mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Milo Kim <milo.kim@ti.com>
To: <tglx@linutronix.de>
Cc: <jason@lakedaemon.net>, <marc.zyngier@arm.com>,
	<alexandre.belloni@free-electrons.com>,
	<boris.brezillon@free-electrons.com>,
	<ludovic.desroches@atmel.com>, <nicolas.ferre@atmel.com>,
	<linux-kernel@vger.kernel.org>, Milo Kim <milo.kim@ti.com>
Subject: [PATCH 10/19] irqchip: atmel-aic: add common set_type function
Date: Mon, 4 Jan 2016 13:28:34 +0900	[thread overview]
Message-ID: <1451881723-2478-11-git-send-email-milo.kim@ti.com> (raw)
In-Reply-To: <1451881723-2478-1-git-send-email-milo.kim@ti.com>

set_type() operation updates IRQ flag for selected IRQ.
By using aic_update_smr(), this operation can be unified.

Common set_type() handles interrupt type as below.
  1. Set register value corresponding to IRQ type.
  2. If SSR is used, write hwirq into SSR for IRQ selection
  3. Read value of SMR
  4. Update IRQ type into SMR

aic_update_smr() handles step 2, 3 and 4.

Please note that there are two helpers for getting IRQ chip generic data.
One is irq_data_get_irq_chip_data(d) named 'gc'.
The other is irq_get_domain_generic_chip(domain, 0) called 'bgc'.
'gc' is used for getting external IRQ configuration which is specified in
chip private data, 'aic'. Low level IRQ/falling IRQ detection is only
valid for external interrupts. So 'aic->ext_irqs' should be checked.
'bgc' is used for general operations like lock/unlocking IRQ data and
accessing AIC/AIC5 registers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
---
 drivers/irqchip/irq-atmel-aic-common.c | 20 ++++++++++++--------
 drivers/irqchip/irq-atmel-aic-common.h |  2 --
 drivers/irqchip/irq-atmel-aic.c        | 17 -----------------
 drivers/irqchip/irq-atmel-aic5.c       | 19 -------------------
 4 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/drivers/irqchip/irq-atmel-aic-common.c b/drivers/irqchip/irq-atmel-aic-common.c
index ec93725..4c404f9 100644
--- a/drivers/irqchip/irq-atmel-aic-common.c
+++ b/drivers/irqchip/irq-atmel-aic-common.c
@@ -263,37 +263,40 @@ static int aic_retrigger(struct irq_data *d)
 	return 0;
 }
 
-int aic_common_set_type(struct irq_data *d, unsigned type, unsigned *val)
+static int aic_set_type(struct irq_data *d, unsigned int type)
 {
+	struct irq_domain *domain = d->domain;
+	struct irq_chip_generic *bgc = irq_get_domain_generic_chip(domain, 0);
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct aic_chip_data *aic = gc->private;
-	unsigned aic_type;
+	u32 val;
 
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
-		aic_type = AT91_AIC_SRCTYPE_HIGH;
+		val = AT91_AIC_SRCTYPE_HIGH;
 		break;
 	case IRQ_TYPE_EDGE_RISING:
-		aic_type = AT91_AIC_SRCTYPE_RISING;
+		val = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		if (!(d->mask & aic->ext_irqs))
 			return -EINVAL;
 
-		aic_type = AT91_AIC_SRCTYPE_LOW;
+		val = AT91_AIC_SRCTYPE_LOW;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		if (!(d->mask & aic->ext_irqs))
 			return -EINVAL;
 
