[RESEND PATCH v2 4/6] ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi

[Javier Martinez Canillas <javier@osg.samsung.com>]

The eMMC is non-removable so is marked with the non-removable DT
property to avoid having to redetect it after a suspend/resume.

But it also has the broken-cd property which is wrong since only
one of the DT properties for card detection should be used.

Also remove the card-detect-delay property that is not needed with
non-removable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
---

 arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index ca3a467a585d..7b018e451880 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -652,12 +652,10 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
-- 
2.4.3