From: Nikita Kiryanov <nikita@compulab.co.il>
To: broonie@kernel.org, lgirdwood@gmail.com,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Nikita Kiryanov <nikita@compulab.co.il>,
Tony Lindgren <tony@atomide.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH] regulator: tps65218: add support for LS3 current regulator
Date: Wed, 25 Nov 2015 13:59:04 +0200 [thread overview]
Message-ID: <1448452744-17126-1-git-send-email-nikita@compulab.co.il> (raw)
Add support for TPS65218 LS3 current regulator, which is capable of 4
current input limit modes: 100, 200, 500, and 1000 uA.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/tps65218-regulator.c | 137 +++++++++++++++++++++++++--------
include/linux/mfd/tps65218.h | 7 +-
include/linux/regulator/driver.h | 2 +
3 files changed, 115 insertions(+), 31 deletions(-)
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 7f97223..d88eb57 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -27,19 +27,22 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65218.h>
-enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, DCDC5, DCDC6, LDO1 };
+enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
+ DCDC5, DCDC6, LDO1, LS3 };
-#define TPS65218_REGULATOR(_name, _id, _ops, _n, _vr, _vm, _er, _em, \
- _lr, _nlr, _delay, _fuv) \
+#define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \
+ _cr, _cm, _lr, _nlr, _delay, _fuv) \
{ \
.name = _name, \
.id = _id, \
.ops = &_ops, \
.n_voltages = _n, \
- .type = REGULATOR_VOLTAGE, \
+ .type = _type, \
.owner = THIS_MODULE, \
.vsel_reg = _vr, \
.vsel_mask = _vm, \
+ .csel_reg = _cr, \
+ .csel_mask = _cm, \
.enable_reg = _er, \
.enable_mask = _em, \
.volt_table = NULL, \
@@ -80,6 +83,7 @@ static struct tps_info tps65218_pmic_regs[] = {
TPS65218_INFO(DCDC5, "DCDC5", 1000000, 1000000),
TPS65218_INFO(DCDC6, "DCDC6", 1800000, 1800000),
TPS65218_INFO(LDO1, "LDO1", 900000, 3400000),
+ TPS65218_INFO(LS3, "LS3", -1, -1),
};
#define TPS65218_OF_MATCH(comp, label) \
@@ -96,6 +100,7 @@ static const struct of_device_id tps65218_of_match[] = {
TPS65218_OF_MATCH("ti,tps65218-dcdc5", tps65218_pmic_regs[DCDC5]),
TPS65218_OF_MATCH("ti,tps65218-dcdc6", tps65218_pmic_regs[DCDC6]),
TPS65218_OF_MATCH("ti,tps65218-ldo1", tps65218_pmic_regs[LDO1]),
+ TPS65218_OF_MATCH("ti,tps65218-ls3", tps65218_pmic_regs[LS3]),
{ }
};
MODULE_DEVICE_TABLE(of, tps65218_of_match);
@@ -175,6 +180,68 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
.map_voltage = regulator_map_voltage_linear_range,
};
+static const int ls3_currents[] = { 100, 200, 500, 1000 };
+
+static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
+ int lim_uA)
+{
+ unsigned int index = 0;
+ unsigned int num_currents = ARRAY_SIZE(ls3_currents);
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ while (index < num_currents && ls3_currents[index] != lim_uA)
+ index++;
+
+ if (index == num_currents)
+ return -EINVAL;
+
+ return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
+ index << 2, TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
+ int min_uA, int max_uA)
+{
+ int index = 0;
+ unsigned int num_currents = ARRAY_SIZE(ls3_currents);
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ while (index < num_currents && ls3_currents[index] < max_uA)
+ index++;
+
+ index--;
+
+ if (index < 0 || ls3_currents[index] < min_uA)
+ return -EINVAL;
+
+ return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
+ index << 2, TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
+{
+ int retval;
+ unsigned int index;
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ retval = tps65218_reg_read(tps, dev->desc->csel_reg, &index);
+ if (retval < 0)
+ return retval;
+
+ index = (index & dev->desc->csel_mask) >> 2;
+
+ return ls3_currents[index];
+}
+
+static struct regulator_ops tps65218_ls3_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = tps65218_pmic_enable,
+ .disable = tps65218_pmic_disable,
+ .set_input_current_limit = tps65218_pmic_set_input_current_lim,
+ .set_current_limit = tps65218_pmic_set_current_limit,
+ .get_current_limit = tps65218_pmic_get_current_limit,
+};
+
/* Operations permitted on DCDC5, DCDC6 */
static struct regulator_ops tps65218_dcdc56_pmic_ops = {
.is_enabled = regulator_is_enabled_regmap,
@@ -183,36 +250,46 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = {
};
static const struct regulator_desc regulators[] = {
- TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, tps65218_dcdc12_ops, 64,
- TPS65218_REG_CONTROL_DCDC1,
