From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933418AbbLONg5 (ORCPT ); Tue, 15 Dec 2015 08:36:57 -0500 Received: from foss.arm.com ([217.140.101.70]:48797 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752496AbbLONg4 (ORCPT ); Tue, 15 Dec 2015 08:36:56 -0500 From: Andre Przywara To: rob.herring@linaro.org, Pawel Moll , ijc+devicetree@hellion.org.uk, marc.zyngier@arm.com Cc: catalin.marinas@arm.com, will.deacon@arm.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kumar Gala Subject: [PATCH v2 0/4] add support for GICv3 on the Foundation model Date: Tue, 15 Dec 2015 13:36:34 +0000 Message-Id: <1450186598-24504-1-git-send-email-andre.przywara@arm.com> X-Mailer: git-send-email 2.5.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, this is v2 adressing the two comments that Marc had on the previous version. Changelog: - remove bogus affinity field from GICv3 maintenance interrupt - replace commit message for patch 2/4 ---------------- The freely available ARM Foundation model [1] supports emulating a GICv3 interrupt controller (--gicv3). To provide the kernel with the proper information, prepare the existing model .dts to be split up and eventually create a new .dts file which can be used to boot a kernel using the GICv3 in the model. Patch 1/4 changes the common device tree to allow sharing most of the definitions later, while patch 2/4 is a drive-by-fix to add support for the recently enabled EOImode=1. Patch 3/4 splits the existing DT up to have a common .dtsi file and a stub foundation-v8.dts in preparation for the final patch 4/4, which adds a new foundation-v8-gicv3.dts that has the required GICv3 node. Together with the GICv3 support of the bootwrapper this allows to boot Linux and make it use the GICv3 interrupt controller. Cheers, Andre. [1]: http://www.arm.com/products/tools/models/fast-models/foundation-model.php Andre Przywara (4): arm64: dts: prepare foundation-v8.dts to cope with GICv3 arm64: dts: Foundation model: increase GICC region to allow EOImode=1 arm64: dts: split Foundation model dts to put the GIC separately arm64: dts: add .dts for GICv3 Foundation model arch/arm64/boot/dts/arm/Makefile | 2 +- arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts | 30 +++ arch/arm64/boot/dts/arm/foundation-v8.dts | 227 +-------------------- .../arm/{foundation-v8.dts => foundation-v8.dtsi} | 98 ++++----- 4 files changed, 78 insertions(+), 279 deletions(-) create mode 100644 arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts copy arch/arm64/boot/dts/arm/{foundation-v8.dts => foundation-v8.dtsi} (73%) -- 2.5.1