mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>,
	Kyeongdon Kim <kyeongdon.kim@lge.com>,
	linux-kernel@vger.kernel.org,
	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: [PATCH v3 2/2] zram: try vmalloc() after kmalloc()
Date: Fri, 27 Nov 2015 13:10:49 +0900	[thread overview]
Message-ID: <1448597449-17579-3-git-send-email-sergey.senozhatsky@gmail.com> (raw)
In-Reply-To: <1448597449-17579-1-git-send-email-sergey.senozhatsky@gmail.com>

From: Kyeongdon Kim <kyeongdon.kim@lge.com>

When we're using LZ4 multi compression streams for zram swap,
we found out page allocation failure message in system running test.
That was not only once, but a few(2 - 5 times per test).
Also, some failure cases were continually occurring to try allocation
order 3.

In order to make parallel compression private data, we should call
kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order
 2/3 size memory to allocate in that time, page allocation fails.
This patch makes to use vmalloc() as fallback of kmalloc(), this
prevents page alloc failure warning.

After using this, we never found warning message in running test, also
It could reduce process startup latency about 60-120ms in each case.

For reference a call trace :

Binder_1: page allocation failure: order:3, mode:0x10c0d0
CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20
Call trace:
[<ffffffc0002069c8>] dump_backtrace+0x0/0x270
[<ffffffc000206c48>] show_stack+0x10/0x1c
[<ffffffc000cb51c8>] dump_stack+0x1c/0x28
[<ffffffc0002bbfc8>] warn_alloc_failed+0xfc/0x11c
[<ffffffc0002bf518>] __alloc_pages_nodemask+0x724/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0002ed6a4>] kmalloc_order_trace+0x38/0xd8
[<ffffffc0005d9738>] zcomp_lz4_create+0x2c/0x38
[<ffffffc0005d78f0>] zcomp_strm_alloc+0x34/0x78
[<ffffffc0005d7a58>] zcomp_strm_multi_find+0x124/0x1ec
[<ffffffc0005d7c14>] zcomp_strm_find+0xc/0x18
[<ffffffc0005d8fa0>] zram_bvec_rw+0x2fc/0x780
[<ffffffc0005d9680>] zram_make_request+0x25c/0x2d4
[<ffffffc00040f8ac>] generic_make_request+0x80/0xbc
[<ffffffc00040f98c>] submit_bio+0xa4/0x15c
[<ffffffc0002e8bb0>] __swap_writepage+0x218/0x230
[<ffffffc0002e8c04>] swap_writepage+0x3c/0x4c
[<ffffffc0002c7384>] shrink_page_list+0x51c/0x8d0
[<ffffffc0002c7e88>] shrink_inactive_list+0x3f8/0x60c
[<ffffffc0002c86c8>] shrink_lruvec+0x33c/0x4cc
[<ffffffc0002c8894>] shrink_zone+0x3c/0x100
[<ffffffc0002c8c10>] try_to_free_pages+0x2b8/0x54c
[<ffffffc0002bf308>] __alloc_pages_nodemask+0x514/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0003446cc>] proc_info_read+0x50/0xe4
[<ffffffc0002f5204>] vfs_read+0xa0/0x12c
[<ffffffc0002f59c8>] SyS_read+0x44/0x74
DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB
     0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB

[minchan: change vmalloc gfp and adding comment about gfp]
[sergey: tweak comments and styles]
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
 drivers/block/zram/zcomp_lz4.c | 23 +++++++++++++++++++++--
 drivers/block/zram/zcomp_lzo.c | 23 +++++++++++++++++++++--
 2 files changed, 42 insertions(+), 4 deletions(-)

diff --git a/drivers/block/zram/zcomp_lz4.c b/drivers/block/zram/zcomp_lz4.c
index ee44b51..f2bfced 100644
--- a/drivers/block/zram/zcomp_lz4.c
+++ b/drivers/block/zram/zcomp_lz4.c
@@ -10,17 +10,36 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/lz4.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
 
