From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1762131AbcALKW5 (ORCPT ); Tue, 12 Jan 2016 05:22:57 -0500 Received: from unicorn.mansr.com ([81.2.72.234]:57985 "EHLO unicorn.mansr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752245AbcALKWq (ORCPT ); Tue, 12 Jan 2016 05:22:46 -0500 From: Mans Rullgard To: Rob Herring , Tomi Valkeinen Cc: Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Jean-Christophe Plagniol-Villard , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org Subject: [RESEND PATCH 1/2] devicetree: mxsfb: add reset-active property Date: Tue, 12 Jan 2016 10:22:20 +0000 Message-Id: <1452594141-26073-1-git-send-email-mans@mansr.com> X-Mailer: git-send-email 2.7.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Some boards connect the LCD_RESET pin to a reset input on the display panel. On these boards, this pin must be set to the proper level for the display to function. This adds an optional "reset-active" property to the "display" subnode such that devicetrees can specify the desired polarity of the LCD_RESET pin. Signed-off-by: Mans Rullgard --- Documentation/devicetree/bindings/display/mxsfb.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt index 96ec5179c8a0..cb7212a6bdf2 100644 --- a/Documentation/devicetree/bindings/display/mxsfb.txt +++ b/Documentation/devicetree/bindings/display/mxsfb.txt @@ -13,6 +13,11 @@ Required properties: - bits-per-pixel : <16> for RGB565, <32> for RGB888/666. - bus-width : number of data lines. Could be <8>, <16>, <18> or <24>. +Optional properties: +- reset-active : <0>: reset pin is active low + <1>: reset pin is active high + omitted: reset pin not used + Required sub-node: - display-timings : Refer to binding doc display-timing.txt for details. -- 2.7.0