From: Laxman Dewangan <ldewangan@nvidia.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <linus.walleij@linaro.org>,
<gnurou@gmail.com>, <lee.jones@linaro.org>, <broonie@kernel.org>,
<a.zummo@towertech.it>, <alexandre.belloni@free-electrons.com>
Cc: <lgirdwood@gmail.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<rtc-linux@googlegroups.com>, <swarren@nvidia.com>,
<treding@nvidia.com>, <k.kozlowski@samsung.com>,
Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH V2 0/6] Add support for MAXIM MAX77620/MAX20024 PMIC
Date: Tue, 12 Jan 2016 14:47:47 +0530 [thread overview]
Message-ID: <1452590273-16421-1-git-send-email-ldewangan@nvidia.com> (raw)
Add SW support for MAXIM Semiconductor's Power Management
IC (PMIC) MAX77620/MAX20024. This PMIC supports DC-DC/LDOS, GPIOs,
RTC, watchdog, clocks etc.
This series add respective driver for each of sub-modules.
---
Changes from V1:
DT DOC:
- Added units in some of properties.
- Change the boolean property to tristate type and detail some of
properties.
RTC:
- Rename the file to rtc-max77xxx.c and make the generic implementation.
- Direct regmap apis are used for the register access.
- Decouped from max77620 driver.
- Taken care of cleanup comments form V1 version.
MFD:
- Code cleanups per review from V1.
- Move register acccess APIs from header to c file.
- Remove some of non required variable, remove duplication in error message
and simplify some of function implementation.
GPIO:
- Use the gpiochip_add_data and get the chip data from core APIs.
- Cleanups based on comment received on mfd/rtc.
- Avoid duplication on error message.
Pinctrl:
- Cleanup code based on comment received on mfd/rtc.
- Avoid duplication on error message.
Regulators:
- Cleanup code based on comment received on mfd/rtc.
- Avoid duplication on error message.
- Taken care of review comment from Mark.
Laxman Dewangan (6):
DT: mfd: add device-tree binding doc fro PMIC max77620/max20024
mfd: max77620: add core driver for MAX77620/MAX20024
pinctrl: max77620: add pincontrol driver for MAX77620/MAX20024
gpio: max77620: add gpio driver for MAX77620/MAX20024
rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP
regulator: max77620: add regulator driver for max77620/max20024
Documentation/devicetree/bindings/mfd/max77620.txt | 397 ++++++++
drivers/gpio/Kconfig | 9 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-max77620.c | 306 +++++++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max77620.c | 997 +++++++++++++++++++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-max77620.c | 705 +++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77620-regulator.c | 991 ++++++++++++++++++++
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max77xxx.c | 500 +++++++++++
include/dt-bindings/mfd/max77620.h | 38 +
include/linux/mfd/max77620.h | 407 +++++++++
18 files changed, 4399 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt
create mode 100644 drivers/gpio/gpio-max77620.c
create mode 100644 drivers/mfd/max77620.c
create mode 100644 drivers/pinctrl/pinctrl-max77620.c
create mode 100644 drivers/regulator/max77620-regulator.c
create mode 100644 drivers/rtc/rtc-max77xxx.c
create mode 100644 include/dt-bindings/mfd/max77620.h
create mode 100644 include/linux/mfd/max77620.h
--
2.1.4
next reply other threads:[~2016-01-12 9:33 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 9:17 Laxman Dewangan [this message]
2016-01-12 9:17 ` [PATCH V2 1/6] DT: mfd: add device-tree binding doc fro PMIC max77620/max20024 Laxman Dewangan
2016-01-13 2:07 ` Rob Herring
2016-01-12 9:17 ` [PATCH V2 2/6] mfd: max77620: add core driver for MAX77620/MAX20024 Laxman Dewangan
2016-01-13 0:47 ` Krzysztof Kozlowski
2016-01-13 9:00 ` Laxman Dewangan
2016-01-13 10:11 ` Alexandre Belloni
2016-01-12 9:17 ` [PATCH V2 3/6] pinctrl: max77620: add pincontrol " Laxman Dewangan
2016-01-12 9:17 ` [PATCH V2 4/6] gpio: max77620: add gpio " Laxman Dewangan
2016-01-12 9:17 ` [PATCH V2 5/6] rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP Laxman Dewangan
2016-01-13 0:06 ` Krzysztof Kozlowski
2016-01-13 4:07 ` Laxman Dewangan
2016-01-13 4:28 ` Krzysztof Kozlowski
2016-01-13 4:25 ` Laxman Dewangan
2016-01-13 14:59 ` Laxman Dewangan
2016-01-14 0:50 ` Krzysztof Kozlowski
2016-01-14 1:20 ` Krzysztof Kozlowski
2016-01-14 11:50 ` Laxman Dewangan
2016-01-15 1:50 ` Javier Martinez Canillas
2016-01-18 4:27 ` Krzysztof Kozlowski
2016-01-18 12:01 ` Laxman Dewangan
2016-01-18 12:52 ` Javier Martinez Canillas
2016-01-14 14:20 ` Mark Brown
2016-01-18 4:23 ` Krzysztof Kozlowski
2016-01-12 9:17 ` [PATCH V2 6/6] regulator: max77620: add regulator driver for max77620/max20024 Laxman Dewangan
2016-01-13 1:28 ` Krzysztof Kozlowski
2016-01-13 11:39 ` Laxman Dewangan
2016-01-13 11:57 ` Mark Brown
2016-01-13 12:05 ` Laxman Dewangan
2016-01-13 12:31 ` Mark Brown
2016-01-13 12:37 ` Laxman Dewangan
2016-01-13 13:09 ` Mark Brown
2016-01-13 13:11 ` Laxman Dewangan
2016-01-13 14:20 ` Mark Brown
2016-01-13 14:42 ` Laxman Dewangan
2016-01-13 15:51 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452590273-16421-1-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gnurou@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=swarren@nvidia.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®