From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753181AbbK3Jxo (ORCPT ); Mon, 30 Nov 2015 04:53:44 -0500 Received: from conuserg011.nifty.com ([202.248.44.37]:31259 "EHLO conuserg011-v.nifty.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751816AbbK3Jxn (ORCPT ); Mon, 30 Nov 2015 04:53:43 -0500 X-Nifty-SrcIP: [153.142.97.90] From: Masahiro Yamada To: linux-i2c@vger.kernel.org Cc: Masahiro Yamada , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Wolfram Sang Subject: [PATCH 4/4] i2c: uniphier_f: error out if bus speed is zero Date: Mon, 30 Nov 2015 18:53:36 +0900 Message-Id: <1448877216-32286-5-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1448877216-32286-1-git-send-email-yamada.masahiro@socionext.com> References: <1448877216-32286-1-git-send-email-yamada.masahiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There is code to divide by "bus_speed" some lines below. To eliminate the possibility of division by zero, bail out if "clock-frequency" is specified as zero. Signed-off-by: Masahiro Yamada --- drivers/i2c/busses/i2c-uniphier-f.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index 67109e1..f3e5ff8 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -466,6 +466,11 @@ static int uniphier_fi2c_clk_init(struct device *dev, if (of_property_read_u32(np, "clock-frequency", &bus_speed)) bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED; + if (!bus_speed) { + dev_err(dev, "clock-freqyency should not be zero\n"); + return -EINVAL; + } + if (bus_speed > UNIPHIER_FI2C_MAX_SPEED) bus_speed = UNIPHIER_FI2C_MAX_SPEED; -- 1.9.1