-		aic_type = AT91_AIC_SRCTYPE_FALLING;
+		val = AT91_AIC_SRCTYPE_FALLING;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	*val &= ~AT91_AIC_SRCTYPE;
-	*val |= aic_type;
+	irq_gc_lock(bgc);
+	aic_update_smr(bgc, d->hwirq, ~AT91_AIC_SRCTYPE, val);
+	irq_gc_unlock(bgc);
 
 	return 0;
 }
@@ -376,6 +379,7 @@ struct irq_domain *__init aic_common_of_init(struct device_node *node,
 		gc->chip_types[0].chip.irq_mask = aic_mask;
 		gc->chip_types[0].chip.irq_unmask = aic_unmask;
 		gc->chip_types[0].chip.irq_retrigger = aic_retrigger;
+		gc->chip_types[0].chip.irq_set_type = aic_set_type;
 		gc->private = &aic[i];
 	}
 
diff --git a/drivers/irqchip/irq-atmel-aic-common.h b/drivers/irqchip/irq-atmel-aic-common.h
index e068349..bf721b8 100644
--- a/drivers/irqchip/irq-atmel-aic-common.h
+++ b/drivers/irqchip/irq-atmel-aic-common.h
@@ -18,8 +18,6 @@
 
 #define AIC_IRQS_PER_CHIP	32
 
-int aic_common_set_type(struct irq_data *d, unsigned type, unsigned *val);
-
 struct irq_domain *__init aic_common_of_init(struct device_node *node,
 					     const char *name, int nirqs);
 
diff --git a/drivers/irqchip/irq-atmel-aic.c b/drivers/irqchip/irq-atmel-aic.c
index c218716..9166733 100644
--- a/drivers/irqchip/irq-atmel-aic.c
+++ b/drivers/irqchip/irq-atmel-aic.c
@@ -74,22 +74,6 @@ aic_handle(struct pt_regs *regs)
 		handle_domain_irq(aic_domain, irqnr, regs);
 }
 
-static int aic_set_type(struct irq_data *d, unsigned type)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	unsigned int smr;
-	int ret;
-
-	smr = irq_reg_readl(gc, AT91_AIC_SMR(d->hwirq));
-	ret = aic_common_set_type(d, type, &smr);
-	if (ret)
-		return ret;
-
-	irq_reg_writel(gc, smr, AT91_AIC_SMR(d->hwirq));
-
-	return 0;
-}
-
 #ifdef CONFIG_PM
 static void aic_suspend(struct irq_data *d)
 {
@@ -173,7 +157,6 @@ static int __init aic_of_init(struct device_node *node,
 	gc = irq_get_domain_generic_chip(domain, 0);
 
 	gc->chip_types[0].regs.eoi = AT91_AIC_EOICR;
-	gc->chip_types[0].chip.irq_set_type = aic_set_type;
 	gc->chip_types[0].chip.irq_suspend = aic_suspend;
 	gc->chip_types[0].chip.irq_resume = aic_resume;
 	gc->chip_types[0].chip.irq_pm_shutdown = aic_pm_shutdown;
diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
index 49d40b4..972eba7 100644
--- a/drivers/irqchip/irq-atmel-aic5.c
+++ b/drivers/irqchip/irq-atmel-aic5.c
@@ -83,24 +83,6 @@ aic5_handle(struct pt_regs *regs)
 		handle_domain_irq(aic5_domain, irqnr, regs);
 }
 
-static int aic5_set_type(struct irq_data *d, unsigned type)
-{
-	struct irq_domain *domain = d->domain;
-	struct irq_chip_generic *bgc = irq_get_domain_generic_chip(domain, 0);
-	unsigned int smr;
-	int ret;
-
-	irq_gc_lock(bgc);
-	irq_reg_writel(bgc, d->hwirq, AT91_AIC5_SSR);
-	smr = irq_reg_readl(bgc, AT91_AIC5_SMR);
-	ret = aic_common_set_type(d, type, &smr);
-	if (!ret)
-		irq_reg_writel(bgc, smr, AT91_AIC5_SMR);
-	irq_gc_unlock(bgc);
-
-	return ret;
-}
-
 #ifdef CONFIG_PM
 static void aic5_suspend(struct irq_data *d)
 {
@@ -225,7 +207,6 @@ static int __init aic5_of_init(struct device_node *node,
 		gc = irq_get_domain_generic_chip(domain, i * AIC_IRQS_PER_CHIP);
 
