From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Subject: [PATCH 10/19] ARM: dts: at91: replace gpio-key,wakeup with wakeup-source property
Date: Wed, 21 Oct 2015 11:10:07 +0100 [thread overview]
Message-ID: <1445422216-29375-11-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1445422216-29375-1-git-send-email-sudeep.holla@arm.com>
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm/boot/dts/animeo_ip.dts | 6 +++---
arch/arm/boot/dts/at91-foxg20.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 4 ++--
arch/arm/boot/dts/at91-kizbox2.dts | 6 +++---
arch/arm/boot/dts/at91-kizboxmini.dts | 4 ++--
arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +-
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
arch/arm/boot/dts/at91sam9263ek.dts | 4 ++--
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++--
arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 ++--
arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
arch/arm/boot/dts/at91sam9rlek.dts | 4 ++--
arch/arm/boot/dts/sama5d35ek.dts | 2 +-
arch/arm/boot/dts/usb_a9260_common.dtsi | 2 +-
arch/arm/boot/dts/usb_a9263.dts | 2 +-
18 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b82796..0962f2fa3f6e 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -155,21 +155,21 @@
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
error_in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598af4c2b..6bf873e7d96c 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -159,7 +159,7 @@
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece0c027..8afe35f64034 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -94,14 +94,14 @@
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index f0b1563cb3f1..50a14568f094 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -171,21 +171,21 @@
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 9f72b4932634..9682d105d4d8 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -98,14 +98,14 @@
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53ab764..4f2eebf4a560 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -183,7 +183,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d81474e0bcd6..b0dd58f448fe 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -315,7 +315,7 @@
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 07f46963335b..c34a23b82e1a 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -235,7 +235,7 @@
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 49a59c7e4a5d..d4cf2cf119e4 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -277,7 +277,7 @@
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac020f23..facce0ef840b 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -149,7 +149,7 @@
ti,debounce-tol = /bits/ 16 <65535>;
ti,debounce-max = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
@@ -193,28 +193,28 @@
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 23381276ffb8..241de040681f 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -213,14 +213,14 @@
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2c5a1e..e45c744d3cc8 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -206,14 +206,14 @@
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index d1ae60a855d4..a251a193d208 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -321,14 +321,14 @@
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index efa75064d38a..a00cd1ded131 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -223,7 +223,7 @@
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f220bed..8a847c2d8e42 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -225,14 +225,14 @@
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left_click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index d9a9aca1ccfd..e812f5c1bf70 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -49,7 +49,7 @@
label = "pb_user1";
gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 12edafefd44a..9beea8976584 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -115,7 +115,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 68c0de36c339..8cc6edb29694 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -143,7 +143,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
--
1.9.1
next prev parent reply other threads:[~2015-10-21 10:14 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 10:09 [PATCH 00/19] devicetree: standardize/consolidate on "wakeup-source" property Sudeep Holla
2015-10-21 10:09 ` [PATCH 01/19] Documentation: " Sudeep Holla
2015-10-21 22:02 ` Rob Herring
2015-10-21 10:09 ` [PATCH 02/19] Documentation: devicetree: fix reference to legacy wakeup properties Sudeep Holla
2015-10-21 22:04 ` Rob Herring
2015-10-28 18:23 ` Sudeep Holla
2015-10-30 18:29 ` Rob Herring
2015-10-21 10:10 ` [PATCH 03/19] rtc: opal: enable support for the stardard "wakeup-source" property Sudeep Holla
2015-10-27 22:53 ` Alexandre Belloni
2015-10-21 10:10 ` [PATCH 04/19] rtc: isl12057: enable support for the standard " Sudeep Holla
2015-10-27 22:53 ` Alexandre Belloni
2015-10-21 10:10 ` [PATCH 05/19] mmc: core/host: " Sudeep Holla
2015-11-19 11:32 ` Ulf Hansson
2015-10-21 10:10 ` [PATCH 06/19] input: tegra-kbc: " Sudeep Holla
2015-10-23 6:39 ` Dmitry Torokhov
2015-10-23 10:23 ` Sudeep Holla
2015-10-26 8:33 ` Dmitry Torokhov
2015-10-21 10:10 ` [PATCH 07/19] ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-21 10:10 ` [PATCH 08/19] ARM: dts: spear: " Sudeep Holla
2015-10-21 10:10 ` [PATCH 09/19] ARM: dts: am335x: " Sudeep Holla
2015-12-15 16:33 ` Sudeep Holla
2015-12-17 17:58 ` Tony Lindgren
2015-10-21 10:10 ` Sudeep Holla [this message]
2015-10-21 10:21 ` [PATCH 10/19] ARM: dts: at91: " Nicolas Ferre
2015-10-21 10:25 ` Sudeep Holla
2015-10-21 11:01 ` Ulf Hansson
2015-10-21 11:13 ` Sudeep Holla
2015-10-21 12:41 ` Sudeep Holla
2015-10-21 15:27 ` Nicolas Ferre
2015-10-21 10:10 ` [PATCH 11/19] ARM: dts: imx: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-11-23 5:37 ` Shawn Guo
2015-11-26 11:33 ` Sudeep Holla
2015-12-02 1:54 ` Shawn Guo
2015-12-02 10:05 ` Sudeep Holla
2015-10-21 10:10 ` [PATCH 12/19] ARM: dts: exynos: " Sudeep Holla
2015-12-15 16:35 ` Sudeep Holla
2015-12-15 23:32 ` Krzysztof Kozlowski
2015-12-16 10:32 ` Sudeep Holla
2015-12-16 23:38 ` Krzysztof Kozlowski
2015-12-16 23:49 ` Krzysztof Kozlowski
2016-01-28 8:11 ` Krzysztof Kozlowski
2016-01-28 15:59 ` [UPDATE] " Sudeep Holla
2016-01-29 0:11 ` Krzysztof Kozlowski
2015-10-21 10:10 ` [PATCH 13/19] ARM: dts: tegra: " Sudeep Holla
2015-12-15 16:35 ` Sudeep Holla
2015-12-23 11:24 ` Sudeep Holla
2015-10-21 10:10 ` [PATCH 14/19] ARM: dts: shmobile/r8a7xxx: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-21 10:18 ` Geert Uytterhoeven
2015-10-21 10:23 ` Sudeep Holla
2015-10-22 0:50 ` Simon Horman
2015-10-22 9:37 ` Sudeep Holla
2015-10-23 0:18 ` Simon Horman
2015-10-21 10:10 ` [PATCH 15/19] ARM: dts: omap: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-12-15 16:37 ` Sudeep Holla
2015-12-17 17:58 ` Tony Lindgren
2015-10-21 10:10 ` [PATCH 16/19] ARM: dts: s5pv210: " Sudeep Holla
2015-12-15 16:37 ` Sudeep Holla
2015-12-16 23:52 ` Krzysztof Kozlowski
2015-10-21 10:10 ` [PATCH 17/19] ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property Sudeep Holla
2015-12-15 16:39 ` Sudeep Holla
2015-12-15 16:56 ` Gregory CLEMENT
2015-10-21 10:10 ` [PATCH 18/19] ARM: dts: ste: replace legacy *,wakeup property with wakeup-source Sudeep Holla
2015-10-27 12:34 ` Linus Walleij
2015-10-27 12:46 ` Sudeep Holla
2015-11-05 9:26 ` Linus Walleij
2015-10-21 10:10 ` [PATCH 19/19] ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property Sudeep Holla
2015-10-29 8:56 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445422216-29375-11-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®