From: Ludovic Desroches <ludovic.desroches@atmel.com>
To: <ulf.hansson@linaro.org>
Cc: <linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<nicolas.ferre@atmel.com>, <linux-arm-kernel@lists.infradead.org>,
Ludovic Desroches <ludovic.desroches@atmel.com>
Subject: [PATCH v2] mmc: sdhci at91: add PM support
Date: Tue, 10 Nov 2015 11:36:50 +0100 [thread overview]
Message-ID: <1447151810-21864-1-git-send-email-ludovic.desroches@atmel.com> (raw)
Add runtime PM support and use runtime_force_suspend|resume() for system
PM.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
Changes:
- from v1: take a runtime PM centric approach
drivers/mmc/host/sdhci-of-at91.c | 66 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 06d0b50..5dbe0ce 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -21,6 +21,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
@@ -51,6 +53,62 @@ static const struct of_device_id sdhci_at91_dt_match[] = {
{}
};
+#ifdef CONFIG_PM
+static int sdhci_at91_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_at91_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = sdhci_runtime_suspend_host(host);
+
+ clk_disable_unprepare(priv->gck);
+ clk_disable_unprepare(priv->hclock);
+ clk_disable_unprepare(priv->mainck);
+
+ return ret;
+}
+
+static int sdhci_at91_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_at91_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = clk_prepare_enable(priv->mainck);
+ if (ret) {
+ dev_err(dev, "can't enable mainck\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->hclock);
+ if (ret) {
+ dev_err(dev, "can't enable hclock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->gck);
+ if (ret) {
+ dev_err(dev, "can't enable gck\n");
+ return ret;
+ }
+
+ return sdhci_runtime_resume_host(host);
+}
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
+ sdhci_at91_runtime_resume,
+ NULL)
+};
+
static int sdhci_at91_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
@@ -148,6 +206,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
if (ret)
goto clocks_disable_unprepare;
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
return 0;
clocks_disable_unprepare:
@@ -165,6 +228,7 @@ static int sdhci_at91_remove(struct platform_device *pdev)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = pltfm_host->priv;
+ pm_runtime_disable(&pdev->dev);
sdhci_pltfm_unregister(pdev);
clk_disable_unprepare(priv->gck);
@@ -178,7 +242,7 @@ static struct platform_driver sdhci_at91_driver = {
.driver = {
.name = "sdhci-at91",
.of_match_table = sdhci_at91_dt_match,
- .pm = SDHCI_PLTFM_PMOPS,
+ .pm = &sdhci_at91_dev_pm_ops,
},
.probe = sdhci_at91_probe,
.remove = sdhci_at91_remove,
--
2.5.0
next reply other threads:[~2015-11-10 10:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-10 10:36 Ludovic Desroches [this message]
2015-11-10 11:12 ` Ulf Hansson
2015-11-10 13:21 ` Ludovic Desroches
2015-11-26 16:07 ` Ludovic Desroches
2015-11-26 16:24 ` Ulf Hansson
2015-11-26 16:32 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447151810-21864-1-git-send-email-ludovic.desroches@atmel.com \
--to=ludovic.desroches@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®