From: MaJun <majun258@huawei.com>
To: <Catalin.Marinas@arm.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <Will.Deacon@arm.com>,
<mark.rutland@arm.com>, <marc.zyngier@arm.com>,
<jason@lakedaemon.net>, <tglx@linutronix.de>,
<lizefan@huawei.com>, <huxinwei@huawei.com>,
<dingtianhong@huawei.com>, <zhaojunhua@hisilicon.com>,
<liguozhu@hisilicon.com>, <xuwei5@hisilicon.com>,
<wei.chenwei@hisilicon.com>, <guohanjun@huawei.com>,
<wuyun.wu@huawei.com>, <guodong.xu@linaro.org>,
<haojian.zhuang@linaro.org>, <zhangfei.gao@linaro.org>,
<usman.ahmad@linaro.org>, <klimov.linux@gmail.com>,
<gabriele.paoloni@huawei.com>, <majun258@huawei.com>
Subject: [PATCH v10 4/4] irqchip:implement the mbigen irq chip operation functions
Date: Thu, 17 Dec 2015 19:56:37 +0800 [thread overview]
Message-ID: <1450353397-47668-5-git-send-email-majun258@huawei.com> (raw)
In-Reply-To: <1450353397-47668-1-git-send-email-majun258@huawei.com>
From: Ma Jun <majun258@huawei.com>
Add the interrupt controller chip operation functions of mbigen chip.
Signed-off-by: Ma Jun <majun258@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 81 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 81 insertions(+), 0 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 98865b1..a6856f2 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -50,6 +50,20 @@
#define REG_MBIGEN_VEC_OFFSET 0x200
/**
+ * offset of clear register in mbigen node
+ * This register is used to clear the status
+ * of interrupt
+ */
+#define REG_MBIGEN_CLEAR_OFFSET 0xa000
+
+/**
+ * offset of interrupt type register
+ * This register is used to configure interrupt
+ * trigger type
+ */
+#define REG_MBIGEN_TYPE_OFFSET 0x0
+
+/**
* struct mbigen_device - holds the information of mbigen device.
*
* @pdev: pointer to the platform device structure of mbigen chip.
@@ -72,8 +86,75 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
+ REG_MBIGEN_VEC_OFFSET;
}
+static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
+ u32 *mask, u32 *addr)
+{
+ unsigned int nid, irq_ofst, ofst;
+
+ hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
+ nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
+ irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
+
+ *mask = 1 << (irq_ofst % 32);
+ ofst = irq_ofst / 32 * 4;
+
+ *addr = ofst + nid * MBIGEN_NODE_OFFSET
+ + REG_MBIGEN_TYPE_OFFSET;
+}
+
+static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
+ u32 *mask, u32 *addr)
+{
+ unsigned int ofst;
+
+ hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
+ ofst = hwirq / 32 * 4;
+
+ *mask = 1 << (hwirq % 32);
+ *addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
+}
+
+static void mbigen_eoi_irq(struct irq_data *data)
+{
+ void __iomem *base = data->chip_data;
+ u32 mask, addr;
+
+ get_mbigen_clear_reg(data->hwirq, &mask, &addr);
+
+ writel_relaxed(mask, base + addr);
+
+ irq_chip_eoi_parent(data);
+}
+
+static int mbigen_set_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *base = data->chip_data;
+ u32 mask, addr, val;
+
+ if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+ return -EINVAL;
+
+ get_mbigen_type_reg(data->hwirq, &mask, &addr);
+
+ val = readl_relaxed(base + addr);
+
+ if (type == IRQ_TYPE_LEVEL_HIGH)
+ val |= mask;
+ else
+ val &= ~mask;
+
+ writel_relaxed(val, base + addr);
+
+ return 0;
+}
+
static struct irq_chip mbigen_irq_chip = {
.name = "mbigen-v2",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_eoi = mbigen_eoi_irq,
+ .irq_set_type = mbigen_set_type,
+ .irq_set_affinity = irq_chip_set_affinity_parent,
};
static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
--
1.7.1
next prev parent reply other threads:[~2015-12-17 12:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 11:56 [PATCH v10 0/4] irqchip:support mbigen interrupt controller MaJun
2015-12-17 11:56 ` [PATCH v10 1/4] dt-binding:Documents of the mbigen bindings MaJun
2015-12-17 13:52 ` Mark Rutland
2015-12-18 1:58 ` majun (F)
2015-12-18 10:58 ` Mark Rutland
2015-12-18 11:26 ` Marc Zyngier
2015-12-18 11:35 ` Marc Zyngier
2015-12-18 11:54 ` Mark Rutland
2015-12-17 11:56 ` [PATCH v10 2/4] irqchip: add platform device driver for mbigen device MaJun
2015-12-17 11:56 ` [PATCH v10 3/4] irqchip:create irq domain for each " MaJun
2015-12-17 16:02 ` Marc Zyngier
2015-12-18 11:02 ` Mark Rutland
2015-12-18 11:27 ` Marc Zyngier
2015-12-17 11:56 ` MaJun [this message]
2015-12-17 16:03 ` [PATCH v10 4/4] irqchip:implement the mbigen irq chip operation functions Marc Zyngier
2015-12-17 16:06 ` [PATCH v10 0/4] irqchip:support mbigen interrupt controller Marc Zyngier
2015-12-18 11:58 ` Marc Zyngier
2015-12-18 12:27 ` Hanjun Guo
2015-12-18 14:03 ` majun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450353397-47668-5-git-send-email-majun258@huawei.com \
--to=majun258@huawei.com \
--cc=Catalin.Marinas@arm.com \
--cc=Will.Deacon@arm.com \
--cc=dingtianhong@huawei.com \
--cc=gabriele.paoloni@huawei.com \
--cc=guodong.xu@linaro.org \
--cc=guohanjun@huawei.com \
--cc=haojian.zhuang@linaro.org \
--cc=huxinwei@huawei.com \
--cc=jason@lakedaemon.net \
--cc=klimov.linux@gmail.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=tglx@linutronix.de \
--cc=usman.ahmad@linaro.org \
--cc=wei.chenwei@hisilicon.com \
--cc=wuyun.wu@huawei.com \
--cc=xuwei5@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhaojunhua@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®