mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yakir Yang <ykk@rock-chips.com>
To: Inki Dae <inki.dae@samsung.com>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Seung-Woo Kim <sw0312.kim@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Thierry Reding <treding@nvidia.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	joe@perches.com, Heiko Stuebner <heiko@sntech.de>,
	Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <linux@arm.linux.org.uk>,
	djkurtz@chromium.org, dianders@chromium.org,
	Sean Paul <seanpaul@chromium.org>, Kukjin Kim <kgene@kernel.org>,
	Kumar Gala <galak@codeaurora.org>,
	emil.l.velikov@gmail.com,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Pawel Moll <pawel.moll@arm.com>,
	ajaynumb@gmail.com, robherring2@gmail.com,
	javier@osg.samsung.com, Andy Yan <andy.yan@rock-chips.com>,
	Yakir Yang <ykk@rock-chips.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Date: Sat, 24 Oct 2015 11:06:41 +0800	[thread overview]
Message-ID: <1445656003-15300-5-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1445656003-15300-1-git-send-email-ykk@rock-chips.com>

Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
  hpd when hpd detect failed.

Changes in v2: None

 .../bindings/display/bridge/analogix_dp.txt        |  4 ++-
 .../bindings/display/exynos/exynos_dp.txt          |  1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |  1 +
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++++++++++++++++++---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  2 ++
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  9 ++++++
 6 files changed, 47 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
 		from general PHY binding: Should be "dp".
 
 Optional properties for dp-controller:
+	-analogix,need-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.
 	-hpd-gpios:
 		Hotplug detect GPIO.
 		Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
 		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 
-
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
 
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9e47357..e9b0548 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding document:
 	-phys (required)
 	-phy-names (required)
 	-hpd-gpios (optional)
+	-analogix,need-force-hpd (optional)
 	-video interfaces (optional)
 
 Deprecated properties for DisplayPort:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index ec93917..be18388 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -31,6 +31,7 @@ For the below properties, please refer to Analogix DP binding document:
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)
+- analogix,need-force-hpd (optional)
 -------------------------------------------------------------------------------
 
 Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 563ffb1d..3842dbd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
 {
 	int timeout_loop = 0;
 
-	while (analogix_dp_get_plug_in_status(dp) != 0) {
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
 		timeout_loop++;
-		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
-			dev_err(dp->dev, "failed to get hpd plug status\n");
-			return -ETIMEDOUT;
-		}
 		usleep_range(10, 11);
 	}
 
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "need-force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->need_force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
 	return 0;
 }
 
@@ -1244,6 +1267,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 	if (IS_ERR(dp->reg_base))
 		return PTR_ERR(dp->reg_base);
 
+	dp->need_force_hpd =
+		of_property_read_bool(dev->of_node, "analogix,need-force-hpd");
+
 	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
 	if (!gpio_is_valid(dp->hpd_gpio))
 		dp->hpd_gpio = of_get_named_gpio(dev->of_node,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index e6f8243..d3c7e0a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -160,6 +160,7 @@ struct analogix_dp_device {
 	struct phy		*phy;
 	int			dpms_mode;
 	int			hpd_gpio;
+	bool                    need_force_hpd;
 
 	struct analogix_dp_plat_data *plat_data;
 };
@@ -180,6 +181,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 				       bool enable);
 void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
 void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
 void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
 void analogix_dp_reset_aux(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 21a3287..c7e2959 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -365,6 +365,15 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
 }
 
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
 	u32 reg;
-- 
2.1.2



  parent reply	other threads:[~2015-10-24  3:09 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23 11:23 [PATCH v7 0/17] Add Analogix Core Display Port Driver Yakir Yang
2015-10-23 11:29 ` [PATCH v7 01/17] drm: exynos: dp: convert to drm bridge mode Yakir Yang
2015-10-23 11:29   ` [PATCH v7 02/17] drm: bridge: analogix/dp: split exynos dp driver to bridge directory Yakir Yang
2015-10-23 11:29   ` [PATCH v7 03/17] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-10-23 11:29   ` [PATCH v7 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-10-23 11:29   ` [PATCH v7 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-10-24  3:06 ` [PATCH v7 06/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-10-24  3:06   ` [PATCH v7 07/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-10-24  3:06   ` [PATCH v7 08/17] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-10-24  3:06   ` [PATCH v7 09/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-10-27 21:14     ` Heiko Stuebner
2015-10-28  2:09       ` Yakir Yang
2015-10-24  3:06   ` [PATCH v7 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-10-27 21:23     ` Heiko Stuebner
2015-10-28  1:46       ` Yakir Yang
2015-10-28  1:49       ` Yakir Yang
2015-10-27 21:04   ` [PATCH v7 06/17] Documentation: drm/bridge: add document for analogix_dp Heiko Stuebner
2015-10-28  2:08     ` Yakir Yang
2015-10-24  3:06 ` [PATCH v7 11/17] Documentation: phy: add document for rockchip dp phy Yakir Yang
2015-10-24  3:06   ` [PATCH v7 12/17] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-10-24  3:06   ` [PATCH v7 13/17] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-10-24  3:06   ` [PATCH v7 14/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-10-24  3:06   ` Yakir Yang [this message]
2015-10-27 21:24   ` [PATCH v7 11/17] Documentation: phy: add document for rockchip dp phy Heiko Stuebner
2015-10-28  2:26     ` Yakir Yang
2015-10-27 23:08   ` Heiko Stuebner
2015-10-28  2:26     ` Yakir Yang
2015-10-24  3:21 ` [PATCH v7 16/17] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-10-24  3:21   ` [PATCH v7 17/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445656003-15300-5-git-send-email-ykk@rock-chips.com \
    --to=ykk@rock-chips.com \
    --cc=a.hajda@samsung.com \
    --cc=ajaynumb@gmail.com \
    --cc=andy.yan@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=galak@codeaurora.org \
    --cc=gustavo.padovan@collabora.co.uk \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=inki.dae@samsung.com \
    --cc=javier@osg.samsung.com \
    --cc=jingoohan1@gmail.com \
    --cc=joe@perches.com \
    --cc=jy0922.shim@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=kishon@ti.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.yao@rock-chips.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robherring2@gmail.com \
    --cc=seanpaul@chromium.org \
    --cc=sw0312.kim@samsung.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®