From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753729AbcAETsc (ORCPT ); Tue, 5 Jan 2016 14:48:32 -0500 Received: from youngberry.canonical.com ([91.189.89.112]:45195 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753435AbcAETry (ORCPT ); Tue, 5 Jan 2016 14:47:54 -0500 From: Kamal Mostafa To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Hartmut Knaack , Jonathan Cameron , Kamal Mostafa Subject: [PATCH 4.2.y-ckt 114/211] iio:magnetometer:bmc150_magn: sort entry alphabetically Date: Tue, 5 Jan 2016 11:43:42 -0800 Message-Id: <1452023119-25647-115-git-send-email-kamal@canonical.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1452023119-25647-1-git-send-email-kamal@canonical.com> References: <1452023119-25647-1-git-send-email-kamal@canonical.com> X-Extended-Stable: 4.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 4.2.8-ckt1 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Hartmut Knaack commit 2427d22de807b40f72175c8c9b1ff8a07275ad82 upstream. Sort the entry for bmc105_magn in Kconfig and Makefile to its correct position. Also add the minor module information for completeness. Fixes: c91746a2361d ("iio: magn: Add support for BMC150 magnetometer") Signed-off-by: Hartmut Knaack Signed-off-by: Jonathan Cameron Signed-off-by: Kamal Mostafa --- drivers/iio/magnetometer/Kconfig | 33 ++++++++++++++++++--------------- drivers/iio/magnetometer/Makefile | 3 +-- 2 files changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index efb9350..868abad 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -24,6 +24,24 @@ config AK09911 help Deprecated: AK09911 is now supported by AK8975 driver. +config BMC150_MAGN + tristate "Bosch BMC150 Magnetometer Driver" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the BMC150 magnetometer. + + Currently this only supports the device via an i2c interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + To compile this driver as a module, choose M here: the module will be + called bmc150_magn. + config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" depends on I2C @@ -87,19 +105,4 @@ config IIO_ST_MAGN_SPI_3AXIS depends on IIO_ST_MAGN_3AXIS depends on IIO_ST_SENSORS_SPI -config BMC150_MAGN - tristate "Bosch BMC150 Magnetometer Driver" - depends on I2C - select REGMAP_I2C - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to build support for the BMC150 magnetometer. - - Currently this only supports the device via an i2c interface. - - This is a combo module with both accelerometer and magnetometer. - This driver is only implementing magnetometer part, which has - its own address and register map. - endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 33b1d4d..2c72df4 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AK8975) += ak8975.o +obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o obj-$(CONFIG_MAG3110) += mag3110.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o obj-$(CONFIG_MMC35240) += mmc35240.o @@ -14,5 +15,3 @@ st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o - -obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o -- 1.9.1