From: Vladimir Murzin <vladimir.murzin@arm.com>
To: arnd@arndb.de, linux@arm.linux.org.uk,
gregkh@linuxfoundation.org, daniel.lezcano@linaro.org,
tglx@linutronix.de, u.kleine-koenig@pengutronix.de,
afaerber@suse.de, mcoquelin.stm32@gmail.com
Cc: Mark.Rutland@arm.com, Pawel.Moll@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
jslaby@suse.cz, robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-serial@vger.kernel.org, linux-api@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 08/10] ARM: configs: add MPS2 defconfig
Date: Wed, 2 Dec 2015 09:33:08 +0000 [thread overview]
Message-ID: <1449048790-25859-9-git-send-email-vladimir.murzin@arm.com> (raw)
In-Reply-To: <1449048790-25859-1-git-send-email-vladimir.murzin@arm.com>
This patch adds a new config for MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
arch/arm/configs/mps2_defconfig | 112 +++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 arch/arm/configs/mps2_defconfig
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
new file mode 100644
index 0000000..c36c519
--- /dev/null
+++ b/arch/arm/configs/mps2_defconfig
@@ -0,0 +1,112 @@
+# CONFIG_USELIB is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLOCK is not set
+# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
+CONFIG_ARCH_MPS2=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x21000000
+CONFIG_DRAM_SIZE=0x1000000
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_MPS2_UART_CONSOLE=y
+CONFIG_SERIAL_MPS2_UART=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_MEMTEST=y
--
1.7.9.5
next prev parent reply other threads:[~2015-12-02 9:33 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-02 9:33 [PATCH v1 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 01/10] dt-bindings: document the MPS2 timer bindings Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 02/10] clockevents/drivers: add MPS2 Timer driver Vladimir Murzin
2015-12-07 9:25 ` Vladimir Murzin
2015-12-14 13:36 ` Daniel Lezcano
2015-12-15 12:47 ` Vladimir Murzin
2015-12-14 13:56 ` Rob Herring
2015-12-15 13:16 ` Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 03/10] dt-bindings: document the MPS2 UART bindings Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin
2015-12-07 9:26 ` Vladimir Murzin
2015-12-12 23:39 ` Andy Shevchenko
2015-12-13 7:00 ` Greg Kroah-Hartman
2015-12-15 12:40 ` Vladimir Murzin
2015-12-17 13:15 ` Andy Shevchenko
2015-12-02 9:33 ` [PATCH v1 05/10] serial: mps2-uart: add support for early console Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 06/10] ARM: mps2: introduce MPS2 platform Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 07/10] ARM: mps2: add low-level debug support Vladimir Murzin
2015-12-02 9:33 ` Vladimir Murzin [this message]
2015-12-02 9:33 ` [PATCH v1 09/10] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
2015-12-23 9:33 ` Vladimir Murzin
2015-12-02 9:33 ` [PATCH v1 10/10] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449048790-25859-9-git-send-email-vladimir.murzin@arm.com \
--to=vladimir.murzin@arm.com \
--cc=Mark.Rutland@arm.com \
--cc=Pawel.Moll@arm.com \
--cc=afaerber@suse.de \
--cc=arnd@arndb.de \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jslaby@suse.cz \
--cc=linux-api@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®