 #include "zcomp_lz4.h"
 
 static void *zcomp_lz4_create(void)
 {
-	return kzalloc(LZ4_MEM_COMPRESS, GFP_NOIO);
+	void *ret;
+
+	/*
+	 * This function can be called in swapout/fs write path
+	 * so we can't use GFP_FS|IO. And it assumes we already
+	 * have at least one stream in zram initialization so we
+	 * don't do best effort to allocate more stream in here.
+	 * A default stream will work well without further multiple
+	 * streams. That's why we use NORETRY | NOWARN | NOMEMALLOC.
+	 */
+	ret = kzalloc(LZ4_MEM_COMPRESS, GFP_NOIO | __GFP_NORETRY |
+					__GFP_NOWARN | __GFP_NOMEMALLOC);
+	if (!ret)
+		ret = __vmalloc(LZ4_MEM_COMPRESS,
+				GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN |
+				__GFP_NOMEMALLOC | __GFP_ZERO | __GFP_HIGHMEM,
+				PAGE_KERNEL);
+	return ret;
 }
 
 static void zcomp_lz4_destroy(void *private)
 {
-	kfree(private);
+	kvfree(private);
 }
 
 static int zcomp_lz4_compress(const unsigned char *src, unsigned char *dst,
diff --git a/drivers/block/zram/zcomp_lzo.c b/drivers/block/zram/zcomp_lzo.c
index 683ce04..7fbb4a3 100644
--- a/drivers/block/zram/zcomp_lzo.c
+++ b/drivers/block/zram/zcomp_lzo.c
@@ -10,17 +10,36 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/lzo.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
 
 #include "zcomp_lzo.h"
 
 static void *lzo_create(void)
 {
-	return kzalloc(LZO1X_MEM_COMPRESS, GFP_NOIO);
+	void *ret;
+
+	/*
+	 * This function can be called in swapout/fs write path
+	 * so we can't use GFP_FS|IO. And it assumes we already
+	 * have at least one stream in zram initialization so we
+	 * don't do best effort to allocate more stream in here.
+	 * A default stream will work well without further multiple
+	 * streams. That's why we use NORETRY | NOWARN | NOMEMALLOC.
+	 */
+	ret = kzalloc(LZO1X_MEM_COMPRESS, GFP_NOIO | __GFP_NORETRY |
+					__GFP_NOWARN | __GFP_NOMEMALLOC);
+	if (!ret)
+		ret = __vmalloc(LZO1X_MEM_COMPRESS,
+				GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN |
+				__GFP_NOMEMALLOC | __GFP_ZERO | __GFP_HIGHMEM,
+				PAGE_KERNEL);
+	return ret;
 }
 
 static void lzo_destroy(void *private)
 {
-	kfree(private);
+	kvfree(private);
 }
 
 static int lzo_compress(const unsigned char *src, unsigned char *dst,
-- 
2.6.3.368.gf34be46


  parent reply	other threads:[~2015-11-27  4:11 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-27  4:10 [PATCH v3 0/2] zram/zcomp: stream allocation fixes and tweaks Sergey Senozhatsky
2015-11-27  4:10 ` [PATCH v3 1/2] zram/zcomp: use GFP_NOIO to allocate streams Sergey Senozhatsky
2015-11-30  7:09   ` Minchan Kim
2015-11-27  4:10 ` Sergey Senozhatsky [this message]
2015-11-30  7:10   ` [PATCH v3 2/2] zram: try vmalloc() after kmalloc() Minchan Kim
2015-11-30 10:42     ` kyeongdon.kim
2015-11-30 11:14       ` Sergey Senozhatsky
2015-12-01  2:04         ` kyeongdon.kim
     [not found]       ` <20151130231841.GA960@bbox>
2015-12-01  0:33         ` Sergey Senozhatsky
2015-12-01  2:31         ` Re: " kyeongdon.kim
2015-12-01  4:44           ` Minchan Kim
     [not found]             ` <20151201045535.GA5999@bbox>
2015-12-01  5:16               ` Sergey Senozhatsky
2015-12-01  6:35                 ` Kyeongdon Kim
2015-12-01  7:15                   ` Sergey Senozhatsky
2015-12-01  7:33                     ` Sergey Senozhatsky
2015-12-01  8:16                     ` Minchan Kim
2015-12-01  9:11                       ` Sergey Senozhatsky
2015-12-01  7:24                   ` Sergey Senozhatsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448597449-17579-3-git-send-email-sergey.senozhatsky@gmail.com \
    --to=sergey.senozhatsky.work@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=kyeongdon.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=minchan@kernel.org \
    --cc=sergey.senozhatsky@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®