From: Noam Camus <noamc@ezchip.com>
To: <linux-snps-arc@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>, <cmetcalf@ezchip.com>,
<daniel.lezcano@linaro.org>, <marc.zyngier@arm.com>,
Noam Camus <noamc@ezchip.com>
Subject: [PATCH v5 14/20] ARC: [plat-eznps] Use dedicated user stack top
Date: Sun, 27 Dec 2015 15:23:33 +0200 [thread overview]
Message-ID: <1451222619-3610-15-git-send-email-noamc@ezchip.com> (raw)
In-Reply-To: <1451222619-3610-1-git-send-email-noamc@ezchip.com>
From: Noam Camus <noamc@ezchip.com>
NPS use special mapping right below TASK_SIZE.
Hence we need to lower STACK_TOP so that user stack won't
overlap NPS special mapping.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/processor.h | 17 +++++++++++++++++
arch/arc/mm/tlb.c | 6 ++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 8a77ccd..41142ab 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -122,7 +122,24 @@ extern unsigned int get_wchan(struct task_struct *p);
#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+/* NPS architecture defines special window of 129M in user address space for
+ * special memory areas, when accessing this window the MMU do not use TLB.
+ * Instead MMU direct the access to:
+ * 0x57f00000:0x57ffffff -- 1M of closely coupled memory (aka CMEM)
+ * 0x58000000:0x5fffffff -- 16 huge pages, 8M each, with fixed map (aka FMTs)
+ *
+ * CMEM - is the fastest memory we got and its size is 16K.
+ * FMT - is used to map either to internal/external memory.
+ * Internal memory is the second fast memory and its size is 16M
+ * External memory is the biggest memory (16G) and also the slowest.
+ *
+ * STACK_TOP need to be PMD align (21bit) that is why we supply 0x57e00000.
+ */
+#define STACK_TOP 0x57e00000
+#else /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP TASK_SIZE
+#endif /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 843e1a5..01f85e5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -820,6 +820,12 @@ void arc_mmu_init(void)
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_VMALLOC_SIZE << 20), PMD_SIZE));
+ /*
+ * stack top size sanity check,
+ * Can't be done in processor.h due to header include depenedencies
+ */
+ BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
+
/* For efficiency sake, kernel is compile time built for a MMU ver
* This must match the hardware it is running on.
* Linux built for MMU V2, if run on MMU V1 will break down because V1
--
1.7.1
next prev parent reply other threads:[~2015-12-27 13:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-27 13:23 [PATCH v5 00/20] Adding plat-eznps to ARC Noam Camus
2015-12-27 13:23 ` [PATCH v5 01/20] Documentation: Add EZchip vendor to binding list Noam Camus
2015-12-27 13:23 ` [PATCH v5 02/20] soc: Support for EZchip SoC Noam Camus
2015-12-27 13:23 ` [PATCH v5 03/20] ARC: [plat-eznps] define IPI_IRQ Noam Camus
2015-12-27 13:23 ` [PATCH v5 04/20] clocksource: Add NPS400 timers driver Noam Camus
2015-12-27 14:55 ` kbuild test robot
2015-12-27 21:41 ` Noam Camus
2015-12-28 9:00 ` Daniel Lezcano
2015-12-28 10:35 ` Vineet Gupta
2015-12-28 10:55 ` Daniel Lezcano
2015-12-28 11:11 ` Vineet Gupta
2016-01-01 10:31 ` Vineet Gupta
2015-12-27 13:23 ` [PATCH v5 05/20] irqchip: add nps Internal and external irqchips Noam Camus
2015-12-30 10:08 ` Vineet Gupta
2015-12-30 10:41 ` Vineet Gupta
2015-12-27 13:23 ` [PATCH v5 06/20] ARC: Set vmalloc size from configuration Noam Camus
2015-12-27 13:23 ` [PATCH v5 07/20] ARC: rwlock: disable interrupts in !LLSC variant Noam Camus
2015-12-27 13:23 ` [PATCH v5 08/20] ARC: Mark secondary cpu online only after all HW setup is done Noam Camus
2015-12-27 13:23 ` [PATCH v5 09/20] ARC: IRQ: use device tree to get timer device configuration Noam Camus
2015-12-28 11:42 ` Vineet Gupta
2015-12-30 11:20 ` Vineet Gupta
2015-12-27 13:23 ` [PATCH v5 10/20] ARC: IRQ: do not use hwirq directly at arch_do_IRQ() Noam Camus
2015-12-30 10:10 ` Vineet Gupta
2015-12-31 5:21 ` Noam Camus
2015-12-27 13:23 ` [PATCH v5 11/20] ARC: IPI: do not use generic IRQ domain Noam Camus
2015-12-30 10:13 ` Vineet Gupta
2015-12-31 5:14 ` Noam Camus
2015-12-27 13:23 ` [PATCH v5 12/20] ARC: [plat-eznps] Add eznps board defconfig and dts Noam Camus
2015-12-27 13:23 ` [PATCH v5 13/20] ARC: [plat-eznps] Add eznps platform Noam Camus
2015-12-27 13:23 ` Noam Camus [this message]
2015-12-27 13:23 ` [PATCH v5 15/20] ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg Noam Camus
2015-12-27 13:23 ` [PATCH v5 16/20] ARC: [plat-eznps] Use dedicated SMP barriers Noam Camus
2015-12-27 13:23 ` [PATCH v5 17/20] ARC: [plat-eznps] Use dedicated identity auxiliary register Noam Camus
2015-12-27 13:23 ` [PATCH v5 18/20] ARC: [plat-eznps] Use dedicated cpu_relax() Noam Camus
2015-12-27 13:23 ` [PATCH v5 19/20] ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE Noam Camus
2015-12-27 13:23 ` [PATCH v5 20/20] ARC: Add eznps platform to Kconfig and Makefile Noam Camus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451222619-3610-15-git-send-email-noamc@ezchip.com \
--to=noamc@ezchip.com \
--cc=cmetcalf@ezchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=marc.zyngier@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®