mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh@nvidia.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Jiang Liu <jiang.liu@linux.intel.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Thierry Reding <thierry.reding@gmail.com>
Cc: Kevin Hilman <khilman@kernel.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Linus Walleij <linus.walleij@linaro.org>,
	Soren Brinkmann <soren.brinkmann@xilinx.com>,
	linux-kernel@vger.kernel.org, <linux-tegra@vger.kernel.org>,
	Jon Hunter <jonathanh@nvidia.com>
Subject: [RFC PATCH V2 6/8] irqchip/gic: Assign irqchip dynamically
Date: Thu, 17 Dec 2015 10:48:27 +0000	[thread overview]
Message-ID: <1450349309-8107-7-git-send-email-jonathanh@nvidia.com> (raw)
In-Reply-To: <1450349309-8107-1-git-send-email-jonathanh@nvidia.com>

Dynamically assign the irqchip structure for each GIC controller
instance. This is necessary in order to populate the "dev" member
of the irqchip structure for GIC instances that require runtime
power management support. This also allows us to populate a unique
name for each GIC controller.

This is based upon a patch by Linus Walleij <linus.walleij@linaro.org>.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 drivers/irqchip/irq-gic.c | 41 +++++++++++++++--------------------------
 1 file changed, 15 insertions(+), 26 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 5d1f1d4396c2..ebfbb2379320 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -69,6 +69,7 @@ union gic_base {
 };
 
 struct gic_chip_data {
+	struct irq_chip chip;
 	union gic_base dist_base;
 	union gic_base cpu_base;
 #ifdef CONFIG_CPU_PM
@@ -383,7 +384,6 @@ static void gic_handle_cascade_irq(struct irq_desc *desc)
 }
 
 static struct irq_chip gic_chip = {
-	.name			= "GIC",
 	.irq_mask		= gic_mask_irq,
 	.irq_unmask		= gic_unmask_irq,
 	.irq_eoi		= gic_eoi_irq,
@@ -398,23 +398,6 @@ static struct irq_chip gic_chip = {
 				  IRQCHIP_MASK_ON_SUSPEND,
 };
 
-static struct irq_chip gic_eoimode1_chip = {
-	.name			= "GICv2",
-	.irq_mask		= gic_eoimode1_mask_irq,
-	.irq_unmask		= gic_unmask_irq,
-	.irq_eoi		= gic_eoimode1_eoi_irq,
-	.irq_set_type		= gic_set_type,
-#ifdef CONFIG_SMP
-	.irq_set_affinity	= gic_set_affinity,
-#endif
-	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
-	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
-	.irq_set_vcpu_affinity	= gic_irq_set_vcpu_affinity,
-	.flags			= IRQCHIP_SET_TYPE_MASKED |
-				  IRQCHIP_SKIP_SET_WAKE |
-				  IRQCHIP_MASK_ON_SUSPEND,
-};
-
 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 {
 	if (gic_nr >= MAX_GIC_NR)
@@ -925,20 +908,15 @@ void __init gic_init_physaddr(struct device_node *node)
 static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
 				irq_hw_number_t hw)
 {
-	struct irq_chip *chip = &gic_chip;
-
-	if (static_key_true(&supports_deactivate)) {
-		if (d->host_data == (void *)&gic_data[0])
-			chip = &gic_eoimode1_chip;
-	}
+	struct gic_chip_data *gic = d->host_data;
 
 	if (hw < 32) {
 		irq_set_percpu_devid(irq);
-		irq_domain_set_info(d, irq, hw, chip, d->host_data,
+		irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
 				    handle_percpu_devid_irq, NULL, NULL);
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 	} else {
-		irq_domain_set_info(d, irq, hw, chip, d->host_data,
+		irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
 				    handle_fasteoi_irq, NULL, NULL);
 		irq_set_probe(irq);
 	}
@@ -1046,6 +1024,15 @@ static int __init __gic_init_bases(unsigned int gic_nr, int irq_start,
 
 	gic = &gic_data[gic_nr];
 
