From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>,
Russell King <linux@arm.linux.org.uk>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: "Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCH 3/3] ARM: dts: imx6: add display timing for NL12880BC20 display to Ka-Ro electronics TX6 LVDS modules
Date: Tue, 12 Jan 2016 19:01:50 +0100 [thread overview]
Message-ID: <1452621710-15336-4-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1452621710-15336-3-git-send-email-LW@KARO-electronics.de>
Add support for the NLT Technologies WXGA LVDS display NL12880BC20 to
the TX6 LVDS modules from Ka-Ro electronics.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 42 ++++++++++++++++++++++++++++++----
arch/arm/boot/dts/imx6q-tx6q-1110.dts | 42 ++++++++++++++++++++++++++++++----
2 files changed, 76 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index c275eec..c14ee8f 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -104,8 +104,9 @@
status = "okay";
display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
+ native-mode = <&lvds0_timing0>;
+
+ lvds0_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
@@ -118,6 +119,22 @@
de-active = <1>;
pixelclk-active = <1>;
};
+
+ lvds0_timing1: nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hsync-len = <60>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vsync-len = <13>;
+ vfront-porch = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
};
};
@@ -127,8 +144,9 @@
status = "disabled";
display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
+ native-mode = <&lvds1_timing0>;
+
+ lvds1_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
@@ -141,6 +159,22 @@
de-active = <1>;
pixelclk-active = <1>;
};
+
+ lvds1_timing1: nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hsync-len = <60>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vsync-len = <13>;
+ vfront-porch = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 88aa1e4..7a8be02 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -104,8 +104,9 @@
status = "okay";
display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
+ native-mode = <&lvds0_timing0>;
+
+ lvds0_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
@@ -118,6 +119,22 @@
de-active = <1>;
pixelclk-active = <1>;
};
+
+ lvds0_timing1: nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hsync-len = <60>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vsync-len = <13>;
+ vfront-porch = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
};
};
@@ -127,8 +144,9 @@
status = "disabled";
display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
+ native-mode = <&lvds1_timing0>;
+
+ lvds1_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
@@ -141,6 +159,22 @@
de-active = <1>;
pixelclk-active = <1>;
};
+
+ lvds1_timing1: nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hsync-len = <60>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vsync-len = <13>;
+ vfront-porch = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
};
};
};
--
2.1.4
next prev parent reply other threads:[~2016-01-12 18:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 18:01 [PATCH 0/3] ARM: dts: imx6: add support for more i.MX6 modules from Ka-Ro electronics Lothar Waßmann
2016-01-12 18:01 ` [PATCH 1/3] ARM: dts: imx6: add support for Ka-Ro electronics TX6S-8034 module Lothar Waßmann
2016-01-12 18:01 ` [PATCH 2/3] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules Lothar Waßmann
2016-01-12 18:01 ` Lothar Waßmann [this message]
2016-01-12 18:43 ` Fabio Estevam
2016-01-13 11:36 ` Lothar Waßmann
2016-01-13 7:35 ` [PATCH 1/3] ARM: dts: imx6: add support for Ka-Ro electronics TX6S-8034 module Holger Schurig
2016-01-13 11:10 ` Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452621710-15336-4-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®