 		gc->chip_types[0].regs.eoi = AT91_AIC5_EOICR;
-		gc->chip_types[0].chip.irq_set_type = aic5_set_type;
 		gc->chip_types[0].chip.irq_suspend = aic5_suspend;
 		gc->chip_types[0].chip.irq_resume = aic5_resume;
 		gc->chip_types[0].chip.irq_pm_shutdown = aic5_pm_shutdown;
-- 
2.6.4


  parent reply	other threads:[~2016-01-04  4:31 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-04  4:28 [PATCH 00/19] irqchip: atmel-aic: make unified AIC driver Milo Kim
2016-01-04  4:28 ` [PATCH 01/19] irqchip: atmel-aic: fix wrong bit operation for IRQ priority Milo Kim
2016-01-04  8:11   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 02/19] irqchip: atmel-aic: clean up RTC interrupt code Milo Kim
2016-01-04  8:16   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 03/19] irqchip: atmel-aic: clean up RTT " Milo Kim
2016-01-04  8:17   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 04/19] irqchip: atmel-aic: replace magic numbers with named constant Milo Kim
2016-01-04  8:29   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 05/19] irqchip: atmel-aic: use simple constant to get number of interrupts per chip Milo Kim
2016-01-04  8:33   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 06/19] irqchip: atmel-aic: introduce register data structure Milo Kim
2016-01-04  8:53   ` Boris Brezillon
2016-01-06  8:30     ` Milo Kim
2016-01-04  4:28 ` [PATCH 07/19] irqchip: atmel-aic: make common IRQ domain translate function Milo Kim
2016-01-04  4:28 ` [PATCH 08/19] irqchip: atmel-aic: add common mask and unmask functions Milo Kim
2016-01-04  8:48   ` Boris Brezillon
2016-01-04  4:28 ` [PATCH 09/19] irqchip: atmel-aic: add common retrigger function Milo Kim
2016-01-04  4:28 ` Milo Kim [this message]
2016-01-04  4:28 ` [PATCH 11/19] irqchip: atmel-aic: add common PM IRQ chip operation Milo Kim
2016-01-04  4:28 ` [PATCH 12/19] irqchip: atmel-aic: use EOI register data in aic_reg_data Milo Kim
2016-01-04  4:28 ` [PATCH 13/19] irqchip: atmel-aic: clean up irq_chip_generic Milo Kim
2016-01-04  4:28 ` [PATCH 14/19] irqchip: atmel-aic: add common HW init function Milo Kim
2016-01-04  4:28 ` [PATCH 15/19] irqchip: atmel-aic: add common interrupt handler Milo Kim
2016-01-04  4:28 ` [PATCH 16/19] irqchip: atmel-aic: get total number of IRQs from device node Milo Kim
2016-01-04  4:28 ` [PATCH 17/19] irqchip: atmel-aic: use unified IRQ chip initialization function Milo Kim
2016-01-04  4:28 ` [PATCH 18/19] irqchip: atmel-aic: use unified AIC driver Milo Kim
2016-01-04  4:28 ` [PATCH 19/19] irqchip: atmel-aic: rename AIC driver and fix Kconfig Milo Kim
2016-01-04  9:02 ` [PATCH 00/19] irqchip: atmel-aic: make unified AIC driver Boris Brezillon
2016-01-04  9:37   ` Nicolas Ferre
2016-01-06  7:55     ` Milo Kim
2016-01-06  7:48   ` Milo Kim
2016-01-06  9:07     ` Boris Brezillon
2016-01-06 14:49       ` Jason Cooper
2016-01-07  7:48       ` Milo Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1451881723-2478-11-git-send-email-milo.kim@ti.com \
    --to=milo.kim@ti.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=marc.zyngier@arm.com \
    --cc=nicolas.ferre@atmel.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®