From: Stefan Agner <stefan@agner.ch>
To: airlied@linux.ie, daniel.vetter@ffwll.ch, jianwei.wang.chn@gmail.com
Cc: alison.wang@freescale.com, mark.yao@rock-chips.com,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Stefan Agner <stefan@agner.ch>
Subject: [PATCH 0/4] drm/fsl-dcu: add TCON and Vybrid support
Date: Thu, 17 Dec 2015 23:43:24 -0800 [thread overview]
Message-ID: <1450424608-4082-1-git-send-email-stefan@agner.ch> (raw)
This patchset adds the missing pieces to make the Freescale
DCU DRM driver work on Freescale Vybrid.
Foremost, it adds support for the timing controller (TCON)
module. The module is between the Display Controller and the
actual output pins. It allows to alter the timings for RAW
TFT displays, but can also operate in a bypass mode. This
change has only support for the bypass mode.
Earlier variants of the DCU DRM driver configured the TCON
module in bypass mode, however this has been removed and
postponed. The last variant with the TCON code was v9:
https://lkml.org/lkml/2015/7/13/242
This change is an attempt to implement a proper driver.
Ideas have been taken from the sun4i Tcon driver:
https://lkml.org/lkml/2015/10/30/369
The patchset depends on my fsl-dcu fixes patchset:
https://lkml.org/lkml/2015/11/18/953
Stefan Agner (4):
ARM: dts: vf610: add display nodes
ARM: dts: vf610-colibri: enable display controller
ARM: clk: vf610: add TCON ipg clock
drm/fsl-dcu: add TCON driver
.../devicetree/bindings/display/fsl,dcu.txt | 4 +
.../devicetree/bindings/display/fsl,tcon.txt | 18 +++
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 16 +++
arch/arm/boot/dts/vf-colibri.dtsi | 33 +++++
arch/arm/boot/dts/vfxxx.dtsi | 18 +++
drivers/clk/imx/clk-vf610.c | 3 +
drivers/gpu/drm/fsl-dcu/Makefile | 3 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 6 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 1 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 11 ++
drivers/gpu/drm/fsl-dcu/fsl_tcon.c | 134 +++++++++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_tcon.h | 37 ++++++
include/dt-bindings/clock/vf610-clock.h | 4 +-
13 files changed, 286 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/fsl,tcon.txt
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.c
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.h
--
2.6.4
next reply other threads:[~2015-12-18 7:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-18 7:43 Stefan Agner [this message]
2015-12-18 7:43 ` [PATCH 1/4] ARM: dts: vf610: add display nodes Stefan Agner
2015-12-18 7:43 ` [PATCH 2/4] ARM: dts: vf610-colibri: enable display controller Stefan Agner
2015-12-18 7:43 ` [PATCH 3/4] ARM: clk: vf610: add TCON ipg clock Stefan Agner
2015-12-18 7:43 ` [PATCH 4/4] drm/fsl-dcu: add TCON driver Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450424608-4082-1-git-send-email-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=airlied@linux.ie \
--cc=alison.wang@freescale.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jianwei.wang.chn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.yao@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®