- TPS65218_CONTROL_DCDC1_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC1_EN,
- dcdc1_dcdc2_ranges, 2, 4000, 0),
- TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, tps65218_dcdc12_ops, 64,
- TPS65218_REG_CONTROL_DCDC2,
- TPS65218_CONTROL_DCDC2_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC2_EN,
- dcdc1_dcdc2_ranges, 2, 4000, 0),
- TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, tps65218_ldo1_dcdc34_ops,
- 64, TPS65218_REG_CONTROL_DCDC3,
+ TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, REGULATOR_VOLTAGE,
+ tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1,
+ TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges,
+ 2, 4000, 0),
+ TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE,
+ tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2,
+ TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges,
+ 2, 4000, 0),
+ TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 64,
+ TPS65218_REG_CONTROL_DCDC3,
TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC3_EN, ldo1_dcdc3_ranges, 2, 0, 0),
- TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, tps65218_ldo1_dcdc34_ops,
- 53, TPS65218_REG_CONTROL_DCDC4,
- TPS65218_CONTROL_DCDC4_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC4_EN,
- dcdc4_ranges, 2, 0, 0),
- TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, tps65218_dcdc56_pmic_ops,
- 1, -1, -1, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC5_EN, NULL, 0, 0, 1000000),
- TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, tps65218_dcdc56_pmic_ops,
- 1, -1, -1, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC6_EN, NULL, 0, 0, 1800000),
- TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, tps65218_ldo1_dcdc34_ops, 64,
+ TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2,
+ 0, 0),
+ TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 53,
+ TPS65218_REG_CONTROL_DCDC4,
+ TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2,
+ 0, 0),
+ TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE,
+ tps65218_dcdc56_pmic_ops, 1, -1, -1,
+ TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0,
+ NULL, 0, 0, 1000000),
+ TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE,
+ tps65218_dcdc56_pmic_ops, 1, -1, -1,
+ TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0,
+ NULL, 0, 0, 1800000),
+ TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 64,
TPS65218_REG_CONTROL_LDO1,
TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2,
- TPS65218_ENABLE2_LDO1_EN, ldo1_dcdc3_ranges,
+ TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
2, 0, 0),
+ TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT,
+ tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2,
+ TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2,
+ TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0),
};
static int tps65218_regulator_probe(struct platform_device *pdev)
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index 2f9b593..d58f3b5 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -200,6 +200,8 @@ enum tps65218_regulator_id {
TPS65218_DCDC_4,
TPS65218_DCDC_5,
TPS65218_DCDC_6,
+ /* LS's */
+ TPS65218_LS_3,
/* LDOs */
TPS65218_LDO_1,
};
@@ -210,8 +212,11 @@ enum tps65218_regulator_id {
#define TPS65218_NUM_DCDC 6
/* Number of LDO voltage regulators available */
#define TPS65218_NUM_LDO 1
+/* Number of total LS current regulators available */
+#define TPS65218_NUM_LS 1
/* Number of total regulators available */
-#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO)
+#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \
+ + TPS65218_NUM_LS)
/* Define the TPS65218 IRQ numbers */
enum tps65218_irqs {
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4db9fbe..fe77709 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -299,6 +299,8 @@ struct regulator_desc {
unsigned int vsel_reg;
unsigned int vsel_mask;
+ unsigned int csel_reg;
+ unsigned int csel_mask;
unsigned int apply_reg;
unsigned int apply_bit;
unsigned int enable_reg;
--
1.9.1
next reply other threads:[~2015-11-25 11:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 11:59 Nikita Kiryanov [this message]
2015-11-25 13:00 ` Applied "regulator: tps65218: add support for LS3 current regulator" to the regulator tree Mark Brown
2015-11-26 10:10 ` [PATCH] regulator: tps65218: add support for LS3 current regulator Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448452744-17126-1-git-send-email-nikita@compulab.co.il \
--to=nikita@compulab.co.il \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®