From: Chris Zhong <zyw@rock-chips.com>
To: heiko@sntech.de, linux-rockchip@lists.infradead.org,
mark.yao@rock-chips.com, treding@nvidia.com
Cc: Chris Zhong <zyw@rock-chips.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
Kumar Gala <galak@codeaurora.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Herring <robh+dt@kernel.org>, David Airlie <airlied@linux.ie>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 0/5] Add mipi dsi support for rk3288
Date: Wed, 6 Jan 2016 12:03:52 +0800 [thread overview]
Message-ID: <1452053038-32098-1-git-send-email-zyw@rock-chips.com> (raw)
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM driver.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel chrome_v3.14, and it can display normally.
This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>
According to the suggestion from Thierry, I have get rid of the bridge,
and register the encoder & connecter in drm/rockchip/dw-mipi-dsi.c.
After backport below patches from linux-next, I can merge this serial into
Dave's drm-next branch.
94d5d6a0fbf3 clk: rockchip: add an id for rk3288 crypto clk
c6d49fbcfcc4 clk: rockchip: add id for mipidsi sclk on rk3288
a2f4c560f18e clk: rockchip: add mipidsi clock on rk3288
69c923743640 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
662513a14c9d ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846
b04061e6599b ARM: dts: rockchip: move the public part to rk3288-evb common
Changes in v7:
- modify the config to tristate for modules build (Mark Yao)
- Pass NULL 'name' to drm_encoder_init() to fix compile err (Mark Yao)
- Move the lcd_en control to act8846 dts
Changes in v6:
- update the document, since the bridge device has been deleted.
- move the mipi_en gate to ockchip_drm_crtc_mode_config
- Remove the atomic feature check (Mark Yao)
- Add atomic API support (Heiko Stübne)
- Do not use bridge driver (Thierry Reding)
- Optimization the phy init sequence
Changes in v5:
- modify the clk name to SCLK_MIPIDSI_24M
- add a blank line befor lcd_en
Changes in v4:
- use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3:
- move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Chris Zhong (5):
drm/rockchip: return a true clock rate to adjusted_mode
Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
drm: rockchip: Support Synopsys DW MIPI DSI
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
ARM: dts: rockchip: add support mipi panel tv080wum-nl0
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 60 +
arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +
arch/arm/boot/dts/rk3288-evb.dtsi | 12 +-
arch/arm/boot/dts/rk3288.dtsi | 39 +
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1196 ++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 +
8 files changed, 1327 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
--
2.6.3
next reply other threads:[~2016-01-06 4:04 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 4:03 Chris Zhong [this message]
2016-01-06 4:03 ` [PATCH v7 1/5] drm/rockchip: return a true clock rate to adjusted_mode Chris Zhong
2016-01-06 4:03 ` [PATCH v7 2/5] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver Chris Zhong
2016-01-06 4:03 ` [PATCH v7 3/5] drm: rockchip: Support Synopsys DW MIPI DSI Chris Zhong
2016-01-06 6:30 ` Mark yao
2016-01-06 7:12 ` [PATCH v7.1 " Chris Zhong
2016-01-06 8:12 ` [PATCH v7.2 " Chris Zhong
2016-01-06 4:03 ` [PATCH v7 4/5] ARM: dts: rockchip: add rk3288 mipi_dsi nodes Chris Zhong
2016-01-19 15:29 ` Heiko Stuebner
2016-01-20 0:50 ` Chris Zhong
2016-01-06 4:03 ` [PATCH v7 5/5] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 Chris Zhong
2016-01-19 19:26 ` Heiko Stuebner
2016-01-20 1:09 ` Chris Zhong
2016-01-20 22:25 ` Heiko Stuebner
2016-01-06 8:39 ` [PATCH v7 0/5] Add mipi dsi support for rk3288 Mark yao
2016-02-08 10:12 ` Archit Taneja
2016-02-08 10:52 ` Heiko Stuebner
2016-02-08 12:26 ` Archit Taneja
2016-02-24 9:38 ` Xinliang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452053038-32098-1-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mark.yao@rock-chips.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®