From: Alban Bedel <albeu@free.fr>
To: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <marc.zyngier@arm.com>,
Alexander Couzens <lynxis@fe80.eu>,
Joel Porquet <joel@porquet.org>,
linux-kernel@vger.kernel.org, Alban Bedel <albeu@free.fr>
Subject: [PATCH v2 2/2] MIPS: ath79: irq: Move the CPU IRQ driver to drivers/irqchip
Date: Sat, 23 Jan 2016 13:57:47 +0100 [thread overview]
Message-ID: <1453553867-27003-2-git-send-email-albeu@free.fr> (raw)
In-Reply-To: <1453553867-27003-1-git-send-email-albeu@free.fr>
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/mips/ath79/irq.c | 81 ++------------------------
arch/mips/include/asm/mach-ath79/ath79.h | 1 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ath79-cpu.c | 97 ++++++++++++++++++++++++++++++++
4 files changed, 105 insertions(+), 75 deletions(-)
create mode 100644 drivers/irqchip/irq-ath79-cpu.c
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 05b4514..2dfff1f 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -128,79 +128,10 @@ static void qca955x_irq_init(void)
irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
}
-/*
- * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
- * these devices typically allocate coherent DMA memory, however the
- * DMA controller may still have some unsynchronized data in the FIFO.
- * Issue a flush in the handlers to ensure that the driver sees
- * the update.
- *
- * This array map the interrupt lines to the DDR write buffer channels.
- */
-
-static unsigned irq_wb_chan[8] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
- int irq;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (!pending) {
- spurious_interrupt();
- return;
- }
-
- pending >>= CAUSEB_IP;
- while (pending) {
- irq = fls(pending) - 1;
- if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
- ath79_ddr_wb_flush(irq_wb_chan[irq]);
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
- pending &= ~BIT(irq);
- }
-}
-
-static int __init ar79_cpu_intc_of_init(
- struct device_node *node, struct device_node *parent)
-{
- int err, i, count;
-
- /* Fill the irq_wb_chan table */
- count = of_count_phandle_with_args(
- node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-
- for (i = 0; i < count; i++) {
- struct of_phandle_args args;
- u32 irq = i;
-
- of_property_read_u32_index(
- node, "qca,ddr-wb-channel-interrupts", i, &irq);
- if (irq >= ARRAY_SIZE(irq_wb_chan))
- continue;
-
- err = of_parse_phandle_with_args(
- node, "qca,ddr-wb-channels",
- "#qca,ddr-wb-channel-cells",
- i, &args);
- if (err)
- return err;
-
- irq_wb_chan[irq] = args.args[0];
- pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
- irq, args.args[0]);
- }
-
- return mips_cpu_irq_of_init(node, parent);
-}
-IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- ar79_cpu_intc_of_init);
-
void __init arch_init_irq(void)
{
+ unsigned irq_wb_chan2 = -1;
+ unsigned irq_wb_chan3 = -1;
bool misc_is_ar71xx;
if (mips_machtype == ATH79_MACH_GENERIC_OF) {
@@ -210,13 +141,13 @@ void __init arch_init_irq(void)
if (soc_is_ar71xx() || soc_is_ar724x() ||
soc_is_ar913x() || soc_is_ar933x()) {
- irq_wb_chan[2] = 3;
- irq_wb_chan[3] = 2;
+ irq_wb_chan2 = 3;
+ irq_wb_chan3 = 2;
} else if (soc_is_ar934x()) {
- irq_wb_chan[3] = 2;
+ irq_wb_chan3 = 2;
}
- mips_cpu_irq_init();
+ ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
if (soc_is_ar71xx() || soc_is_ar913x())
misc_is_ar71xx = true;
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 22a2f56..441faa9 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -144,6 +144,7 @@ static inline u32 ath79_reset_rr(unsigned reg)
void ath79_device_reset_set(u32 mask);
void ath79_device_reset_clear(u32 mask);
+void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
void ath79_misc_irq_init(void __iomem *regs, int irq,
int irq_base, bool is_ar71xx);
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index a8f9075..91c24ed 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_IRQCHIP) += irqchip.o
+obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
obj-$(CONFIG_ATH79) += irq-ath79-misc.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
diff --git a/drivers/irqchip/irq-ath79-cpu.c b/drivers/irqchip/irq-ath79-cpu.c
new file mode 100644
index 0000000..befe93c
--- /dev/null
+++ b/drivers/irqchip/irq-ath79-cpu.c
@@ -0,0 +1,97 @@
+/*
+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
+ *
+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/of.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mach-ath79/ath79.h>
+
+/*
+ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
+ * these devices typically allocate coherent DMA memory, however the
+ * DMA controller may still have some unsynchronized data in the FIFO.
+ * Issue a flush in the handlers to ensure that the driver sees
+ * the update.
+ *
+ * This array map the interrupt lines to the DDR write buffer channels.
+ */
+
+static unsigned irq_wb_chan[8] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+};
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned long pending;
+ int irq;
+
+ pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
+
+ pending >>= CAUSEB_IP;
+ while (pending) {
+ irq = fls(pending) - 1;
+ if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
+ ath79_ddr_wb_flush(irq_wb_chan[irq]);
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ pending &= ~BIT(irq);
+ }
+}
+
+static int __init ar79_cpu_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ int err, i, count;
+
+ /* Fill the irq_wb_chan table */
+ count = of_count_phandle_with_args(
+ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
+
+ for (i = 0; i < count; i++) {
+ struct of_phandle_args args;
+ u32 irq = i;
+
+ of_property_read_u32_index(
+ node, "qca,ddr-wb-channel-interrupts", i, &irq);
+ if (irq >= ARRAY_SIZE(irq_wb_chan))
+ continue;
+
+ err = of_parse_phandle_with_args(
+ node, "qca,ddr-wb-channels",
+ "#qca,ddr-wb-channel-cells",
+ i, &args);
+ if (err)
+ return err;
+
+ irq_wb_chan[irq] = args.args[0];
+ }
+
+ return mips_cpu_irq_of_init(node, parent);
+}
+IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
+ ar79_cpu_intc_of_init);
+
+void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
+{
+ irq_wb_chan[2] = irq_wb_chan2;
+ irq_wb_chan[3] = irq_wb_chan3;
+ mips_cpu_irq_init();
+}
--
2.0.0
next prev parent reply other threads:[~2016-01-23 12:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 12:57 [PATCH v2 1/2] MIPS: ath79: irq: Move the MISC " Alban Bedel
2016-01-23 12:57 ` Alban Bedel [this message]
2016-01-23 15:02 ` Marc Zyngier
2016-01-23 16:31 ` Jason Cooper
2016-02-17 13:15 ` Alban
2016-02-17 16:13 ` Jason Cooper
2016-02-17 21:17 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453553867-27003-2-git-send-email-albeu@free.fr \
--to=albeu@free.fr \
--cc=jason@lakedaemon.net \
--cc=joel@porquet.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=lynxis@fe80.eu \
--cc=marc.zyngier@arm.com \
--cc=ralf@linux-mips.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®