mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH v3 1/5] ARM: sunxi: Add R8 support
Date: Fri,  9 Oct 2015 09:42:53 +0100	[thread overview]
Message-ID: <1444380177-15302-2-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1444380177-15302-1-git-send-email-maxime.ripard@free-electrons.com>

The R8 is a new Allwinner SoC based on the A13. While both are very
similar, there's still a few differences. Introduce a new compatible to
deal with them.

In order to have a consistent naming, instead of mentionning the allwinner
A series as the machine name, switch to sun4i/sun5i like what is done for
the other families.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/arm/sunxi/README                  | 2 +-
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 arch/arm/mach-sunxi/sunxi.c                     | 3 ++-
 drivers/clk/sunxi/clk-sunxi.c                   | 1 +
 4 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index 5e38e1582f95..430d279a8df3 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -25,7 +25,7 @@ SunXi family
         + Datasheet
           http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
 
-      - Allwinner A13 (sun5i)
+      - Allwinner A13 / R8 (sun5i)
         + Datasheet
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
         + User Manual
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 67da20539540..bb9b0faa919d 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -6,6 +6,7 @@ using one of the following compatible strings:
   allwinner,sun4i-a10
   allwinner,sun5i-a10s
   allwinner,sun5i-a13
+  allwinner,sun5i-r8
   allwinner,sun6i-a31
   allwinner,sun7i-a20
   allwinner,sun8i-a23
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 65bab2876343..8583a9ca86bd 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -26,10 +26,11 @@ static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
+	"allwinner,sun5i-r8",
 	NULL,
 };
 
-DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
 	.dt_compat	= sunxi_board_dt_compat,
 	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 413070d07b3f..9c79af0c03b2 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1196,6 +1196,7 @@ static void __init sun5i_init_clocks(struct device_node *node)
 }
 CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks);
 CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks);
+CLK_OF_DECLARE(sun5i_r8_clk_init, "allwinner,sun5i-r8", sun5i_init_clocks);
 CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks);
 
 static const char *sun6i_critical_clocks[] __initdata = {
-- 
2.5.3


  reply	other threads:[~2015-10-09  8:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-09  8:42 [PATCH v3 0/5] ARM: sunxi: Introduce CHIP support Maxime Ripard
2015-10-09  8:42 ` Maxime Ripard [this message]
2015-10-09 14:20   ` [PATCH v3 1/5] ARM: sunxi: Add R8 support Chen-Yu Tsai
2015-10-11 17:08     ` Maxime Ripard
2015-10-09  8:42 ` [PATCH v3 2/5] ARM: sun5i: Add R8 DTSI Maxime Ripard
2015-10-09  8:42 ` [PATCH v3 3/5] ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI Maxime Ripard
2015-10-09 14:22   ` Chen-Yu Tsai
2015-10-11 17:09     ` Maxime Ripard
2015-10-09  8:42 ` [PATCH v3 4/5] ARM: sun5i: dt: Add UART3 CTS and RTS pins Maxime Ripard
2015-10-09 14:24   ` Chen-Yu Tsai
2015-10-11 17:10     ` Maxime Ripard
2015-10-09  8:42 ` [PATCH v3 5/5] ARM: sun5i: Add C.H.I.P DTS Maxime Ripard
2015-10-09 15:22   ` Chen-Yu Tsai
2015-10-11 17:20     ` Maxime Ripard
2015-10-12  2:20       ` Chen-Yu Tsai
2015-10-12  9:32         ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444380177-15302-2-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®