+	gic->chip = gic_chip;
+	gic->chip.name = kasprintf(GFP_KERNEL, "GIC%d", gic_nr);
+
+	if (gic_nr == 0 && static_key_true(&supports_deactivate)) {
+		gic->chip.irq_mask = gic_eoimode1_mask_irq;
+		gic->chip.irq_eoi = gic_eoimode1_eoi_irq;
+		gic->chip.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity;
+	}
+
 	if (IS_ENABLED(CONFIG_GIC_NON_BANKED) && percpu_offset) {
 		/* Frankein-GIC without banked registers... */
 		unsigned int cpu;
@@ -1147,6 +1134,8 @@ static int __init __gic_init_bases(unsigned int gic_nr, int irq_start,
 	return 0;
 
 err:
+	kfree(gic->chip.name);
+
 	if (IS_ENABLED(CONFIG_GIC_NON_BANKED) && percpu_offset) {
 		free_percpu(gic->dist_base.percpu_base);
 		free_percpu(gic->cpu_base.percpu_base);
-- 
2.1.4


  parent reply	other threads:[~2015-12-17 10:51 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-17 10:48 [RFC PATCH V2 0/8] Add support for Tegra210 AGIC Jon Hunter
2015-12-17 10:48 ` [RFC PATCH V2 1/8] irqdomain: Ensure type settings match for an existing mapping Jon Hunter
2015-12-17 13:16   ` Linus Walleij
2015-12-18 10:10     ` Jon Hunter
2015-12-22  9:58       ` Linus Walleij
2015-12-22 10:00         ` Linus Walleij
2015-12-22 11:27           ` Jon Hunter
2015-12-22 11:31           ` Grygorii Strashko
2015-12-17 10:48 ` [RFC PATCH V2 2/8] irqdomain: Don't set type when mapping an IRQ Jon Hunter
2015-12-17 12:18   ` Linus Walleij
2015-12-22 11:18   ` Grygorii Strashko
2015-12-22 11:56     ` Jon Hunter
2016-03-18  9:16       ` Geert Uytterhoeven
2015-12-17 10:48 ` [RFC PATCH V2 3/8] genirq: Add runtime power management support for IRQ chips Jon Hunter
2015-12-17 13:19   ` Linus Walleij
2015-12-18 10:20     ` Jon Hunter
2016-01-12 18:40   ` Grygorii Strashko
2016-01-12 21:43     ` Sören Brinkmann
2016-01-18 14:47   ` Ulf Hansson
2016-01-19 10:43     ` Jon Hunter
2016-01-20 15:30       ` Thomas Gleixner
2016-01-21  8:38         ` Jon Hunter
2016-01-21 12:40         ` Ulf Hansson
2016-01-21 19:51           ` Thomas Gleixner
2016-01-22 11:08             ` Ulf Hansson
2016-01-26 17:17               ` Thomas Gleixner
2016-02-05 14:37             ` Linus Walleij
2016-03-18 13:57               ` Grygorii Strashko
2015-12-17 10:48 ` [RFC PATCH V2 4/8] irqchip/gic: Don't initialise chip if mapping IO space fails Jon Hunter
2015-12-17 13:21   ` Linus Walleij
2015-12-17 10:48 ` [RFC PATCH V2 5/8] irqchip/gic: Return an error if GIC initialisation fails Jon Hunter
2015-12-17 13:26   ` Linus Walleij
2015-12-18 10:24     ` Jon Hunter
2015-12-17 10:48 ` Jon Hunter [this message]
2015-12-17 11:00   ` [RFC PATCH V2 6/8] irqchip/gic: Assign irqchip dynamically Marc Zyngier
2015-12-18 10:26     ` Jon Hunter
2015-12-17 10:48 ` [RFC PATCH V2 7/8] irqchip/gic: Prepare for adding platform driver Jon Hunter
2015-12-17 10:48 ` [RFC PATCH V2 8/8] irqchip/gic: Add support for tegra AGIC interrupt controller Jon Hunter
2015-12-17 10:58   ` Jon Hunter
2015-12-17 13:32   ` Linus Walleij
2015-12-18 10:44     ` Jon Hunter
2015-12-22 10:03       ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450349309-8107-7-git-send-email-jonathanh@nvidia.com \
    --to=jonathanh@nvidia.com \
    --cc=geert@linux-m68k.org \
    --cc=grygorii.strashko@ti.com \
    --cc=jason@lakedaemon.net \
    --cc=jiang.liu@linux.intel.com \
    --cc=khilman@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=soren.brinkmann@xilinx.com \
    --cc=swarren@wwwdotorg.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome