From: WingMan Kwok <w-kwok2@ti.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <kishon@ti.com>, <rogerq@ti.com>,
<m-karicheri2@ti.com>, <bhelgaas@google.com>,
<ssantosh@kernel.org>, <linux@arm.linux.org.uk>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: WingMan Kwok <w-kwok2@ti.com>
Subject: [PATCH 3/3] ARM: keystone: dts: add PCI serdes driver bindings
Date: Tue, 13 Oct 2015 14:04:24 -0400 [thread overview]
Message-ID: <1444759464-32299-4-git-send-email-w-kwok2@ti.com> (raw)
In-Reply-To: <1444759464-32299-1-git-send-email-w-kwok2@ti.com>
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
---
arch/arm/boot/dts/k2e.dtsi | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/keystone.dtsi | 25 +++++++++++++++++++++++++
2 files changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 675fb8e..1ba47d8 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,6 +86,18 @@
gpio,syscon-dev = <&devctrl 0x240>;
};
+ pcie1_phy: pciephy@2326000 {
+ #phy-cells = <0>;
+ compatible = "ti,keystone-serdes-pcie";
+ reg = <0x02326000 0x4000>;
+ reg-names = "reg_serdes";
+ refclk-khz = <100000>;
+ link-rate-kbps = <5000000>;
+ phy-type = "pcie";
+ max-lanes = <2>;
+ status = "disabled";
+ };
+
pcie1: pcie@21020000 {
compatible = "ti,keystone-pcie","snps,dw-pcie";
clocks = <&clkpcie1>;
@@ -130,6 +142,18 @@
<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
};
+
+ /* PCIE phy */
+ serdeses {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ serdes@0 {
+ reg = <0>;
+ phys = <&pcie1_phy>;
+ status = "disabled";
+ };
+ };
+
};
mdio: mdio@24200f00 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 72816d6..5312319 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -275,6 +275,19 @@
ti,syscon-dev = <&devctrl 0x2a0>;
};
+ pcie0_phy: pciephy@2320000 {
+ #phy-cells = <0>;
+ compatible = "ti,keystone-serdes-pcie";
+ reg = <0x02320000 0x4000>;
+ reg-names = "reg_serdes";
+ refclk-khz = <100000>;
+ link-rate-kbps = <5000000>;
+ init-firmware = "k2_pcie_serdes_init.fw";
+ phy-type = "pcie";
+ max-lanes = <2>;
+ status = "disabled";
+ };
+
pcie0: pcie@21800000 {
compatible = "ti,keystone-pcie", "snps,dw-pcie";
clocks = <&clkpcie>;
@@ -319,6 +332,18 @@
<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
};
+
+ /* PCIE phy */
+ serdeses {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ serdes@0 {
+ reg = <0>;
+ phys = <&pcie0_phy>;
+ status = "disabled";
+ };
+ };
+
};
};
};
--
1.7.9.5
next prev parent reply other threads:[~2015-10-13 18:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-13 18:04 [PATCH 0/3] Common SerDes driver for TI's Keystone Platforms WingMan Kwok
2015-10-13 18:04 ` [PATCH 1/3] phy: keystone: serdes driver for gbe 10gbe and pcie WingMan Kwok
2015-10-13 18:33 ` Mark Rutland
2015-10-13 19:52 ` Kwok, WingMan
2015-10-13 22:58 ` Kishon Vijay Abraham I
2015-10-14 15:15 ` Kwok, WingMan
2015-10-13 18:04 ` [PATCH 2/3] PCI: keystone: update to use generic keystone serdes driver WingMan Kwok
2015-10-13 18:04 ` WingMan Kwok [this message]
2015-10-13 18:23 ` [PATCH 3/3] ARM: keystone: dts: add PCI serdes driver bindings Murali Karicheri
2015-10-13 20:12 ` Kwok, WingMan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444759464-32299-4-git-send-email-w-kwok2@ti.com \
--to=w-kwok2@ti.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=m-karicheri2@ti.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®