dts: Use GPIO constants for flags cells in exynos3250 boards
Date: Wed, 7 Oct 2015 15:14:13 +0200 [thread overview]
Message-ID: <1444223657-7248-2-git-send-email-javier@osg.samsung.com> (raw)
In-Reply-To: <1444223657-7248-1-git-send-email-javier@osg.samsung.com>
The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++----
arch/arm/boot/dts/exynos3250-rinato.dts | 10 +++++-----
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 540a0adf2be6..c14129e0761d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -52,13 +52,13 @@
regulator-name = "V_EMMC_2.8V-fixed";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -266,14 +266,14 @@
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 41a5fafb9aa9..830e216f7e10 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -49,7 +49,7 @@
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -188,8 +188,8 @@
reg = <0>;
vdd3-supply = <&ldo16_reg>;
vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 0>;
- te-gpios = <&gpx0 6 0>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
@@ -368,14 +368,14 @@
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
--
2.4.3
next prev parent reply other threads:[~2015-10-07 13:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 13:14 [PATCH 0/5] ARM: dts: Use GPIO constants for flags cells in exynos boards Javier Martinez Canillas
2015-10-07 13:14 ` Javier Martinez Canillas [this message]
2015-10-07 13:14 ` [PATCH 2/5] ARM: dts: Use GPIO constants for flags cells in exynos4120 boards Javier Martinez Canillas
2015-10-07 13:14 ` [PATCH 3/5] ARM: dts: Use GPIO constants for flags cells in exynos4412 boards Javier Martinez Canillas
2015-10-07 13:14 ` [PATCH 4/5] ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards Javier Martinez Canillas
2015-10-07 13:14 ` [PATCH 5/5] ARM: dts: Use GPIO constants for flags cells in exynos5440 boards Javier Martinez Canillas
2015-10-07 22:41 ` [PATCH 0/5] ARM: dts: Use GPIO constants for flags cells in exynos boards Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444223657-7248-2-git-send-email-javier@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®