[PATCH v6 0/7] arm64: berlin: add pinctrl support

[Jisheng Zhang <jszhang@marvell.com>]

This series adds support for Marvell berlin4ct pin-controller, allowing
to configure the pin muxing from the device tree.

Since v5:
 - add Sebastian and Antoine ack tag
 - Reorder the statements under the PINCTRL_BERLIN_BG4CT config option

Since v4:
 - drop ARCH_BERLIN dependency for it has been met
 - drop COMPILE_TEST dependency but make berlin pinctrl driver visible
   if COMPILE_TEST=y, and let this change be a seperate commit.

Since v3:
 - fix stupid build error: I missed local changes to berlin-bg4ct.c

Since v2:
 - introduce new berlin_pinctrl_probe_regmap() to avoid duplicated code
 - renaming such as s/urt/uart etc. but keep the group name as URT* to keep
   consistent with HW/ASIC

Since v1:
 - use generic name for pin functions
 - a new commit to add pinmux for uart0
 - correct pinctrl usage in dts

Jisheng Zhang (7):
  pinctrl: berlin: introduce berlin_pinctrl_probe_regmap()
  pinctrl: berlin: Make berlin pinctrl driver visible if COMPILE_TEST=y
  pinctrl: berlin: add the berlin4ct pinctrl driver
  arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
  pinctrl: dt-binding: document berlin4ct SoC pinctrl
  arm64: dts: berlin4ct: add the pinctrl node
  arm64: dts: berlin4ct: add default pinmux for uart0

 .../devicetree/bindings/pinctrl/berlin,pinctrl.txt |   5 +-
 arch/arm64/Kconfig.platforms                       |   1 +
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi         |  22 +
 drivers/pinctrl/berlin/Kconfig                     |   7 +-
 drivers/pinctrl/berlin/Makefile                    |   1 +
 drivers/pinctrl/berlin/berlin-bg4ct.c              | 503 +++++++++++++++++++++
 drivers/pinctrl/berlin/berlin.c                    |  26 +-
 drivers/pinctrl/berlin/berlin.h                    |   4 +
 8 files changed, 558 insertions(+), 11 deletions(-)
 create mode 100644 drivers/pinctrl/berlin/berlin-bg4ct.c

-- 
2.6.1