From: Arnd Bergmann <arnd@arndb.de>
To: "David S. Miller" <davem@davemloft.net>
Cc: linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/9] net: davinci_cpdma: use dma_addr_t for DMA address
Date: Wed, 27 Jan 2016 15:04:51 +0100 [thread overview]
Message-ID: <1453903507-3427225-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1453903507-3427225-1-git-send-email-arnd@arndb.de>
The davinci_cpdma mixes up physical addresses as seen from the CPU
and DMA addresses as seen from a DMA master, since it can operate
on both normal memory or an on-chip buffer. If dma_addr_t is
different from phys_addr_t, this means we get a compile-time warning
about the type mismatch:
ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
This slightly restructures the code so the address we use for
mapping RAM into a DMA address is always a dma_addr_t, avoiding
the warning. The code is correct even if both types are 32-bit
because the DMA master in this device only supports 32-bit addressing
anyway, independent of the types that are used.
We still assign this value to pool->phys, and that is wrong if
the driver is ever used with an IOMMU, but that value appears to
be never used, so there is no problem really. I've added a couple
of comments about where we do things that are slightly violating
the API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/ti/davinci_cpdma.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index 657b65bf5cac..18bf3a8fdc50 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -82,7 +82,7 @@ struct cpdma_desc {
struct cpdma_desc_pool {
phys_addr_t phys;
- u32 hw_addr;
+ dma_addr_t hw_addr;
void __iomem *iomap; /* ioremap map */
void *cpumap; /* dma_alloc map */
int desc_size, mem_size;
@@ -152,7 +152,7 @@ struct cpdma_chan {
* abstract out these details
*/
static struct cpdma_desc_pool *
-cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
+cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t hw_addr,
int size, int align)
{
int bitmap_size;
@@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
if (phys) {
pool->phys = phys;
- pool->iomap = ioremap(phys, size);
+ pool->iomap = ioremap(phys, size); /* should be memremap? */
pool->hw_addr = hw_addr;
} else {
- pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
+ pool->cpumap = dma_alloc_coherent(dev, size, &pool->hw_addr,
GFP_KERNEL);
- pool->iomap = pool->cpumap;
- pool->hw_addr = pool->phys;
+ pool->iomap = (void __iomem __force *)pool->cpumap;
+ pool->phys = pool->hw_addr; /* assumes no IOMMU, don't use this value */
}
if (pool->iomap)
--
2.7.0
next parent reply other threads:[~2016-01-27 14:06 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1453903507-3427225-1-git-send-email-arnd@arndb.de>
2016-01-27 14:04 ` Arnd Bergmann [this message]
2016-01-27 14:04 ` [PATCH 2/9] net: hp100: remove unnecessary #ifdefs Arnd Bergmann
2016-01-27 14:04 ` [PATCH 3/9] net: bgmac: clarify CONFIG_BCMA dependency Arnd Bergmann
2016-01-27 16:11 ` Paul Gortmaker
2016-01-28 8:49 ` Arnd Bergmann
2016-01-27 14:04 ` [PATCH 4/9] net: moxart: use correct accessors for DMA memory Arnd Bergmann
2016-01-28 12:36 ` David Laight
2016-01-28 16:53 ` Arnd Bergmann
2016-01-28 16:58 ` Arnd Bergmann
2016-01-27 14:04 ` [PATCH 5/9] net: fddi/defxx: avoid warning about uninitialized variable use Arnd Bergmann
2016-01-27 15:15 ` Maciej W. Rozycki
2016-01-27 14:04 ` [PATCH 6/9] net: vxge: avoid unused function warnings Arnd Bergmann
2016-01-27 14:04 ` [PATCH 7/9] net: macb: avoid uninitialized variables Arnd Bergmann
2016-01-27 15:51 ` Nicolas Ferre
2016-01-27 16:04 ` Nicolas Ferre
2016-01-28 16:32 ` Arnd Bergmann
2016-01-28 13:27 ` Sergei Shtylyov
2016-01-27 14:04 ` [PATCH 8/9] net: nb8800: avoid uninitialized variable warning Arnd Bergmann
2016-01-27 14:13 ` Måns Rullgård
2016-01-27 15:21 ` Arnd Bergmann
2016-01-27 14:04 ` [PATCH 9/9] net: tg3: " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453903507-3427225-2-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®