From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933548AbbLRHnn (ORCPT ); Fri, 18 Dec 2015 02:43:43 -0500 Received: from mail.kmu-office.ch ([178.209.48.109]:34461 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752426AbbLRHmm (ORCPT ); Fri, 18 Dec 2015 02:42:42 -0500 From: Stefan Agner To: airlied@linux.ie, daniel.vetter@ffwll.ch, jianwei.wang.chn@gmail.com Cc: alison.wang@freescale.com, mark.yao@rock-chips.com, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH 1/4] ARM: dts: vf610: add display nodes Date: Thu, 17 Dec 2015 23:43:25 -0800 Message-Id: <1450424608-4082-2-git-send-email-stefan@agner.ch> X-Mailer: git-send-email 2.6.4 In-Reply-To: <1450424608-4082-1-git-send-email-stefan@agner.ch> References: <1450424608-4082-1-git-send-email-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the dcu and tcon nodes to enable the Display Controller Unit and Timing Controller in Vybrid's SoC level device-tree file. Signed-off-by: Stefan Agner --- arch/arm/boot/dts/vfxxx.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6736bae..8972c1c 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -232,6 +232,14 @@ <20000000>; }; + tcon0: timing-controller@4003d000 { + compatible = "fsl,vf610-tcon"; + reg = <0x4003d000 0x1000>; + clocks = <&clks VF610_CLK_TCON0>; + clock-names = "ipg"; + status = "disabled"; + }; + wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; @@ -337,6 +345,16 @@ status = "disabled"; }; + dcu0: dcu@40058000 { + compatible = "fsl,vf610-dcu"; + reg = <0x40058000 0x1200>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DCU0>; + clock-names = "dcu"; + fsl,tcon = <&tcon0>; + status = "disabled"; + }; + i2c0: i2c@40066000 { #address-cells = <1>; #size-cells = <0>; -- 2.6.4