From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754778AbbLVKq6 (ORCPT ); Tue, 22 Dec 2015 05:46:58 -0500 Received: from arroyo.ext.ti.com ([192.94.94.40]:41575 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754149AbbLVKjK (ORCPT ); Tue, 22 Dec 2015 05:39:10 -0500 From: Kishon Vijay Abraham I To: CC: Subject: [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Date: Tue, 22 Dec 2015 16:08:38 +0530 Message-ID: <1450780741-2237-6-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1450780741-2237-1-git-send-email-kishon@ti.com> References: <1450780741-2237-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Chunfeng Yun when use the default value 8 of RG_USB20_SQTH, the HS receiver sensitivity test of HQA will fail, set it as 2 to fix up the issue. Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-mt65xx-usb3.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c index e427c3b..2afbf9f3 100644 --- a/drivers/phy/phy-mt65xx-usb3.c +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -49,6 +49,8 @@ #define PA6_RG_U2_ISO_EN BIT(31) #define PA6_RG_U2_BC11_SW_EN BIT(23) #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) +#define PA6_RG_U2_SQTH GENMASK(3, 0) +#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x)) #define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020) #define P2C_RG_USB20_GPIO_CTL BIT(9) @@ -165,9 +167,10 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy, writel(tmp, port_base + U3P_U2PHYDTM0); } - /* DP/DM BC1.1 path Disable */ tmp = readl(port_base + U3P_USBPHYACR6); - tmp &= ~PA6_RG_U2_BC11_SW_EN; + tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */ + tmp &= ~PA6_RG_U2_SQTH; + tmp |= PA6_RG_U2_SQTH_VAL(2); writel(tmp, port_base + U3P_USBPHYACR6); tmp = readl(port_base + U3P_U3PHYA_DA_REG0); -- 1.7.9.5