[PATCH 2/2] ARM: dts: omap3: keep ssi ports by default

[Roger Quadros <rogerq@ti.com>]

Let's keep the SSI ports disabled in the omap3.dtsi to avoid
getting the following noise on the console for boards that don't
use the SSI ports.

"omap_ssi_port 4805a000.ssi-port: DT data is missing cawake gpio (err=-2)"

As omap3-n900 uses one SSI port, mark it enabled there.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 1 +
 arch/arm/boot/dts/omap3.dtsi     | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3..bdb72fb 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -949,6 +949,7 @@
 };
 
 &ssi_port1 {
+	status = "ok";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ssi_pins>;
 
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8a2b253..25b0b37 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -815,6 +815,7 @@
 				interrupt-parent = <&intc>;
 				interrupts = <67>,
 					     <68>;
+				status = "disabled";
 			};
 
 			ssi_port2: ssi-port@4805b000 {
@@ -828,6 +829,7 @@
 				interrupt-parent = <&intc>;
 				interrupts = <69>,
 					     <70>;
+				status = "disabled";
 			};
 		};
 	};
-- 
2.1.4