From: Shawn Lin <shawn.lin@rock-chips.com>
To: Jaehoon Chung <jh80.chung@samsung.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v2] mmc: dw_mmc: remove DW_MCI_QUIRK_BROKEN_CARD_DETECTION quirk
Date: Thu, 21 Jan 2016 14:52:52 +0800 [thread overview]
Message-ID: <1453359172-5977-1-git-send-email-shawn.lin@rock-chips.com> (raw)
dw_mmc already use mmc_of_parse to get "broken-cd" property,
but it considered "broken-cd" to be a quirk in its driver. We
don't need this quirk here, and just take what we need from
mmc->caps.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
Changes in v2:
- fix wrong using of cur_slot
drivers/mmc/host/dw_mmc.c | 35 ++++++++++-------------------------
include/linux/mmc/dw_mmc.h | 4 +---
2 files changed, 11 insertions(+), 28 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7128351..96f173b 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1450,12 +1450,11 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
{
int present;
struct dw_mci_slot *slot = mmc_priv(mmc);
- struct dw_mci_board *brd = slot->host->pdata;
struct dw_mci *host = slot->host;
int gpio_cd = mmc_gpio_get_cd(mmc);
/* Use platform get_cd function, else try onboard card detect */
- if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
+ if ((mmc->caps & MMC_CAP_NEEDS_POLL) ||
(mmc->caps & MMC_CAP_NONREMOVABLE))
present = 1;
else if (!IS_ERR_VALUE(gpio_cd))
@@ -2840,23 +2839,13 @@ static void dw_mci_dto_timer(unsigned long arg)
}
#ifdef CONFIG_OF
-static struct dw_mci_of_quirks {
- char *quirk;
- int id;
-} of_quirks[] = {
- {
- .quirk = "broken-cd",
- .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
- },
-};
-
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
{
struct dw_mci_board *pdata;
struct device *dev = host->dev;
struct device_node *np = dev->of_node;
const struct dw_mci_drv_data *drv_data = host->drv_data;
- int idx, ret;
+ int ret;
u32 clock_frequency;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
@@ -2871,11 +2860,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
pdata->num_slots = 1;
}
- /* get quirks */
- for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
- if (of_get_property(np, of_quirks[idx].quirk, NULL))
- pdata->quirks |= of_quirks[idx].id;
-
if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
dev_info(dev,
"fifo-depth property not found, using value of FIFOTH register as default\n");
@@ -2908,18 +2892,19 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
static void dw_mci_enable_cd(struct dw_mci *host)
{
- struct dw_mci_board *brd = host->pdata;
unsigned long irqflags;
u32 temp;
int i;
+ struct dw_mci_slot *slot;
- /* No need for CD if broken card detection */
- if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
- return;
-
- /* No need for CD if all slots have a non-error GPIO */
+ /*
+ * No need for CD if all slots have a non-error GPIO
+ * as well as broken card detection is found.
+ */
for (i = 0; i < host->num_slots; i++) {
- struct dw_mci_slot *slot = host->slot[i];
+ slot = host->slot[i];
+ if (slot->mmc->caps & MMC_CAP_NEEDS_POLL)
+ return;
if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
break;
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 89df7ab..250d822 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -235,10 +235,8 @@ struct dw_mci_dma_ops {
};
/* IP Quirks/flags. */
-/* Unreliable card detection */
-#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(0)
/* Timer for broken data transfer over scheme */
-#define DW_MCI_QUIRK_BROKEN_DTO BIT(1)
+#define DW_MCI_QUIRK_BROKEN_DTO BIT(0)
struct dma_pdata;
--
2.3.7
next reply other threads:[~2016-01-21 6:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 6:52 Shawn Lin [this message]
2016-01-22 2:06 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453359172-5977-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=jh80.chung@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®