From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: "David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Lior Amsalem <alior@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Simon Guinot <simon.guinot@sequanux.org>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
Willy Tarreau <w@1wt.eu>, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH net-next 07/10] ARM: mvebu: enable buffer manager support on Armada XP boards
Date: Tue, 12 Jan 2016 20:10:31 +0100 [thread overview]
Message-ID: <1452625834-22166-8-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1452625834-22166-1-git-send-email-gregory.clement@free-electrons.com>
From: Marcin Wojtas <mw@semihalf.com>
Since mvneta driver supports using hardware buffer management (BM), in
order to use it, board files have to be adjusted accordingly. This commit
enables BM on AXP-DB and AXP-GP in same manner - because number of ports
on those boards is the same as number of possible pools, each port is
supposed to use single pool for all kind of packets.
Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
arch/arm/boot/dts/armada-xp-db.dts | 19 ++++++++++++++++++-
arch/arm/boot/dts/armada-xp-gp.dts | 19 ++++++++++++++++++-
2 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f774101416a5..30657302305d 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -77,7 +77,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -181,21 +182,33 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ };
+
+ bm@c0000 {
+ status = "okay";
};
mvsdio@d4000 {
@@ -230,5 +243,9 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 4878d7353069..a1ded01d0c07 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -96,7 +96,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -196,21 +197,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
};
/* Front-side USB slot */
@@ -235,6 +244,10 @@
};
};
+ bm@c0000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -243,5 +256,9 @@
nand-on-flash-bbt;
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
--
2.5.0
next prev parent reply other threads:[~2016-01-12 19:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 19:10 [PATCH net-next 00/10] Proposal for a API set for HW Buffer management Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 01/10] bus: mvebu-mbus: provide api for obtaining IO and DRAM window information Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 02/10] ARM: mvebu: enable SRAM support in mvebu_v7_defconfig Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 03/10] net: mvneta: bm: add support for hardware buffer management Gregory CLEMENT
2016-01-12 20:12 ` Marcin Wojtas
2016-01-13 17:38 ` Gregory CLEMENT
2016-02-12 18:04 ` Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 04/10] ARM: mvebu: add buffer manager nodes to armada-38x.dtsi Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 05/10] ARM: mvebu: enable buffer manager support on Armada 38x boards Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 06/10] ARM: mvebu: add buffer manager nodes to armada-xp.dtsi Gregory CLEMENT
2016-01-12 19:10 ` Gregory CLEMENT [this message]
2016-01-12 19:10 ` [PATCH net-next 08/10] bus: mvenus-mbus: Fix size test for mvebu_mbus_get_dram_win_info Gregory CLEMENT
2016-01-12 21:42 ` Marcin Wojtas
2016-01-14 14:00 ` David Laight
2016-02-16 16:18 ` Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 09/10] net: Add a hardware buffer management helper API Gregory CLEMENT
2016-01-27 20:02 ` Florian Fainelli
2016-01-29 18:36 ` Gregory CLEMENT
2016-01-12 19:10 ` [PATCH net-next 10/10] net: mvneta: Use the new hwbm framework Gregory CLEMENT
2016-01-12 22:40 ` Marcin Wojtas
2016-01-13 17:47 ` Gregory CLEMENT
2016-01-12 20:52 ` [PATCH net-next 00/10] Proposal for a API set for HW Buffer management David Miller
2016-01-13 17:36 ` Gregory CLEMENT
2016-01-13 19:53 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452625834-22166-8-git-send-email-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=boris.brezillon@free-electrons.com \
--cc=davem@davemloft.net \
--cc=ezequiel.garcia@free-electrons.com \
--cc=f.fainelli@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=maxime.ripard@free-electrons.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=simon.guinot@sequanux.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®